mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-24 04:34:22 +08:00
229 lines
6.7 KiB
C
229 lines
6.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2010 Freescale Semiconductor, Inc.
|
|
* Copyright 2020 NXP
|
|
*
|
|
* Author: Priyanka Jain <Priyanka.Jain@freescale.com>
|
|
*/
|
|
|
|
/*
|
|
* This file provides Date & Time support (no alarms) for PT7C4338 chip.
|
|
*
|
|
* This file is based on drivers/rtc/ds1337.c
|
|
*
|
|
* PT7C4338 chip is manufactured by Pericom Technology Inc.
|
|
* It is a serial real-time clock which provides
|
|
* 1)Low-power clock/calendar.
|
|
* 2)Programmable square-wave output.
|
|
* It has 56 bytes of nonvolatile RAM.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <rtc.h>
|
|
#include <i2c.h>
|
|
|
|
/* RTC register addresses */
|
|
#define RTC_SEC_REG_ADDR 0x0
|
|
#define RTC_MIN_REG_ADDR 0x1
|
|
#define RTC_HR_REG_ADDR 0x2
|
|
#define RTC_DAY_REG_ADDR 0x3
|
|
#define RTC_DATE_REG_ADDR 0x4
|
|
#define RTC_MON_REG_ADDR 0x5
|
|
#define RTC_YR_REG_ADDR 0x6
|
|
#define RTC_CTL_STAT_REG_ADDR 0x7
|
|
|
|
/* RTC second register address bit */
|
|
#define RTC_SEC_BIT_CH 0x80 /* Clock Halt (in Register 0) */
|
|
|
|
/* RTC control and status register bits */
|
|
#define RTC_CTL_STAT_BIT_RS0 0x1 /* Rate select 0 */
|
|
#define RTC_CTL_STAT_BIT_RS1 0x2 /* Rate select 1 */
|
|
#define RTC_CTL_STAT_BIT_SQWE 0x10 /* Square Wave Enable */
|
|
#define RTC_CTL_STAT_BIT_OSF 0x20 /* Oscillator Stop Flag */
|
|
#define RTC_CTL_STAT_BIT_OUT 0x80 /* Output Level Control */
|
|
|
|
/* RTC reset value */
|
|
#define RTC_PT7C4338_RESET_VAL \
|
|
(RTC_CTL_STAT_BIT_RS0 | RTC_CTL_STAT_BIT_RS1 | RTC_CTL_STAT_BIT_OUT)
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_RTC)
|
|
/****** Helper functions ****************************************/
|
|
static u8 rtc_read(u8 reg)
|
|
{
|
|
return i2c_reg_read(CONFIG_SYS_I2C_RTC_ADDR, reg);
|
|
}
|
|
|
|
static void rtc_write(u8 reg, u8 val)
|
|
{
|
|
i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, reg, val);
|
|
}
|
|
/****************************************************************/
|
|
|
|
/* Get the current time from the RTC */
|
|
int rtc_get(struct rtc_time *tmp)
|
|
{
|
|
int ret = 0;
|
|
u8 sec, min, hour, mday, wday, mon, year, ctl_stat;
|
|
|
|
ctl_stat = rtc_read(RTC_CTL_STAT_REG_ADDR);
|
|
sec = rtc_read(RTC_SEC_REG_ADDR);
|
|
min = rtc_read(RTC_MIN_REG_ADDR);
|
|
hour = rtc_read(RTC_HR_REG_ADDR);
|
|
wday = rtc_read(RTC_DAY_REG_ADDR);
|
|
mday = rtc_read(RTC_DATE_REG_ADDR);
|
|
mon = rtc_read(RTC_MON_REG_ADDR);
|
|
year = rtc_read(RTC_YR_REG_ADDR);
|
|
debug("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
|
|
"hr: %02x min: %02x sec: %02x control_status: %02x\n",
|
|
year, mon, mday, wday, hour, min, sec, ctl_stat);
|
|
|
|
if (ctl_stat & RTC_CTL_STAT_BIT_OSF) {
|
|
printf("### Warning: RTC oscillator has stopped\n");
|
|
/* clear the OSF flag */
|
|
rtc_write(RTC_CTL_STAT_REG_ADDR,
|
|
rtc_read(RTC_CTL_STAT_REG_ADDR)\
|
|
& ~RTC_CTL_STAT_BIT_OSF);
|
|
ret = -1;
|
|
}
|
|
|
|
tmp->tm_sec = bcd2bin(sec & 0x7F);
|
|
tmp->tm_min = bcd2bin(min & 0x7F);
|
|
tmp->tm_hour = bcd2bin(hour & 0x3F);
|
|
tmp->tm_mday = bcd2bin(mday & 0x3F);
|
|
tmp->tm_mon = bcd2bin(mon & 0x1F);
|
|
tmp->tm_year = bcd2bin(year) + 2000;
|
|
tmp->tm_wday = bcd2bin((wday - 1) & 0x07);
|
|
tmp->tm_yday = 0;
|
|
tmp->tm_isdst = 0;
|
|
debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Set the RTC */
|
|
int rtc_set(struct rtc_time *tmp)
|
|
{
|
|
debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
rtc_write(RTC_YR_REG_ADDR, bin2bcd(tmp->tm_year % 100));
|
|
rtc_write(RTC_MON_REG_ADDR, bin2bcd(tmp->tm_mon));
|
|
rtc_write(RTC_DAY_REG_ADDR, bin2bcd(tmp->tm_wday + 1));
|
|
rtc_write(RTC_DATE_REG_ADDR, bin2bcd(tmp->tm_mday));
|
|
rtc_write(RTC_HR_REG_ADDR, bin2bcd(tmp->tm_hour));
|
|
rtc_write(RTC_MIN_REG_ADDR, bin2bcd(tmp->tm_min));
|
|
rtc_write(RTC_SEC_REG_ADDR, bin2bcd(tmp->tm_sec));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Reset the RTC */
|
|
void rtc_reset(void)
|
|
{
|
|
rtc_write(RTC_SEC_REG_ADDR, 0x00); /* clearing Clock Halt */
|
|
rtc_write(RTC_CTL_STAT_REG_ADDR, RTC_PT7C4338_RESET_VAL);
|
|
}
|
|
#else
|
|
static u8 rtc_read(struct udevice *dev, u8 reg)
|
|
{
|
|
return dm_i2c_reg_read(dev, reg);
|
|
}
|
|
|
|
static void rtc_write(struct udevice *dev, u8 reg, u8 val)
|
|
{
|
|
dm_i2c_reg_write(dev, reg, val);
|
|
}
|
|
|
|
static int pt7c4338_rtc_get(struct udevice *dev, struct rtc_time *tmp)
|
|
{
|
|
int ret = 0;
|
|
u8 sec, min, hour, mday, wday, mon, year, ctl_stat;
|
|
|
|
ctl_stat = rtc_read(dev, RTC_CTL_STAT_REG_ADDR);
|
|
sec = rtc_read(dev, RTC_SEC_REG_ADDR);
|
|
min = rtc_read(dev, RTC_MIN_REG_ADDR);
|
|
hour = rtc_read(dev, RTC_HR_REG_ADDR);
|
|
wday = rtc_read(dev, RTC_DAY_REG_ADDR);
|
|
mday = rtc_read(dev, RTC_DATE_REG_ADDR);
|
|
mon = rtc_read(dev, RTC_MON_REG_ADDR);
|
|
year = rtc_read(dev, RTC_YR_REG_ADDR);
|
|
debug("Get RTC year: %02x mon: %02x mday: %02x wday: %02x\n",
|
|
year, mon, mday, wday);
|
|
debug("hr: %02x min: %02x sec: %02x control_status: %02x\n",
|
|
hour, min, sec, ctl_stat);
|
|
|
|
if (ctl_stat & RTC_CTL_STAT_BIT_OSF) {
|
|
printf("### Warning: RTC oscillator has stopped\n");
|
|
/* clear the OSF flag */
|
|
rtc_write(dev, RTC_CTL_STAT_REG_ADDR,
|
|
rtc_read(dev,
|
|
RTC_CTL_STAT_REG_ADDR)
|
|
& ~RTC_CTL_STAT_BIT_OSF);
|
|
ret = -1;
|
|
}
|
|
|
|
tmp->tm_sec = bcd2bin(sec & 0x7F);
|
|
tmp->tm_min = bcd2bin(min & 0x7F);
|
|
tmp->tm_hour = bcd2bin(hour & 0x3F);
|
|
tmp->tm_mday = bcd2bin(mday & 0x3F);
|
|
tmp->tm_mon = bcd2bin(mon & 0x1F);
|
|
tmp->tm_year = bcd2bin(year) + 2000;
|
|
tmp->tm_wday = bcd2bin((wday - 1) & 0x07);
|
|
tmp->tm_yday = 0;
|
|
tmp->tm_isdst = 0;
|
|
debug("Get DATE: %4d-%02d-%02d [wday=%d] TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pt7c4338_rtc_set(struct udevice *dev, const struct rtc_time *tmp)
|
|
{
|
|
debug("Set DATE: %4d-%02d-%02d [wday=%d] TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
rtc_write(dev, RTC_YR_REG_ADDR, bin2bcd(tmp->tm_year % 100));
|
|
rtc_write(dev, RTC_MON_REG_ADDR, bin2bcd(tmp->tm_mon));
|
|
rtc_write(dev, RTC_DAY_REG_ADDR, bin2bcd(tmp->tm_wday + 1));
|
|
rtc_write(dev, RTC_DATE_REG_ADDR, bin2bcd(tmp->tm_mday));
|
|
rtc_write(dev, RTC_HR_REG_ADDR, bin2bcd(tmp->tm_hour));
|
|
rtc_write(dev, RTC_MIN_REG_ADDR, bin2bcd(tmp->tm_min));
|
|
rtc_write(dev, RTC_SEC_REG_ADDR, bin2bcd(tmp->tm_sec));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pt7c4338_rtc_reset(struct udevice *dev)
|
|
{
|
|
rtc_write(dev, RTC_SEC_REG_ADDR, 0x00); /* clearing Clock Halt */
|
|
rtc_write(dev, RTC_CTL_STAT_REG_ADDR, RTC_PT7C4338_RESET_VAL);
|
|
return 0;
|
|
}
|
|
|
|
static const struct rtc_ops pt7c4338_rtc_ops = {
|
|
.get = pt7c4338_rtc_get,
|
|
.set = pt7c4338_rtc_set,
|
|
.reset = pt7c4338_rtc_reset,
|
|
};
|
|
|
|
static const struct udevice_id pt7c4338_rtc_ids[] = {
|
|
{ .compatible = "pericom,pt7c4338" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rtc_pt7c4338) = {
|
|
.name = "rtc-pt7c4338",
|
|
.id = UCLASS_RTC,
|
|
.of_match = pt7c4338_rtc_ids,
|
|
.ops = &pt7c4338_rtc_ops,
|
|
};
|
|
#endif
|