u-boot/configs/snow_defconfig
Anatolij Gustschin 2cc393f32f video: make BPP and ANSI configs optional
Many boards do not use all selected framebuffer depth
configurations, for such boards there is some unused
code in video and console uclass routines. Make depth
specific code optional to avoid dead code and slightly
reduce binary size. Also make ANSI code optional for
the same reason. When i.e. using only VIDEO_BPP16 the
code size shrinks (below values when using gcc-7.3.0):

  $ ./tools/buildman/buildman -b video-wip -sS wandboard
  ...
  01: Merge git://git.denx.de/u-boot-sh
  02: video: add guards around 16bpp/32bbp code
  03: video: make BPP and ANSI configs optional
         arm: (for 1/1 boards) all -776.0 bss -8.0 text -768.0

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
Tested-by: Patrice Chotard <patrice.chotard@st.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2019-12-06 16:38:51 +01:00

97 lines
2.2 KiB
Plaintext

CONFIG_ARM=y
CONFIG_ARCH_CPU_INIT=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_EXYNOS=y
CONFIG_SYS_TEXT_BASE=0x43E00000
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_SNOW=y
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0x3FC000
CONFIG_NR_DRAM_BANKS=8
CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0x12c30000
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_ENV_SECT_SIZE=0x4000
CONFIG_IDENT_STRING=" for snow"
CONFIG_DEBUG_UART=y
CONFIG_SPL_TEXT_BASE=0x02023400
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SILENT_CONSOLE=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SYS_PROMPT="snow # "
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_SOUND=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_TPM=y
CONFIG_CMD_TPM_TEST=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_DEFAULT_DEVICE_TREE="exynos5250-snow"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_BUS=y
CONFIG_ENV_SPI_BUS=1
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_I2C_CROS_EC_LDO=y
CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_CROS_EC_KEYB=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_DW=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_S5P=y
CONFIG_MTD=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=50000000
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x5000000
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_MAX77686=y
CONFIG_PMIC_S5M8767=y
CONFIG_PMIC_TPS65090=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_MAX77686=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_DM_PWM=y
CONFIG_PWM_EXYNOS=y
CONFIG_DEBUG_UART_S5P=y
CONFIG_SOUND=y
CONFIG_I2S=y
CONFIG_I2S_SAMSUNG=y
CONFIG_SOUND_MAX98095=y
CONFIG_SOUND_WM8994=y
CONFIG_EXYNOS_SPI=y
CONFIG_TPM_TIS_INFINEON=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX88179=y
CONFIG_DM_VIDEO=y
CONFIG_VIDEO_BPP16=y
CONFIG_VIDEO_BPP32=y
CONFIG_VIDCONSOLE_AS_LCD=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_BRIDGE=y
CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y
CONFIG_VIDEO_BRIDGE_NXP_PTN3460=y
CONFIG_LCD=y
CONFIG_TPM=y
CONFIG_ERRNO_STR=y