mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-26 05:34:30 +08:00
f981e66ed4
Rename nx25 as ax25 ae250 as ae350 nx25-ae250 as ax25-ae350 including filename, variable, string and definition. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
276 lines
10 KiB
Plaintext
276 lines
10 KiB
Plaintext
Andes Technology SoC AE350
|
|
===========================
|
|
|
|
AE350 is the mainline SoC produced by Andes Technology using AX25 CPU core
|
|
base on RISC-V architecture.
|
|
|
|
AE350 has integrated both AHB and APB bus and many periphals for application
|
|
and product development.
|
|
|
|
AX25-AE350
|
|
=========
|
|
|
|
AX25-AE350 is the SoC with AE350 hardcore CPU.
|
|
|
|
Configurations
|
|
==============
|
|
|
|
CONFIG_SKIP_LOWLEVEL_INIT:
|
|
If you want to boot this system from SPI ROM and bypass e-bios (the
|
|
other boot loader on ROM). You should undefine CONFIG_SKIP_LOWLEVEL_INIT
|
|
in "include/configs/ax25-ae350.h".
|
|
|
|
Build and boot steps
|
|
====================
|
|
|
|
build:
|
|
1. Prepare the toolchains and make sure the $PATH to toolchains is correct.
|
|
2. Use `make ax25-ae350_defconfig` in u-boot root to build the image.
|
|
|
|
Verification
|
|
====================
|
|
|
|
Target
|
|
====================
|
|
1. startup
|
|
2. relocation
|
|
3. timer driver
|
|
4. uart driver
|
|
5. mac driver
|
|
6. mmc driver
|
|
7. spi driver
|
|
|
|
Steps
|
|
====================
|
|
1. Define CONFIG_SKIP_LOWLEVEL_INIT to build u-boot which is loaded via gdb from ram.
|
|
2. Undefine CONFIG_SKIP_LOWLEVEL_INIT to build u-boot which is booted from spi rom.
|
|
3. Ping a server by mac driver
|
|
4. Scan sd card and copy u-boot image which is booted from flash to ram by sd driver.
|
|
5. Burn this u-boot image to spi rom by spi driver
|
|
6. Re-boot u-boot from spi flash with power off and power on.
|
|
|
|
Messages of U-Boot boot on AE350 board
|
|
======================================
|
|
U-Boot 2018.01-rc2-00033-g824f89a (Dec 21 2017 - 16:51:26 +0800)
|
|
|
|
DRAM: 1 GiB
|
|
MMC: mmc@f0e00000: 0
|
|
SF: Detected mx25u1635e with page size 256 Bytes, erase size 4 KiB, total 2 MiB
|
|
In: serial@f0300000
|
|
Out: serial@f0300000
|
|
Err: serial@f0300000
|
|
Net:
|
|
Warning: mac@e0100000 (eth0) using random MAC address - be:dd:d7:e4:e8:10
|
|
eth0: mac@e0100000
|
|
|
|
RISC-V # version
|
|
U-Boot 2018.01-rc2-00033-gb265b91-dirty (Dec 22 2017 - 13:54:21 +0800)
|
|
|
|
riscv32-unknown-linux-gnu-gcc (GCC) 7.2.0
|
|
GNU ld (GNU Binutils) 2.29
|
|
|
|
RISC-V # setenv ipaddr 10.0.4.200 ;
|
|
RISC-V # setenv serverip 10.0.4.97 ;
|
|
RISC-V # ping 10.0.4.97 ;
|
|
Using mac@e0100000 device
|
|
host 10.0.4.97 is alive
|
|
|
|
RISC-V # mmc rescan
|
|
RISC-V # fatls mmc 0:1
|
|
318907 u-boot-ae350-64.bin
|
|
1252 hello_world_ae350_32.bin
|
|
328787 u-boot-ae350-32.bin
|
|
|
|
3 file(s), 0 dir(s)
|
|
|
|
RISC-V # sf probe 0:0 50000000 0
|
|
SF: Detected mx25u1635e with page size 256 Bytes, erase size 4 KiB, total 2 MiB
|
|
|
|
RISC-V # sf test 0x100000 0x1000
|
|
SPI flash test:
|
|
0 erase: 36 ticks, 111 KiB/s 0.888 Mbps
|
|
1 check: 29 ticks, 137 KiB/s 1.096 Mbps
|
|
2 write: 40 ticks, 100 KiB/s 0.800 Mbps
|
|
3 read: 20 ticks, 200 KiB/s 1.600 Mbps
|
|
Test passed
|
|
0 erase: 36 ticks, 111 KiB/s 0.888 Mbps
|
|
1 check: 29 ticks, 137 KiB/s 1.096 Mbps
|
|
2 write: 40 ticks, 100 KiB/s 0.800 Mbps
|
|
3 read: 20 ticks, 200 KiB/s 1.600 Mbps
|
|
|
|
RISC-V # fatload mmc 0:1 0x600000 u-boot-ae350-32.bin
|
|
reading u-boot-ae350-32.bin
|
|
328787 bytes read in 324 ms (990.2 KiB/s)
|
|
|
|
RISC-V # sf erase 0x0 0x51000
|
|
SF: 331776 bytes @ 0x0 Erased: OK
|
|
|
|
RISC-V # sf write 0x600000 0x0 0x50453
|
|
device 0 offset 0x0, size 0x50453
|
|
SF: 328787 bytes @ 0x0 Written: OK
|
|
|
|
RISC-V # crc32 0x600000 0x50453
|
|
crc32 for 00600000 ... 00650452 ==> 692dc44a
|
|
|
|
RISC-V # crc32 0x80000000 0x50453
|
|
crc32 for 80000000 ... 80050452 ==> 692dc44a
|
|
RISC-V #
|
|
|
|
*** power-off and power-on, this U-Boot is booted from spi flash ***
|
|
|
|
U-Boot 2018.01-rc2-00032-gf67dd47-dirty (Dec 21 2017 - 13:56:03 +0800)
|
|
|
|
DRAM: 1 GiB
|
|
MMC: mmc@f0e00000: 0
|
|
SF: Detected mx25u1635e with page size 256 Bytes, erase size 4 KiB, total 2 MiB
|
|
In: serial@f0300000
|
|
Out: serial@f0300000
|
|
Err: serial@f0300000
|
|
Net:
|
|
Warning: mac@e0100000 (eth0) using random MAC address - ee:4c:58:29:32:f5
|
|
eth0: mac@e0100000
|
|
RISC-V #
|
|
|
|
|
|
Boot bbl and riscv-linux via U-Boot on QEMU
|
|
===========================================
|
|
1. Build riscv-linux
|
|
2. Build bbl and riscv-linux with --with-payload
|
|
3. Prepare ae350.dtb
|
|
4. Creating OS-kernel images
|
|
./mkimage -A riscv -O linux -T kernel -C none -a 0x0000 -e 0x0000 -d bbl.bin bootmImage-bbl.bin
|
|
Image Name:
|
|
Created: Tue Mar 13 10:06:42 2018
|
|
Image Type: RISC-V Linux Kernel Image (uncompressed)
|
|
Data Size: 17901204 Bytes = 17481.64 KiB = 17.07 MiB
|
|
Load Address: 00000000
|
|
Entry Point: 00000000
|
|
|
|
4. Copy bootmImage-bbl.bin and ae350.dtb to qemu sd card image
|
|
5. Message of booting riscv-linux from bbl via u-boot on qemu
|
|
|
|
U-Boot 2018.03-rc4-00031-g2631273 (Mar 13 2018 - 15:02:55 +0800)
|
|
|
|
DRAM: 1 GiB
|
|
main-loop: WARNING: I/O thread spun for 1000 iterations
|
|
MMC: mmc@f0e00000: 0
|
|
Loading Environment from SPI Flash... *** Warning - spi_flash_probe_bus_cs() failed, using default environment
|
|
|
|
Failed (-22)
|
|
In: serial@f0300000
|
|
Out: serial@f0300000
|
|
Err: serial@f0300000
|
|
Net:
|
|
Warning: mac@e0100000 (eth0) using random MAC address - 02:00:00:00:00:00
|
|
eth0: mac@e0100000
|
|
RISC-V # mmc rescan
|
|
RISC-V # mmc part
|
|
|
|
Partition Map for MMC device 0 -- Partition Type: DOS
|
|
|
|
Part Start Sector Num Sectors UUID Type
|
|
RISC-V # fatls mmc 0:0
|
|
17901268 bootmImage-bbl.bin
|
|
1954 ae2xx.dtb
|
|
|
|
2 file(s), 0 dir(s)
|
|
|
|
RISC-V # fatload mmc 0:0 0x00600000 bootmImage-bbl.bin
|
|
17901268 bytes read in 4642 ms (3.7 MiB/s)
|
|
RISC-V # fatload mmc 0:0 0x2000000 ae350.dtb
|
|
1954 bytes read in 1 ms (1.9 MiB/s)
|
|
RISC-V # setenv bootm_size 0x2000000
|
|
RISC-V # setenv fdt_high 0x1f00000
|
|
RISC-V # bootm 0x00600000 - 0x2000000
|
|
## Booting kernel from Legacy Image at 00600000 ...
|
|
Image Name:
|
|
Image Type: RISC-V Linux Kernel Image (uncompressed)
|
|
Data Size: 17901204 Bytes = 17.1 MiB
|
|
Load Address: 00000000
|
|
Entry Point: 00000000
|
|
Verifying Checksum ... OK
|
|
## Flattened Device Tree blob at 02000000
|
|
Booting using the fdt blob at 0x2000000
|
|
Loading Kernel Image ... OK
|
|
Loading Device Tree to 0000000001efc000, end 0000000001eff7a1 ... OK
|
|
[ 0.000000] OF: fdt: Ignoring memory range 0x0 - 0x200000
|
|
[ 0.000000] Linux version 4.14.0-00046-gf3e439f-dirty (rick@atcsqa06) (gcc version 7.1.1 20170509 (GCC)) #1 Tue Jan 9 16:34:25 CST 2018
|
|
[ 0.000000] bootconsole [early0] enabled
|
|
[ 0.000000] Initial ramdisk at: 0xffffffe000016a98 (12267008 bytes)
|
|
[ 0.000000] Zone ranges:
|
|
[ 0.000000] DMA [mem 0x0000000000200000-0x000000007fffffff]
|
|
[ 0.000000] Normal empty
|
|
[ 0.000000] Movable zone start for each node
|
|
[ 0.000000] Early memory node ranges
|
|
[ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
|
|
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
|
|
[ 0.000000] elf_hwcap is 0x112d
|
|
[ 0.000000] random: fast init done
|
|
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516615
|
|
[ 0.000000] Kernel command line: console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0xf0300000 debug loglevel=7
|
|
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
|
|
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
|
|
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
|
|
[ 0.000000] Sorting __ex_table...
|
|
[ 0.000000] Memory: 2047832K/2095104K available (1856K kernel code, 204K rwdata, 532K rodata, 12076K init, 756K bss, 47272K reserved, 0K cma-reserved)
|
|
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
|
|
[ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
|
|
[ 0.000000] riscv,cpu_intc,0: 64 local interrupts mapped
|
|
[ 0.000000] riscv,plic0,e4000000: mapped 31 interrupts to 1/2 handlers
|
|
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
|
|
[ 0.000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
|
|
[ 0.000000] pid_max: default: 32768 minimum: 301
|
|
[ 0.004000] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
|
|
[ 0.004000] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
|
|
[ 0.056000] devtmpfs: initialized
|
|
[ 0.060000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
|
|
[ 0.064000] futex hash table entries: 256 (order: 0, 6144 bytes)
|
|
[ 0.068000] NET: Registered protocol family 16
|
|
[ 0.080000] vgaarb: loaded
|
|
[ 0.084000] clocksource: Switched to clocksource riscv_clocksource
|
|
[ 0.088000] NET: Registered protocol family 2
|
|
[ 0.092000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
|
|
[ 0.096000] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
|
|
[ 0.096000] TCP: Hash tables configured (established 16384 bind 16384)
|
|
[ 0.100000] UDP hash table entries: 1024 (order: 3, 32768 bytes)
|
|
[ 0.100000] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
|
|
[ 0.104000] NET: Registered protocol family 1
|
|
[ 0.616000] Unpacking initramfs...
|
|
[ 1.220000] workingset: timestamp_bits=62 max_order=19 bucket_order=0
|
|
[ 1.244000] io scheduler noop registered
|
|
[ 1.244000] io scheduler cfq registered (default)
|
|
[ 1.244000] io scheduler mq-deadline registered
|
|
[ 1.248000] io scheduler kyber registered
|
|
[ 1.360000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
|
|
[ 1.368000] console [ttyS0] disabled
|
|
[ 1.372000] f0300000.serial: ttyS0 at MMIO 0xf0300020 (irq = 10, base_baud = 1228800) is a 16550A
|
|
[ 1.392000] console [ttyS0] enabled
|
|
[ 1.392000] ftmac100: Loading version 0.2 ...
|
|
[ 1.396000] ftmac100 e0100000.mac eth0: irq 8, mapped at ffffffd002005000
|
|
[ 1.400000] ftmac100 e0100000.mac eth0: generated random MAC address 6e:ac:c3:92:36:c0
|
|
[ 1.404000] IR NEC protocol handler initialized
|
|
[ 1.404000] IR RC5(x/sz) protocol handler initialized
|
|
[ 1.404000] IR RC6 protocol handler initialized
|
|
[ 1.404000] IR JVC protocol handler initialized
|
|
[ 1.408000] IR Sony protocol handler initialized
|
|
[ 1.408000] IR SANYO protocol handler initialized
|
|
[ 1.408000] IR Sharp protocol handler initialized
|
|
[ 1.408000] IR MCE Keyboard/mouse protocol handler initialized
|
|
[ 1.412000] IR XMP protocol handler initialized
|
|
[ 1.456000] ftsdc010 f0e00000.mmc: mmc0 - using hw SDIO IRQ
|
|
[ 1.464000] bootconsole [early0] uses init memory and must be disabled even before the real one is ready
|
|
[ 1.464000] bootconsole [early0] disabled
|
|
[ 1.508000] Freeing unused kernel memory: 12076K
|
|
[ 1.512000] This architecture does not have kernel memory protection.
|
|
[ 1.520000] mmc0: new SD card at address 4567
|
|
[ 1.524000] mmcblk0: mmc0:4567 QEMU! 20.0 MiB
|
|
[ 1.844000] mmcblk0:
|
|
Wed Dec 1 10:00:00 CST 2010
|
|
/ #
|
|
|
|
|
|
|
|
TODO
|
|
==================================================
|
|
Boot bbl and riscv-linux via U-Boot on AE350 board
|