u-boot/include/configs/rk3399_common.h
Kever Yang 6d1970fa8a rockchip: add sdram_common for common functions
There are some functions like sdram_size_mb can be re-used for
different rockchip SoCs, just put them into common file.
Add board_get_usable_ram_top() for ram_top init base on
SDRAM_MAX_SIZE.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Added SDRAM_MAX_SIZE definition for RK3036:
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

fixup: 3036 fix for sdram_common
2017-07-11 12:13:44 +02:00

89 lines
2.2 KiB
C

/*
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_RK3399_COMMON_H
#define __CONFIG_RK3399_COMMON_H
#include "rockchip-common.h"
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#if defined(CONFIG_SPL_SPI_SUPPORT)
#define CONFIG_SPL_SPI_LOAD
#endif
#define COUNTER_FREQUENCY 24000000
#define CONFIG_SYS_NS16550_MEM32
#define CONFIG_SYS_TEXT_BASE 0x00200000
#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
#define CONFIG_SYS_LOAD_ADDR 0x00800800
#define CONFIG_SPL_STACK 0xff8effff
#define CONFIG_SPL_TEXT_BASE 0xff8c2000
#define CONFIG_SPL_MAX_SIZE 0x30000 - 0x2000
/* BSS setup */
#define CONFIG_SPL_BSS_START_ADDR 0xff8e0000
#define CONFIG_SPL_BSS_MAX_SIZE 0x10000
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
/* MMC/SD IP block */
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ 200000000
#define CONFIG_SUPPORT_VFAT
#define CONFIG_FS_EXT4
/* RAW SD card / eMMC locations. */
#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
/* FAT sd card locations. */
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SYS_SDRAM_BASE 0
#define SDRAM_MAX_SIZE 0xf8000000
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SF_DEFAULT_SPEED 20000000
#ifndef CONFIG_SPL_BUILD
#define ENV_MEM_LAYOUT_SETTINGS \
"scriptaddr=0x00500000\0" \
"pxefile_addr_r=0x00600000\0" \
"fdt_addr_r=0x01f00000\0" \
"kernel_addr_r=0x02000000\0" \
"ramdisk_addr_r=0x04000000\0"
#include <config_distro_bootcmd.h>
#define CONFIG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
"partitions=" PARTS_DEFAULT \
BOOTENV
#endif
/* enable usb config for usb ether */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_ASIX88179
#define CONFIG_USB_ETHER_MCS7830
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_ETHER_RTL8152
/* rockchip xhci host driver */
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#endif