u-boot/configs/kp_imx6q_tpc_defconfig
Lukasz Majewski f6a4df3846 imx: Enable RTC (ds1307) support in the U-Boot proper on TPC70 board
The TPC70 is equipped with DS1307 RTC device. Add code to enable support
for it.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00

77 lines
1.9 KiB
Plaintext

CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SYS_TEXT_BASE=0x17800000
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2200
CONFIG_MX6_DDRCAL=y
CONFIG_TARGET_KP_IMX6Q_TPC=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_SD_BOOT=y
CONFIG_BOOTDELAY=3
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_SPL_RAW_IMAGE_SUPPORT=y
CONFIG_SPL_PAYLOAD="u-boot.img"
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_STOP_STR="."
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT4_WRITE=y
# CONFIG_ISO_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="imx6q-kp"
CONFIG_OF_SPL_REMOVE_PROPS="interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents interrupts dmas dma-names"
CONFIG_ENV_IS_IN_MMC=y
# CONFIG_BLOCK_CACHE is not set
CONFIG_SPL_CLK_IMX6Q=y
CONFIG_CLK_IMX6Q=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_SYS_I2C_MXC=y
CONFIG_SYS_I2C_MXC_I2C1=y
CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_ATHEROS=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_SPL_DM_REGULATOR_FIXED=y
CONFIG_DM_RTC=y
CONFIG_RTC_DS1307=y
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
CONFIG_MXC_UART=y
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y
CONFIG_SYSRESET_WATCHDOG=y
CONFIG_IMX_THERMAL=y
CONFIG_USB=y
# CONFIG_SPL_DM_USB is not set
CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
CONFIG_IMX_WATCHDOG=y