mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-27 22:56:49 +08:00
cd529f7ad6
In order to ensure that the eDP registers are in correct state, add missing support for the eDP reset lines found in the device-tree. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-by: Peter Robinson <pbrobinson@gmail.com>
1174 lines
27 KiB
C
1174 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2015 Google, Inc
|
|
* Copyright 2014 Rockchip Inc.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <display.h>
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <edid.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <panel.h>
|
|
#include <regmap.h>
|
|
#include <reset.h>
|
|
#include <syscon.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch-rockchip/clock.h>
|
|
#include <asm/arch-rockchip/hardware.h>
|
|
#include <asm/arch-rockchip/edp_rk3288.h>
|
|
#include <asm/arch-rockchip/grf_rk3288.h>
|
|
#include <asm/arch-rockchip/grf_rk3399.h>
|
|
|
|
#define MAX_CR_LOOP 5
|
|
#define MAX_EQ_LOOP 5
|
|
#define DP_LINK_STATUS_SIZE 6
|
|
|
|
static const char * const voltage_names[] = {
|
|
"0.4V", "0.6V", "0.8V", "1.2V"
|
|
};
|
|
static const char * const pre_emph_names[] = {
|
|
"0dB", "3.5dB", "6dB", "9.5dB"
|
|
};
|
|
|
|
#define DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_1200
|
|
#define DP_PRE_EMPHASIS_MAX DP_TRAIN_PRE_EMPHASIS_9_5
|
|
|
|
#define RK3288_GRF_SOC_CON6 0x025c
|
|
#define RK3288_GRF_SOC_CON12 0x0274
|
|
#define RK3399_GRF_SOC_CON20 0x6250
|
|
#define RK3399_GRF_SOC_CON25 0x6264
|
|
|
|
enum rockchip_dp_types {
|
|
RK3288_DP = 0,
|
|
RK3399_EDP
|
|
};
|
|
|
|
struct rockchip_dp_data {
|
|
unsigned long reg_vop_big_little;
|
|
unsigned long reg_vop_big_little_sel;
|
|
unsigned long reg_ref_clk_sel;
|
|
unsigned long ref_clk_sel_bit;
|
|
enum rockchip_dp_types chip_type;
|
|
};
|
|
|
|
struct rk_edp_priv {
|
|
struct rk3288_edp *regs;
|
|
void *grf;
|
|
struct udevice *panel;
|
|
struct link_train link_train;
|
|
u8 train_set[4];
|
|
};
|
|
|
|
static void rk_edp_init_refclk(struct rk3288_edp *regs, enum rockchip_dp_types chip_type)
|
|
{
|
|
writel(SEL_24M, ®s->analog_ctl_2);
|
|
u32 reg;
|
|
|
|
reg = REF_CLK_24M;
|
|
if (chip_type == RK3288_DP)
|
|
reg ^= REF_CLK_MASK;
|
|
writel(reg, ®s->pll_reg_1);
|
|
|
|
|
|
writel(LDO_OUTPUT_V_SEL_145 | KVCO_DEFALUT | CHG_PUMP_CUR_SEL_5US |
|
|
V2L_CUR_SEL_1MA, ®s->pll_reg_2);
|
|
|
|
writel(LOCK_DET_CNT_SEL_256 | LOOP_FILTER_RESET | PALL_SSC_RESET |
|
|
LOCK_DET_BYPASS | PLL_LOCK_DET_MODE | PLL_LOCK_DET_FORCE,
|
|
®s->pll_reg_3);
|
|
|
|
writel(REGULATOR_V_SEL_950MV | STANDBY_CUR_SEL |
|
|
CHG_PUMP_INOUT_CTRL_1200MV | CHG_PUMP_INPUT_CTRL_OP,
|
|
®s->pll_reg_5);
|
|
|
|
writel(SSC_OFFSET | SSC_MODE | SSC_DEPTH, ®s->ssc_reg);
|
|
|
|
writel(TX_SWING_PRE_EMP_MODE | PRE_DRIVER_PW_CTRL1 |
|
|
LP_MODE_CLK_REGULATOR | RESISTOR_MSB_CTRL | RESISTOR_CTRL,
|
|
®s->tx_common);
|
|
|
|
writel(DP_AUX_COMMON_MODE | DP_AUX_EN | AUX_TERM_50OHM,
|
|
®s->dp_aux);
|
|
|
|
writel(DP_BG_OUT_SEL | DP_DB_CUR_CTRL | DP_BG_SEL | DP_RESISTOR_TUNE_BG,
|
|
®s->dp_bias);
|
|
|
|
writel(CH1_CH3_SWING_EMP_CTRL | CH0_CH2_SWING_EMP_CTRL,
|
|
®s->dp_reserv2);
|
|
}
|
|
|
|
static void rk_edp_init_interrupt(struct rk3288_edp *regs)
|
|
{
|
|
/* Set interrupt pin assertion polarity as high */
|
|
writel(INT_POL, ®s->int_ctl);
|
|
|
|
/* Clear pending registers */
|
|
writel(0xff, ®s->common_int_sta_1);
|
|
writel(0x4f, ®s->common_int_sta_2);
|
|
writel(0xff, ®s->common_int_sta_3);
|
|
writel(0x27, ®s->common_int_sta_4);
|
|
writel(0x7f, ®s->dp_int_sta);
|
|
|
|
/* 0:mask,1: unmask */
|
|
writel(0x00, ®s->common_int_mask_1);
|
|
writel(0x00, ®s->common_int_mask_2);
|
|
writel(0x00, ®s->common_int_mask_3);
|
|
writel(0x00, ®s->common_int_mask_4);
|
|
writel(0x00, ®s->int_sta_mask);
|
|
}
|
|
|
|
static void rk_edp_enable_sw_function(struct rk3288_edp *regs)
|
|
{
|
|
clrbits_le32(®s->func_en_1, SW_FUNC_EN_N);
|
|
}
|
|
|
|
static bool rk_edp_get_pll_locked(struct rk3288_edp *regs)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(®s->dp_debug_ctl);
|
|
|
|
return val & PLL_LOCK;
|
|
}
|
|
|
|
static int rk_edp_init_analog_func(struct rk3288_edp *regs)
|
|
{
|
|
ulong start;
|
|
|
|
writel(0x00, ®s->dp_pd);
|
|
writel(PLL_LOCK_CHG, ®s->common_int_sta_1);
|
|
|
|
clrbits_le32(®s->dp_debug_ctl, F_PLL_LOCK | PLL_LOCK_CTRL);
|
|
|
|
start = get_timer(0);
|
|
while (!rk_edp_get_pll_locked(regs)) {
|
|
if (get_timer(start) > PLL_LOCK_TIMEOUT) {
|
|
printf("%s: PLL is not locked\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
/* Enable Serdes FIFO function and Link symbol clock domain module */
|
|
clrbits_le32(®s->func_en_2, SERDES_FIFO_FUNC_EN_N |
|
|
LS_CLK_DOMAIN_FUNC_EN_N | AUX_FUNC_EN_N |
|
|
SSC_FUNC_EN_N);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rk_edp_init_aux(struct rk3288_edp *regs)
|
|
{
|
|
/* Clear inerrupts related to AUX channel */
|
|
writel(AUX_FUNC_EN_N, ®s->dp_int_sta);
|
|
|
|
/* Disable AUX channel module */
|
|
setbits_le32(®s->func_en_2, AUX_FUNC_EN_N);
|
|
|
|
/* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
|
|
writel(DEFER_CTRL_EN | DEFER_COUNT(1), ®s->aux_ch_defer_dtl);
|
|
|
|
/* Enable AUX channel module */
|
|
clrbits_le32(®s->func_en_2, AUX_FUNC_EN_N);
|
|
}
|
|
|
|
static int rk_edp_aux_enable(struct rk3288_edp *regs)
|
|
{
|
|
ulong start;
|
|
|
|
setbits_le32(®s->aux_ch_ctl_2, AUX_EN);
|
|
start = get_timer(0);
|
|
do {
|
|
if (!(readl(®s->aux_ch_ctl_2) & AUX_EN))
|
|
return 0;
|
|
} while (get_timer(start) < 20);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int rk_edp_is_aux_reply(struct rk3288_edp *regs)
|
|
{
|
|
ulong start;
|
|
|
|
start = get_timer(0);
|
|
while (!(readl(®s->dp_int_sta) & RPLY_RECEIV)) {
|
|
if (get_timer(start) > 10)
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
writel(RPLY_RECEIV, ®s->dp_int_sta);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk_edp_start_aux_transaction(struct rk3288_edp *regs)
|
|
{
|
|
int val, ret;
|
|
|
|
/* Enable AUX CH operation */
|
|
ret = rk_edp_aux_enable(regs);
|
|
if (ret) {
|
|
debug("AUX CH enable timeout!\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Is AUX CH command reply received? */
|
|
if (rk_edp_is_aux_reply(regs)) {
|
|
debug("AUX CH command reply failed!\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Clear interrupt source for AUX CH access error */
|
|
val = readl(®s->dp_int_sta);
|
|
if (val & AUX_ERR) {
|
|
writel(AUX_ERR, ®s->dp_int_sta);
|
|
return -EIO;
|
|
}
|
|
|
|
/* Check AUX CH error access status */
|
|
val = readl(®s->dp_int_sta);
|
|
if (val & AUX_STATUS_MASK) {
|
|
debug("AUX CH error happens: %d\n\n", val & AUX_STATUS_MASK);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk_edp_dpcd_transfer(struct rk3288_edp *regs,
|
|
unsigned int val_addr, u8 *in_data,
|
|
unsigned int length,
|
|
enum dpcd_request request)
|
|
{
|
|
int val;
|
|
int i, try_times;
|
|
u8 *data;
|
|
int ret = 0;
|
|
u32 len = 0;
|
|
|
|
while (length) {
|
|
len = min(length, 16U);
|
|
for (try_times = 0; try_times < 10; try_times++) {
|
|
data = in_data;
|
|
/* Clear AUX CH data buffer */
|
|
writel(BUF_CLR, ®s->buf_data_ctl);
|
|
|
|
/* Select DPCD device address */
|
|
writel(AUX_ADDR_7_0(val_addr), ®s->aux_addr_7_0);
|
|
writel(AUX_ADDR_15_8(val_addr), ®s->aux_addr_15_8);
|
|
writel(AUX_ADDR_19_16(val_addr), ®s->aux_addr_19_16);
|
|
|
|
/*
|
|
* Set DisplayPort transaction and read 1 byte
|
|
* If bit 3 is 1, DisplayPort transaction.
|
|
* If Bit 3 is 0, I2C transaction.
|
|
*/
|
|
if (request == DPCD_WRITE) {
|
|
val = AUX_LENGTH(len) |
|
|
AUX_TX_COMM_DP_TRANSACTION |
|
|
AUX_TX_COMM_WRITE;
|
|
for (i = 0; i < len; i++)
|
|
writel(*data++, ®s->buf_data[i]);
|
|
} else
|
|
val = AUX_LENGTH(len) |
|
|
AUX_TX_COMM_DP_TRANSACTION |
|
|
AUX_TX_COMM_READ;
|
|
|
|
writel(val, ®s->aux_ch_ctl_1);
|
|
|
|
/* Start AUX transaction */
|
|
ret = rk_edp_start_aux_transaction(regs);
|
|
if (ret == 0)
|
|
break;
|
|
else
|
|
printf("read dpcd Aux Transaction fail!\n");
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (request == DPCD_READ) {
|
|
for (i = 0; i < len; i++)
|
|
*data++ = (u8)readl(®s->buf_data[i]);
|
|
}
|
|
|
|
length -= len;
|
|
val_addr += len;
|
|
in_data += len;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk_edp_dpcd_read(struct rk3288_edp *regs, u32 addr, u8 *values,
|
|
size_t size)
|
|
{
|
|
return rk_edp_dpcd_transfer(regs, addr, values, size, DPCD_READ);
|
|
}
|
|
|
|
static int rk_edp_dpcd_write(struct rk3288_edp *regs, u32 addr, u8 *values,
|
|
size_t size)
|
|
{
|
|
return rk_edp_dpcd_transfer(regs, addr, values, size, DPCD_WRITE);
|
|
}
|
|
|
|
|
|
static int rk_edp_link_power_up(struct rk_edp_priv *edp)
|
|
{
|
|
u8 value;
|
|
int ret;
|
|
|
|
/* DP_SET_POWER register is only available on DPCD v1.1 and later */
|
|
if (edp->link_train.revision < 0x11)
|
|
return 0;
|
|
|
|
ret = rk_edp_dpcd_read(edp->regs, DPCD_LINK_POWER_STATE, &value, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
value &= ~DP_SET_POWER_MASK;
|
|
value |= DP_SET_POWER_D0;
|
|
|
|
ret = rk_edp_dpcd_write(edp->regs, DPCD_LINK_POWER_STATE, &value, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* According to the DP 1.1 specification, a "Sink Device must exit the
|
|
* power saving state within 1 ms" (Section 2.5.3.1, Table 5-52, "Sink
|
|
* Control Field" (register 0x600).
|
|
*/
|
|
mdelay(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk_edp_link_configure(struct rk_edp_priv *edp)
|
|
{
|
|
u8 values[2];
|
|
|
|
values[0] = edp->link_train.link_rate;
|
|
values[1] = edp->link_train.lane_count;
|
|
|
|
return rk_edp_dpcd_write(edp->regs, DPCD_LINK_BW_SET, values,
|
|
sizeof(values));
|
|
}
|
|
|
|
static void rk_edp_set_link_training(struct rk_edp_priv *edp,
|
|
const u8 *training_values)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < edp->link_train.lane_count; i++)
|
|
writel(training_values[i], &edp->regs->ln_link_trn_ctl[i]);
|
|
}
|
|
|
|
static u8 edp_link_status(const u8 *link_status, int r)
|
|
{
|
|
return link_status[r - DPCD_LANE0_1_STATUS];
|
|
}
|
|
|
|
static int rk_edp_dpcd_read_link_status(struct rk_edp_priv *edp,
|
|
u8 *link_status)
|
|
{
|
|
return rk_edp_dpcd_read(edp->regs, DPCD_LANE0_1_STATUS, link_status,
|
|
DP_LINK_STATUS_SIZE);
|
|
}
|
|
|
|
static u8 edp_get_lane_status(const u8 *link_status, int lane)
|
|
{
|
|
int i = DPCD_LANE0_1_STATUS + (lane >> 1);
|
|
int s = (lane & 1) * 4;
|
|
u8 l = edp_link_status(link_status, i);
|
|
|
|
return (l >> s) & 0xf;
|
|
}
|
|
|
|
static int rk_edp_clock_recovery(const u8 *link_status, int lane_count)
|
|
{
|
|
int lane;
|
|
u8 lane_status;
|
|
|
|
for (lane = 0; lane < lane_count; lane++) {
|
|
lane_status = edp_get_lane_status(link_status, lane);
|
|
if ((lane_status & DP_LANE_CR_DONE) == 0)
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk_edp_channel_eq(const u8 *link_status, int lane_count)
|
|
{
|
|
u8 lane_align;
|
|
u8 lane_status;
|
|
int lane;
|
|
|
|
lane_align = edp_link_status(link_status,
|
|
DPCD_LANE_ALIGN_STATUS_UPDATED);
|
|
if (!(lane_align & DP_INTERLANE_ALIGN_DONE))
|
|
return -EIO;
|
|
for (lane = 0; lane < lane_count; lane++) {
|
|
lane_status = edp_get_lane_status(link_status, lane);
|
|
if ((lane_status & DP_CHANNEL_EQ_BITS) != DP_CHANNEL_EQ_BITS)
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint rk_edp_get_adjust_request_voltage(const u8 *link_status, int lane)
|
|
{
|
|
int i = DPCD_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
|
|
int s = ((lane & 1) ?
|
|
DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
|
|
DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
|
|
u8 l = edp_link_status(link_status, i);
|
|
|
|
return ((l >> s) & 0x3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
|
|
}
|
|
|
|
static uint rk_edp_get_adjust_request_pre_emphasis(const u8 *link_status,
|
|
int lane)
|
|
{
|
|
int i = DPCD_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
|
|
int s = ((lane & 1) ?
|
|
DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
|
|
DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
|
|
u8 l = edp_link_status(link_status, i);
|
|
|
|
return ((l >> s) & 0x3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
|
|
}
|
|
|
|
static void edp_get_adjust_train(const u8 *link_status, int lane_count,
|
|
u8 train_set[])
|
|
{
|
|
uint v = 0;
|
|
uint p = 0;
|
|
int lane;
|
|
|
|
for (lane = 0; lane < lane_count; lane++) {
|
|
uint this_v, this_p;
|
|
|
|
this_v = rk_edp_get_adjust_request_voltage(link_status, lane);
|
|
this_p = rk_edp_get_adjust_request_pre_emphasis(link_status,
|
|
lane);
|
|
|
|
debug("requested signal parameters: lane %d voltage %s pre_emph %s\n",
|
|
lane,
|
|
voltage_names[this_v >> DP_TRAIN_VOLTAGE_SWING_SHIFT],
|
|
pre_emph_names[this_p >> DP_TRAIN_PRE_EMPHASIS_SHIFT]);
|
|
|
|
if (this_v > v)
|
|
v = this_v;
|
|
if (this_p > p)
|
|
p = this_p;
|
|
}
|
|
|
|
if (v >= DP_VOLTAGE_MAX)
|
|
v |= DP_TRAIN_MAX_SWING_REACHED;
|
|
|
|
if (p >= DP_PRE_EMPHASIS_MAX)
|
|
p |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
|
|
|
|
debug("using signal parameters: voltage %s pre_emph %s\n",
|
|
voltage_names[(v & DP_TRAIN_VOLTAGE_SWING_MASK)
|
|
>> DP_TRAIN_VOLTAGE_SWING_SHIFT],
|
|
pre_emph_names[(p & DP_TRAIN_PRE_EMPHASIS_MASK)
|
|
>> DP_TRAIN_PRE_EMPHASIS_SHIFT]);
|
|
|
|
for (lane = 0; lane < 4; lane++)
|
|
train_set[lane] = v | p;
|
|
}
|
|
|
|
static int rk_edp_link_train_cr(struct rk_edp_priv *edp)
|
|
{
|
|
struct rk3288_edp *regs = edp->regs;
|
|
int clock_recovery;
|
|
uint voltage, tries = 0;
|
|
u8 status[DP_LINK_STATUS_SIZE];
|
|
int i, ret;
|
|
u8 value;
|
|
|
|
value = DP_TRAINING_PATTERN_1;
|
|
writel(value, ®s->dp_training_ptn_set);
|
|
ret = rk_edp_dpcd_write(regs, DPCD_TRAINING_PATTERN_SET, &value, 1);
|
|
if (ret)
|
|
return ret;
|
|
memset(edp->train_set, '\0', sizeof(edp->train_set));
|
|
|
|
/* clock recovery loop */
|
|
clock_recovery = 0;
|
|
tries = 0;
|
|
voltage = 0xff;
|
|
|
|
while (1) {
|
|
rk_edp_set_link_training(edp, edp->train_set);
|
|
ret = rk_edp_dpcd_write(regs, DPCD_TRAINING_LANE0_SET,
|
|
edp->train_set,
|
|
edp->link_train.lane_count);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mdelay(1);
|
|
|
|
ret = rk_edp_dpcd_read_link_status(edp, status);
|
|
if (ret) {
|
|
printf("displayport link status failed, ret=%d\n", ret);
|
|
break;
|
|
}
|
|
|
|
clock_recovery = rk_edp_clock_recovery(status,
|
|
edp->link_train.lane_count);
|
|
if (!clock_recovery)
|
|
break;
|
|
|
|
for (i = 0; i < edp->link_train.lane_count; i++) {
|
|
if ((edp->train_set[i] &
|
|
DP_TRAIN_MAX_SWING_REACHED) == 0)
|
|
break;
|
|
}
|
|
if (i == edp->link_train.lane_count) {
|
|
printf("clock recovery reached max voltage\n");
|
|
break;
|
|
}
|
|
|
|
if ((edp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) ==
|
|
voltage) {
|
|
if (++tries == MAX_CR_LOOP) {
|
|
printf("clock recovery tried 5 times\n");
|
|
break;
|
|
}
|
|
} else {
|
|
tries = 0;
|
|
}
|
|
|
|
voltage = edp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
|
|
|
|
/* Compute new train_set as requested by sink */
|
|
edp_get_adjust_train(status, edp->link_train.lane_count,
|
|
edp->train_set);
|
|
}
|
|
if (clock_recovery) {
|
|
printf("clock recovery failed: %d\n", clock_recovery);
|
|
return clock_recovery;
|
|
} else {
|
|
debug("clock recovery at voltage %d pre-emphasis %d\n",
|
|
edp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK,
|
|
(edp->train_set[0] & DP_TRAIN_PRE_EMPHASIS_MASK) >>
|
|
DP_TRAIN_PRE_EMPHASIS_SHIFT);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int rk_edp_link_train_ce(struct rk_edp_priv *edp)
|
|
{
|
|
struct rk3288_edp *regs = edp->regs;
|
|
int channel_eq;
|
|
u8 value;
|
|
int tries;
|
|
u8 status[DP_LINK_STATUS_SIZE];
|
|
int ret;
|
|
|
|
value = DP_TRAINING_PATTERN_2;
|
|
writel(value, ®s->dp_training_ptn_set);
|
|
ret = rk_edp_dpcd_write(regs, DPCD_TRAINING_PATTERN_SET, &value, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* channel equalization loop */
|
|
channel_eq = 0;
|
|
for (tries = 0; tries < 5; tries++) {
|
|
rk_edp_set_link_training(edp, edp->train_set);
|
|
ret = rk_edp_dpcd_write(regs, DPCD_TRAINING_LANE0_SET,
|
|
edp->train_set,
|
|
edp->link_train.lane_count);
|
|
if (ret)
|
|
return ret;
|
|
|
|
udelay(400);
|
|
|
|
if (rk_edp_dpcd_read_link_status(edp, status) < 0) {
|
|
printf("displayport link status failed\n");
|
|
return -1;
|
|
}
|
|
|
|
channel_eq = rk_edp_channel_eq(status,
|
|
edp->link_train.lane_count);
|
|
if (!channel_eq)
|
|
break;
|
|
edp_get_adjust_train(status, edp->link_train.lane_count,
|
|
edp->train_set);
|
|
}
|
|
|
|
if (channel_eq) {
|
|
printf("channel eq failed, ret=%d\n", channel_eq);
|
|
return channel_eq;
|
|
}
|
|
|
|
debug("channel eq at voltage %d pre-emphasis %d\n",
|
|
edp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK,
|
|
(edp->train_set[0] & DP_TRAIN_PRE_EMPHASIS_MASK)
|
|
>> DP_TRAIN_PRE_EMPHASIS_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk_edp_init_training(struct rk_edp_priv *edp)
|
|
{
|
|
u8 values[3];
|
|
int ret;
|
|
|
|
ret = rk_edp_dpcd_read(edp->regs, DPCD_DPCD_REV, values,
|
|
sizeof(values));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
edp->link_train.revision = values[0];
|
|
edp->link_train.link_rate = values[1];
|
|
edp->link_train.lane_count = values[2] & DP_MAX_LANE_COUNT_MASK;
|
|
|
|
debug("max link rate:%d.%dGps max number of lanes:%d\n",
|
|
edp->link_train.link_rate * 27 / 100,
|
|
edp->link_train.link_rate * 27 % 100,
|
|
edp->link_train.lane_count);
|
|
|
|
if ((edp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
|
|
(edp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
|
|
debug("Rx Max Link Rate is abnormal :%x\n",
|
|
edp->link_train.link_rate);
|
|
return -EPERM;
|
|
}
|
|
|
|
if (edp->link_train.lane_count == 0) {
|
|
debug("Rx Max Lane count is abnormal :%x\n",
|
|
edp->link_train.lane_count);
|
|
return -EPERM;
|
|
}
|
|
|
|
ret = rk_edp_link_power_up(edp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return rk_edp_link_configure(edp);
|
|
}
|
|
|
|
static int rk_edp_hw_link_training(struct rk_edp_priv *edp)
|
|
{
|
|
ulong start;
|
|
u32 val;
|
|
int ret;
|
|
|
|
/* Set link rate and count as you want to establish */
|
|
writel(edp->link_train.link_rate, &edp->regs->link_bw_set);
|
|
writel(edp->link_train.lane_count, &edp->regs->lane_count_set);
|
|
|
|
ret = rk_edp_link_train_cr(edp);
|
|
if (ret)
|
|
return ret;
|
|
ret = rk_edp_link_train_ce(edp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
writel(HW_LT_EN, &edp->regs->dp_hw_link_training);
|
|
start = get_timer(0);
|
|
do {
|
|
val = readl(&edp->regs->dp_hw_link_training);
|
|
if (!(val & HW_LT_EN))
|
|
break;
|
|
} while (get_timer(start) < 10);
|
|
|
|
if (val & HW_LT_ERR_CODE_MASK) {
|
|
printf("edp hw link training error: %d\n",
|
|
val >> HW_LT_ERR_CODE_SHIFT);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk_edp_select_i2c_device(struct rk3288_edp *regs,
|
|
unsigned int device_addr,
|
|
unsigned int val_addr)
|
|
{
|
|
int ret;
|
|
|
|
/* Set EDID device address */
|
|
writel(device_addr, ®s->aux_addr_7_0);
|
|
writel(0x0, ®s->aux_addr_15_8);
|
|
writel(0x0, ®s->aux_addr_19_16);
|
|
|
|
/* Set offset from base address of EDID device */
|
|
writel(val_addr, ®s->buf_data[0]);
|
|
|
|
/*
|
|
* Set I2C transaction and write address
|
|
* If bit 3 is 1, DisplayPort transaction.
|
|
* If Bit 3 is 0, I2C transaction.
|
|
*/
|
|
writel(AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT |
|
|
AUX_TX_COMM_WRITE, ®s->aux_ch_ctl_1);
|
|
|
|
/* Start AUX transaction */
|
|
ret = rk_edp_start_aux_transaction(regs);
|
|
if (ret != 0) {
|
|
debug("select_i2c_device Aux Transaction fail!\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk_edp_i2c_read(struct rk3288_edp *regs, unsigned int device_addr,
|
|
unsigned int val_addr, unsigned int count, u8 edid[])
|
|
{
|
|
u32 val;
|
|
unsigned int i, j;
|
|
unsigned int cur_data_idx;
|
|
unsigned int defer = 0;
|
|
int ret = 0;
|
|
|
|
for (i = 0; i < count; i += 16) {
|
|
for (j = 0; j < 10; j++) { /* try 10 times */
|
|
/* Clear AUX CH data buffer */
|
|
writel(BUF_CLR, ®s->buf_data_ctl);
|
|
|
|
/* Set normal AUX CH command */
|
|
clrbits_le32(®s->aux_ch_ctl_2, ADDR_ONLY);
|
|
|
|
/*
|
|
* If Rx sends defer, Tx sends only reads
|
|
* request without sending addres
|
|
*/
|
|
if (!defer) {
|
|
ret = rk_edp_select_i2c_device(regs,
|
|
device_addr,
|
|
val_addr + i);
|
|
} else {
|
|
defer = 0;
|
|
}
|
|
|
|
/*
|
|
* Set I2C transaction and write data
|
|
* If bit 3 is 1, DisplayPort transaction.
|
|
* If Bit 3 is 0, I2C transaction.
|
|
*/
|
|
writel(AUX_LENGTH(16) | AUX_TX_COMM_I2C_TRANSACTION |
|
|
AUX_TX_COMM_READ, ®s->aux_ch_ctl_1);
|
|
|
|
/* Start AUX transaction */
|
|
ret = rk_edp_start_aux_transaction(regs);
|
|
if (ret == 0) {
|
|
break;
|
|
} else {
|
|
debug("Aux Transaction fail!\n");
|
|
continue;
|
|
}
|
|
|
|
/* Check if Rx sends defer */
|
|
val = readl(®s->aux_rx_comm);
|
|
if (val == AUX_RX_COMM_AUX_DEFER ||
|
|
val == AUX_RX_COMM_I2C_DEFER) {
|
|
debug("Defer: %d\n\n", val);
|
|
defer = 1;
|
|
}
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) {
|
|
val = readl(®s->buf_data[cur_data_idx]);
|
|
edid[i + cur_data_idx] = (u8)val;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk_edp_set_link_train(struct rk_edp_priv *edp)
|
|
{
|
|
int ret;
|
|
|
|
ret = rk_edp_init_training(edp);
|
|
if (ret) {
|
|
printf("DP LT init failed!\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = rk_edp_hw_link_training(edp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rk_edp_init_video(struct rk3288_edp *regs)
|
|
{
|
|
writel(VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG,
|
|
®s->common_int_sta_1);
|
|
writel(CHA_CRI(4) | CHA_CTRL, ®s->sys_ctl_2);
|
|
writel(VID_HRES_TH(2) | VID_VRES_TH(0), ®s->video_ctl_8);
|
|
}
|
|
|
|
static void rk_edp_config_video_slave_mode(struct rk3288_edp *regs)
|
|
{
|
|
clrbits_le32(®s->func_en_1, VID_FIFO_FUNC_EN_N | VID_CAP_FUNC_EN_N);
|
|
}
|
|
|
|
static void rk_edp_set_video_cr_mn(struct rk3288_edp *regs,
|
|
enum clock_recovery_m_value_type type,
|
|
u32 m_value,
|
|
u32 n_value)
|
|
{
|
|
if (type == REGISTER_M) {
|
|
setbits_le32(®s->sys_ctl_4, FIX_M_VID);
|
|
writel(m_value & 0xff, ®s->m_vid_0);
|
|
writel((m_value >> 8) & 0xff, ®s->m_vid_1);
|
|
writel((m_value >> 16) & 0xff, ®s->m_vid_2);
|
|
|
|
writel(n_value & 0xf, ®s->n_vid_0);
|
|
writel((n_value >> 8) & 0xff, ®s->n_vid_1);
|
|
writel((n_value >> 16) & 0xff, ®s->n_vid_2);
|
|
} else {
|
|
clrbits_le32(®s->sys_ctl_4, FIX_M_VID);
|
|
|
|
writel(0x00, ®s->n_vid_0);
|
|
writel(0x80, ®s->n_vid_1);
|
|
writel(0x00, ®s->n_vid_2);
|
|
}
|
|
}
|
|
|
|
static int rk_edp_is_video_stream_clock_on(struct rk3288_edp *regs)
|
|
{
|
|
ulong start;
|
|
u32 val;
|
|
|
|
start = get_timer(0);
|
|
do {
|
|
val = readl(®s->sys_ctl_1);
|
|
|
|
/* must write value to update DET_STA bit status */
|
|
writel(val, ®s->sys_ctl_1);
|
|
val = readl(®s->sys_ctl_1);
|
|
if (!(val & DET_STA))
|
|
continue;
|
|
|
|
val = readl(®s->sys_ctl_2);
|
|
|
|
/* must write value to update CHA_STA bit status */
|
|
writel(val, ®s->sys_ctl_2);
|
|
val = readl(®s->sys_ctl_2);
|
|
if (!(val & CHA_STA))
|
|
return 0;
|
|
|
|
} while (get_timer(start) < 100);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int rk_edp_is_video_stream_on(struct rk_edp_priv *edp)
|
|
{
|
|
ulong start;
|
|
u32 val;
|
|
|
|
start = get_timer(0);
|
|
do {
|
|
val = readl(&edp->regs->sys_ctl_3);
|
|
|
|
/* must write value to update STRM_VALID bit status */
|
|
writel(val, &edp->regs->sys_ctl_3);
|
|
|
|
val = readl(&edp->regs->sys_ctl_3);
|
|
if (!(val & STRM_VALID))
|
|
return 0;
|
|
} while (get_timer(start) < 100);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int rk_edp_config_video(struct rk_edp_priv *edp)
|
|
{
|
|
int ret;
|
|
|
|
rk_edp_config_video_slave_mode(edp->regs);
|
|
|
|
if (!rk_edp_get_pll_locked(edp->regs)) {
|
|
debug("PLL is not locked yet.\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
ret = rk_edp_is_video_stream_clock_on(edp->regs);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Set to use the register calculated M/N video */
|
|
rk_edp_set_video_cr_mn(edp->regs, CALCULATED_M, 0, 0);
|
|
|
|
/* For video bist, Video timing must be generated by register */
|
|
clrbits_le32(&edp->regs->video_ctl_10, F_SEL);
|
|
|
|
/* Disable video mute */
|
|
clrbits_le32(&edp->regs->video_ctl_1, VIDEO_MUTE);
|
|
|
|
/* Enable video at next frame */
|
|
setbits_le32(&edp->regs->video_ctl_1, VIDEO_EN);
|
|
|
|
return rk_edp_is_video_stream_on(edp);
|
|
}
|
|
|
|
static void rockchip_edp_force_hpd(struct rk_edp_priv *edp)
|
|
{
|
|
setbits_le32(&edp->regs->sys_ctl_3, F_HPD | HPD_CTRL);
|
|
}
|
|
|
|
static int rockchip_edp_get_plug_in_status(struct rk_edp_priv *edp)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(&edp->regs->sys_ctl_3);
|
|
if (val & HPD_STATUS)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* support edp HPD function
|
|
* some hardware version do not support edp hdp,
|
|
* we use 200ms to try to get the hpd single now,
|
|
* if we can not get edp hpd single, it will delay 200ms,
|
|
* also meet the edp power timing request, to compatible
|
|
* all of the hardware version
|
|
*/
|
|
static void rockchip_edp_wait_hpd(struct rk_edp_priv *edp)
|
|
{
|
|
ulong start;
|
|
|
|
start = get_timer(0);
|
|
do {
|
|
if (rockchip_edp_get_plug_in_status(edp))
|
|
return;
|
|
udelay(100);
|
|
} while (get_timer(start) < 200);
|
|
|
|
debug("do not get hpd single, force hpd\n");
|
|
rockchip_edp_force_hpd(edp);
|
|
}
|
|
|
|
static int rk_edp_enable(struct udevice *dev, int panel_bpp,
|
|
const struct display_timing *edid)
|
|
{
|
|
struct rk_edp_priv *priv = dev_get_priv(dev);
|
|
int ret = 0;
|
|
|
|
ret = rk_edp_set_link_train(priv);
|
|
if (ret) {
|
|
printf("link train failed!\n");
|
|
return ret;
|
|
}
|
|
|
|
rk_edp_init_video(priv->regs);
|
|
ret = rk_edp_config_video(priv);
|
|
if (ret) {
|
|
printf("config video failed\n");
|
|
return ret;
|
|
}
|
|
ret = panel_enable_backlight(priv->panel);
|
|
if (ret) {
|
|
debug("%s: backlight error: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk_edp_read_edid(struct udevice *dev, u8 *buf, int buf_size)
|
|
{
|
|
struct rk_edp_priv *priv = dev_get_priv(dev);
|
|
u32 edid_size = EDID_LENGTH;
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
ret = rk_edp_i2c_read(priv->regs, EDID_ADDR, EDID_HEADER,
|
|
EDID_LENGTH, &buf[EDID_HEADER]);
|
|
if (ret) {
|
|
debug("EDID read failed\n");
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* check if the EDID has an extension flag, and read additional
|
|
* EDID data if needed
|
|
*/
|
|
if (buf[EDID_EXTENSION_FLAG]) {
|
|
edid_size += EDID_LENGTH;
|
|
ret = rk_edp_i2c_read(priv->regs, EDID_ADDR,
|
|
EDID_LENGTH, EDID_LENGTH,
|
|
&buf[EDID_LENGTH]);
|
|
if (ret) {
|
|
debug("EDID Read failed!\n");
|
|
continue;
|
|
}
|
|
}
|
|
goto done;
|
|
}
|
|
|
|
/* After 3 attempts, give up */
|
|
return ret;
|
|
|
|
done:
|
|
return edid_size;
|
|
}
|
|
|
|
static int rk_edp_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct rk_edp_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->regs = dev_read_addr_ptr(dev);
|
|
priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk_edp_remove(struct udevice *dev)
|
|
{
|
|
struct rk_edp_priv *priv = dev_get_priv(dev);
|
|
struct rk3288_edp *regs = priv->regs;
|
|
|
|
setbits_le32(®s->video_ctl_1, VIDEO_MUTE);
|
|
clrbits_le32(®s->video_ctl_1, VIDEO_EN);
|
|
clrbits_le32(®s->sys_ctl_3, F_HPD | HPD_CTRL);
|
|
setbits_le32(®s->func_en_1, SW_FUNC_EN_N);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk_edp_probe(struct udevice *dev)
|
|
{
|
|
struct display_plat *uc_plat = dev_get_uclass_plat(dev);
|
|
struct rk_edp_priv *priv = dev_get_priv(dev);
|
|
struct rk3288_edp *regs = priv->regs;
|
|
struct rockchip_dp_data *edp_data = (struct rockchip_dp_data *)dev_get_driver_data(dev);
|
|
struct reset_ctl dp_rst;
|
|
|
|
struct clk clk;
|
|
int ret;
|
|
|
|
ret = uclass_get_device_by_phandle(UCLASS_PANEL, dev, "rockchip,panel",
|
|
&priv->panel);
|
|
if (ret) {
|
|
debug("%s: Cannot find panel for '%s' (ret=%d)\n", __func__,
|
|
dev->name, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_get_by_name(dev, "dp", &dp_rst);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get dp reset (ret=%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_assert(&dp_rst);
|
|
if (ret) {
|
|
dev_err(dev, "failed to assert dp reset (ret=%d)\n", ret);
|
|
return ret;
|
|
}
|
|
udelay(20);
|
|
|
|
ret = reset_deassert(&dp_rst);
|
|
if (ret) {
|
|
dev_err(dev, "failed to deassert dp reset (ret=%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
int vop_id = uc_plat->source_id;
|
|
debug("%s, uc_plat=%p, vop_id=%u\n", __func__, uc_plat, vop_id);
|
|
|
|
if (edp_data->chip_type == RK3288_DP) {
|
|
ret = clk_get_by_index(dev, 1, &clk);
|
|
if (ret >= 0) {
|
|
ret = clk_set_rate(&clk, 0);
|
|
clk_free(&clk);
|
|
}
|
|
if (ret) {
|
|
debug("%s: Failed to set EDP clock: ret=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
ret = clk_get_by_index(uc_plat->src_dev, 0, &clk);
|
|
if (ret >= 0) {
|
|
ret = clk_set_rate(&clk, 192000000);
|
|
clk_free(&clk);
|
|
}
|
|
if (ret < 0) {
|
|
debug("%s: Failed to set clock in source device '%s': ret=%d\n",
|
|
__func__, uc_plat->src_dev->name, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* grf_edp_ref_clk_sel: from internal 24MHz or 27MHz clock */
|
|
rk_setreg(priv->grf + edp_data->reg_ref_clk_sel,
|
|
edp_data->ref_clk_sel_bit);
|
|
|
|
/* select epd signal from vop0 or vop1 */
|
|
rk_clrsetreg(priv->grf + edp_data->reg_vop_big_little,
|
|
edp_data->reg_vop_big_little_sel,
|
|
(vop_id == 1) ? edp_data->reg_vop_big_little_sel : 0);
|
|
|
|
rockchip_edp_wait_hpd(priv);
|
|
|
|
rk_edp_init_refclk(regs, edp_data->chip_type);
|
|
rk_edp_init_interrupt(regs);
|
|
rk_edp_enable_sw_function(regs);
|
|
ret = rk_edp_init_analog_func(regs);
|
|
if (ret)
|
|
return ret;
|
|
rk_edp_init_aux(regs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_display_ops dp_rockchip_ops = {
|
|
.read_edid = rk_edp_read_edid,
|
|
.enable = rk_edp_enable,
|
|
};
|
|
|
|
static const struct rockchip_dp_data rk3399_edp = {
|
|
.reg_vop_big_little = RK3399_GRF_SOC_CON20,
|
|
.reg_vop_big_little_sel = BIT(5),
|
|
.reg_ref_clk_sel = RK3399_GRF_SOC_CON25,
|
|
.ref_clk_sel_bit = BIT(11),
|
|
.chip_type = RK3399_EDP,
|
|
};
|
|
|
|
static const struct rockchip_dp_data rk3288_dp = {
|
|
.reg_vop_big_little = RK3288_GRF_SOC_CON6,
|
|
.reg_vop_big_little_sel = BIT(5),
|
|
.reg_ref_clk_sel = RK3288_GRF_SOC_CON12,
|
|
.ref_clk_sel_bit = BIT(4),
|
|
.chip_type = RK3288_DP,
|
|
};
|
|
|
|
static const struct udevice_id rockchip_dp_ids[] = {
|
|
{ .compatible = "rockchip,rk3288-edp", .data = (ulong)&rk3288_dp },
|
|
{ .compatible = "rockchip,rk3399-edp", .data = (ulong)&rk3399_edp },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(dp_rockchip) = {
|
|
.name = "edp_rockchip",
|
|
.id = UCLASS_DISPLAY,
|
|
.of_match = rockchip_dp_ids,
|
|
.ops = &dp_rockchip_ops,
|
|
.of_to_plat = rk_edp_of_to_plat,
|
|
.probe = rk_edp_probe,
|
|
.remove = rk_edp_remove,
|
|
.priv_auto = sizeof(struct rk_edp_priv),
|
|
};
|