u-boot/configs/uniphier_v8_defconfig
Masahiro Yamada 92edfff6c6 ARM: uniphier_v8_defconfig: make 64bit SoC image position independent
For a planned new SoC in this SoC family, the base address of the
DRAM will be changed from 0x80000000 to 0x20000000.

The PIE support will be useful to maintain multiple similar SoCs
whose DRAM addresses differ.

Now CONFIG_SYS_TEXT_BASE is not important. I just set it to 0
to ensure CONFIG_POSITION_INDEPENDENT is working.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:37:23 +09:00

64 lines
1.6 KiB
Plaintext

CONFIG_ARM=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_INIT_SP_RELATIVE=y
CONFIG_ARM_SMCCC=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=3
CONFIG_ARCH_UNIPHIER_V8_MULTI=y
CONFIG_MICRO_SUPPORT_CARD=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="env exist ${bootdev}preboot && run ${bootdev}preboot"
CONFIG_LOGLEVEL=6
CONFIG_CMD_CONFIG=y
CONFIG_CMD_IMLS=y
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=uniphier-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=uniphier-nand.0:1m(firmware),-(UBI)"
CONFIG_CMD_UBI=y
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld20-ref"
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_GPIO_UNIPHIER=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_HS200_SUPPORT=y
CONFIG_MMC_UNIPHIER=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_NAND=y
CONFIG_NAND_DENALI_DT=y
CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
CONFIG_DM_ETH=y
CONFIG_SNI_AVE=y
CONFIG_PINCONF=y
CONFIG_SYSRESET=y
CONFIG_SYSRESET_PSCI=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_UNIPHIER=y
CONFIG_PANIC_HANG=y
CONFIG_FDT_FIXUP_PARTITIONS=y