mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-12-17 00:33:27 +08:00
Code Issues Packages Projects Releases Wiki Activity
8a1cdaa9d5
u-boot/include/net.h
Dirk Behme 6a45e38495 Make getenv_IPaddr() global 
There are boards out there that do not have network support in
U-Boot (CONFIG_CMD_NET not set), but they do so in Linux. This
makes it desirable to be able to port network configuration (like
the IP address) to the Linux kernel.

We should not make the passing of the IP configuration to Linux
dependent on U-Boot features / settings.

For this, make getenv_IPaddr() global. This fixes build error

u-boot/lib_xxx/board.c:360: undefined reference to `getenv_IPaddr'

on various architectures.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
2010-01-17 20:14:47 +01:00

523 lines
15 KiB
C
Raw Blame History

/*
* LiMon Monitor (LiMon) - Network.
*
* Copyright 1994 - 2000 Neil Russell.
* (See License)
*
*
* History
* 9/16/00 bor adapted to TQM823L/STK8xxL board, RARP/TFTP boot added
*/
#ifndef __NET_H__
#define __NET_H__
#if defined(CONFIG_8xx)
#include <commproc.h>
# if !defined(CONFIG_NET_MULTI)
# if defined(FEC_ENET) || defined(SCC_ENET)
# define CONFIG_NET_MULTI
# endif
# endif
#endif /* CONFIG_8xx */
#if defined(CONFIG_MPC5xxx)
# if !defined(CONFIG_NET_MULTI)
# if defined(CONFIG_MPC5xxx_FEC)
# define CONFIG_NET_MULTI
# endif
# endif
#endif /* CONFIG_MPC5xxx */
#if !defined(CONFIG_NET_MULTI) && defined(CONFIG_CPM2)
#include <config.h>
#if defined(CONFIG_ETHER_ON_FCC)
#if defined(CONFIG_ETHER_ON_SCC)
#error "Ethernet not correctly defined"
#endif /* CONFIG_ETHER_ON_SCC */
#define CONFIG_NET_MULTI
#if (CONFIG_ETHER_INDEX == 1)
#define CONFIG_ETHER_ON_FCC1
# define CONFIG_SYS_CMXFCR_MASK1 CONFIG_SYS_CMXFCR_MASK
# define CONFIG_SYS_CMXFCR_VALUE1 CONFIG_SYS_CMXFCR_VALUE
#elif (CONFIG_ETHER_INDEX == 2)
#define CONFIG_ETHER_ON_FCC2
# define CONFIG_SYS_CMXFCR_MASK2 CONFIG_SYS_CMXFCR_MASK
# define CONFIG_SYS_CMXFCR_VALUE2 CONFIG_SYS_CMXFCR_VALUE
#elif (CONFIG_ETHER_INDEX == 3)
#define CONFIG_ETHER_ON_FCC3
# define CONFIG_SYS_CMXFCR_MASK3 CONFIG_SYS_CMXFCR_MASK
# define CONFIG_SYS_CMXFCR_VALUE3 CONFIG_SYS_CMXFCR_VALUE
#endif /* CONFIG_ETHER_INDEX */
#endif /* CONFIG_ETHER_ON_FCC */
#endif /* !CONFIG_NET_MULTI && CONFIG_8260 */
#include <asm/byteorder.h> /* for nton* / ntoh* stuff */
/*
* The number of receive packet buffers, and the required packet buffer
* alignment in memory.
*
*/
#ifdef CONFIG_SYS_RX_ETH_BUFFER
# define PKTBUFSRX CONFIG_SYS_RX_ETH_BUFFER
#else
# define PKTBUFSRX 4
#endif
#define PKTALIGN 32
typedef ulong IPaddr_t;
/*
* The current receive packet handler. Called with a pointer to the
* application packet, and a protocol type (PORT_BOOTPC or PORT_TFTP).
* All other packets are dealt with without calling the handler.
*/
typedef void rxhand_f(uchar *, unsigned, unsigned, unsigned);
/*
* A timeout handler. Called after time interval has expired.
*/
typedef void thand_f(void);
#define NAMESIZE 16
enum eth_state_t {
ETH_STATE_INIT,
ETH_STATE_PASSIVE,
ETH_STATE_ACTIVE
};
struct eth_device {
char name[NAMESIZE];
unsigned char enetaddr[6];
int iobase;
int state;
int (*init) (struct eth_device*, bd_t*);
int (*send) (struct eth_device*, volatile void* packet, int length);
int (*recv) (struct eth_device*);
void (*halt) (struct eth_device*);
#ifdef CONFIG_MCAST_TFTP
int (*mcast) (struct eth_device*, u32 ip, u8 set);
#endif
struct eth_device *next;
void *priv;
};
extern int eth_initialize(bd_t *bis); /* Initialize network subsystem */
extern int eth_register(struct eth_device* dev);/* Register network device */
extern void eth_try_another(int first_restart); /* Change the device */
#ifdef CONFIG_NET_MULTI
extern void eth_set_current(void); /* set nterface to ethcur var */
#endif
extern struct eth_device *eth_get_dev(void); /* get the current device MAC */
extern struct eth_device *eth_get_dev_by_name(char *devname); /* get device */
extern struct eth_device *eth_get_dev_by_index(int index); /* get dev @ index */
extern int eth_get_dev_index (void); /* get the device index */
extern void eth_parse_enetaddr(const char *addr, uchar *enetaddr);
extern int eth_getenv_enetaddr(char *name, uchar *enetaddr);
extern int eth_setenv_enetaddr(char *name, const uchar *enetaddr);
extern int eth_getenv_enetaddr_by_index(int index, uchar *enetaddr);
extern int eth_init(bd_t *bis); /* Initialize the device */
extern int eth_send(volatile void *packet, int length); /* Send a packet */
#ifdef CONFIG_API
extern int eth_receive(volatile void *packet, int length); /* Receive a packet*/
#endif
extern int eth_rx(void); /* Check for received packets */
extern void eth_halt(void); /* stop SCC */
extern char *eth_get_name(void); /* get name of current device */
#ifdef CONFIG_MCAST_TFTP
int eth_mcast_join( IPaddr_t mcast_addr, u8 join);
u32 ether_crc (size_t len, unsigned char const *p);
#endif
/**********************************************************************/
/*
* Protocol headers.
*/
/*
* Ethernet header
*/
typedef struct {
uchar et_dest[6]; /* Destination node */
uchar et_src[6]; /* Source node */
ushort et_protlen; /* Protocol or length */
uchar et_dsap; /* 802 DSAP */
uchar et_ssap; /* 802 SSAP */
uchar et_ctl; /* 802 control */
uchar et_snap1; /* SNAP */
uchar et_snap2;
uchar et_snap3;
ushort et_prot; /* 802 protocol */
} Ethernet_t;
#define ETHER_HDR_SIZE 14 /* Ethernet header size */
#define E802_HDR_SIZE 22 /* 802 ethernet header size */
/*
* Ethernet header
*/
typedef struct {
uchar vet_dest[6]; /* Destination node */
uchar vet_src[6]; /* Source node */
ushort vet_vlan_type; /* PROT_VLAN */
ushort vet_tag; /* TAG of VLAN */
ushort vet_type; /* protocol type */
} VLAN_Ethernet_t;
#define VLAN_ETHER_HDR_SIZE 18 /* VLAN Ethernet header size */
#define PROT_IP 0x0800 /* IP protocol */
#define PROT_ARP 0x0806 /* IP ARP protocol */
#define PROT_RARP 0x8035 /* IP ARP protocol */
#define PROT_VLAN 0x8100 /* IEEE 802.1q protocol */
#define IPPROTO_ICMP 1 /* Internet Control Message Protocol */
#define IPPROTO_UDP 17 /* User Datagram Protocol */
/*
* Internet Protocol (IP) header.
*/
typedef struct {
uchar ip_hl_v; /* header length and version */
uchar ip_tos; /* type of service */
ushort ip_len; /* total length */
ushort ip_id; /* identification */
ushort ip_off; /* fragment offset field */
uchar ip_ttl; /* time to live */
uchar ip_p; /* protocol */
ushort ip_sum; /* checksum */
IPaddr_t ip_src; /* Source IP address */
IPaddr_t ip_dst; /* Destination IP address */
ushort udp_src; /* UDP source port */
ushort udp_dst; /* UDP destination port */
ushort udp_len; /* Length of UDP packet */
ushort udp_xsum; /* Checksum */
} IP_t;
#define IP_OFFS 0x1fff /* ip offset *= 8 */
#define IP_FLAGS 0xe000 /* first 3 bits */
#define IP_FLAGS_RES 0x8000 /* reserved */
#define IP_FLAGS_DFRAG 0x4000 /* don't fragments */
#define IP_FLAGS_MFRAG 0x2000 /* more fragments */
#define IP_HDR_SIZE_NO_UDP (sizeof (IP_t) - 8)
#define IP_HDR_SIZE (sizeof (IP_t))
/*
* Address Resolution Protocol (ARP) header.
*/
typedef struct
{
ushort ar_hrd; /* Format of hardware address */
# define ARP_ETHER 1 /* Ethernet hardware address */
ushort ar_pro; /* Format of protocol address */
uchar ar_hln; /* Length of hardware address */
uchar ar_pln; /* Length of protocol address */
ushort ar_op; /* Operation */
# define ARPOP_REQUEST 1 /* Request to resolve address */
# define ARPOP_REPLY 2 /* Response to previous request */
# define RARPOP_REQUEST 3 /* Request to resolve address */
# define RARPOP_REPLY 4 /* Response to previous request */
/*
* The remaining fields are variable in size, according to
* the sizes above, and are defined as appropriate for
* specific hardware/protocol combinations.
*/
uchar ar_data[0];
#if 0
uchar ar_sha[]; /* Sender hardware address */
uchar ar_spa[]; /* Sender protocol address */
uchar ar_tha[]; /* Target hardware address */
uchar ar_tpa[]; /* Target protocol address */
#endif /* 0 */
} ARP_t;
#define ARP_HDR_SIZE (8+20) /* Size assuming ethernet */
/*
* ICMP stuff (just enough to handle (host) redirect messages)
*/
#define ICMP_ECHO_REPLY 0 /* Echo reply */
#define ICMP_REDIRECT 5 /* Redirect (change route) */
#define ICMP_ECHO_REQUEST 8 /* Echo request */
/* Codes for REDIRECT. */
#define ICMP_REDIR_NET 0 /* Redirect Net */
#define ICMP_REDIR_HOST 1 /* Redirect Host */
typedef struct icmphdr {
uchar type;
uchar code;
ushort checksum;
union {
struct {
ushort id;
ushort sequence;
} echo;
ulong gateway;
struct {
ushort __unused;
ushort mtu;
} frag;
} un;
} ICMP_t;
/*
* Maximum packet size; used to allocate packet storage.
* TFTP packets can be 524 bytes + IP header + ethernet header.
* Lets be conservative, and go for 38 * 16. (Must also be
* a multiple of 32 bytes).
*/
/*
* AS.HARNOIS : Better to set PKTSIZE to maximum size because
* traffic type is not always controlled
* maximum packet size = 1518
* maximum packet size and multiple of 32 bytes = 1536
*/
#define PKTSIZE 1518
#define PKTSIZE_ALIGN 1536
/*#define PKTSIZE 608*/
/*
* Maximum receive ring size; that is, the number of packets
* we can buffer before overflow happens. Basically, this just
* needs to be enough to prevent a packet being discarded while
* we are processing the previous one.
*/
#define RINGSZ 4
#define RINGSZ_LOG2 2
/**********************************************************************/
/*
* Globals.
*
* Note:
*
* All variables of type IPaddr_t are stored in NETWORK byte order
* (big endian).
*/
/* net.c */
/** BOOTP EXTENTIONS **/
extern IPaddr_t NetOurGatewayIP; /* Our gateway IP addresse */
extern IPaddr_t NetOurSubnetMask; /* Our subnet mask (0 = unknown)*/
extern IPaddr_t NetOurDNSIP; /* Our Domain Name Server (0 = unknown)*/
#if defined(CONFIG_BOOTP_DNS2)
extern IPaddr_t NetOurDNS2IP; /* Our 2nd Domain Name Server (0 = unknown)*/
#endif
extern char NetOurNISDomain[32]; /* Our NIS domain */
extern char NetOurHostName[32]; /* Our hostname */
extern char NetOurRootPath[64]; /* Our root path */
extern ushort NetBootFileSize; /* Our boot file size in blocks */
/** END OF BOOTP EXTENTIONS **/
extern ulong NetBootFileXferSize; /* size of bootfile in bytes */
extern uchar NetOurEther[6]; /* Our ethernet address */
extern uchar NetServerEther[6]; /* Boot server enet address */
extern IPaddr_t NetOurIP; /* Our IP addr (0 = unknown) */
extern IPaddr_t NetServerIP; /* Server IP addr (0 = unknown) */
extern volatile uchar * NetTxPacket; /* THE transmit packet */
extern volatile uchar * NetRxPackets[PKTBUFSRX];/* Receive packets */
extern volatile uchar * NetRxPacket; /* Current receive packet */
extern int NetRxPacketLen; /* Current rx packet length */
extern unsigned NetIPID; /* IP ID (counting) */
extern uchar NetBcastAddr[6]; /* Ethernet boardcast address */
extern uchar NetEtherNullAddr[6];
#define VLAN_NONE 4095 /* untagged */
#define VLAN_IDMASK 0x0fff /* mask of valid vlan id */
extern ushort NetOurVLAN; /* Our VLAN */
extern ushort NetOurNativeVLAN; /* Our Native VLAN */
extern uchar NetCDPAddr[6]; /* Ethernet CDP address */
extern ushort CDPNativeVLAN; /* CDP returned native VLAN */
extern ushort CDPApplianceVLAN; /* CDP returned appliance VLAN */
extern int NetState; /* Network loop state */
#define NETLOOP_CONTINUE 1
#define NETLOOP_RESTART 2
#define NETLOOP_SUCCESS 3
#define NETLOOP_FAIL 4
#ifdef CONFIG_NET_MULTI
extern int NetRestartWrap; /* Tried all network devices */
#endif
typedef enum { BOOTP, RARP, ARP, TFTP, DHCP, PING, DNS, NFS, CDP, NETCONS, SNTP } proto_t;
/* from net/net.c */
extern char BootFile[128]; /* Boot File name */
#if defined(CONFIG_CMD_DNS)
extern char *NetDNSResolve; /* The host to resolve */
extern char *NetDNSenvvar; /* the env var to put the ip into */
#endif
#if defined(CONFIG_CMD_PING)
extern IPaddr_t NetPingIP; /* the ip address to ping */
#endif
#if defined(CONFIG_CMD_CDP)
/* when CDP completes these hold the return values */
extern ushort CDPNativeVLAN;
extern ushort CDPApplianceVLAN;
#endif
#if defined(CONFIG_CMD_SNTP)
extern IPaddr_t NetNtpServerIP; /* the ip address to NTP */
extern int NetTimeOffset; /* offset time from UTC */
#endif
/* Initialize the network adapter */
extern int NetLoop(proto_t);
/* Shutdown adapters and cleanup */
extern void NetStop(void);
/* Load failed. Start again. */
extern void NetStartAgain(void);
/* Get size of the ethernet header when we send */
extern int NetEthHdrSize(void);
/* Set ethernet header; returns the size of the header */
extern int NetSetEther(volatile uchar *, uchar *, uint);
/* Set IP header */
extern void NetSetIP(volatile uchar *, IPaddr_t, int, int, int);
/* Checksum */
extern int NetCksumOk(uchar *, int); /* Return true if cksum OK */
extern uint NetCksum(uchar *, int); /* Calculate the checksum */
/* Set callbacks */
extern void NetSetHandler(rxhand_f *); /* Set RX packet handler */
extern void NetSetTimeout(ulong, thand_f *);/* Set timeout handler */
/* Transmit "NetTxPacket" */
extern void NetSendPacket(volatile uchar *, int);
/* Transmit UDP packet, performing ARP request if needed */
extern int NetSendUDPPacket(uchar *ether, IPaddr_t dest, int dport, int sport, int len);
/* Processes a received packet */
extern void NetReceive(volatile uchar *, int);
/*
* The following functions are a bit ugly, but necessary to deal with
* alignment restrictions on ARM.
*
* We're using inline functions, which had the smallest memory
* footprint in our tests.
*/
/* return IP *in network byteorder* */
static inline IPaddr_t NetReadIP(volatile void *from)
{
IPaddr_t ip;
memcpy((void*)&ip, (void*)from, sizeof(ip));
return ip;
}
/* return ulong *in network byteorder* */
static inline ulong NetReadLong(ulong *from)
{
ulong l;
memcpy((void*)&l, (void*)from, sizeof(l));
return l;
}
/* write IP *in network byteorder* */
static inline void NetWriteIP(void *to, IPaddr_t ip)
{
memcpy(to, (void*)&ip, sizeof(ip));
}
/* copy IP */
static inline void NetCopyIP(volatile void *to, void *from)
{
memcpy((void*)to, from, sizeof(IPaddr_t));
}
/* copy ulong */
static inline void NetCopyLong(ulong *to, ulong *from)
{
memcpy((void*)to, (void*)from, sizeof(ulong));
}
/**
* is_zero_ether_addr - Determine if give Ethernet address is all zeros.
* @addr: Pointer to a six-byte array containing the Ethernet address
*
* Return true if the address is all zeroes.
*/
static inline int is_zero_ether_addr(const u8 *addr)
{
return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]);
}
/**
* is_multicast_ether_addr - Determine if the Ethernet address is a multicast.
* @addr: Pointer to a six-byte array containing the Ethernet address
*
* Return true if the address is a multicast address.
* By definition the broadcast address is also a multicast address.
*/
static inline int is_multicast_ether_addr(const u8 *addr)
{
return (0x01 & addr[0]);
}
/**
* is_valid_ether_addr - Determine if the given Ethernet address is valid
* @addr: Pointer to a six-byte array containing the Ethernet address
*
* Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
* a multicast address, and is not FF:FF:FF:FF:FF:FF.
*
* Return true if the address is valid.
*/
static inline int is_valid_ether_addr(const u8 * addr)
{
/* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to
* explicitly check for it here. */
return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr);
}
/* Convert an IP address to a string */
extern void ip_to_string (IPaddr_t x, char *s);
/* Convert a string to ip address */
extern IPaddr_t string_to_ip(char *s);
/* Convert a VLAN id to a string */
extern void VLAN_to_string (ushort x, char *s);
/* Convert a string to a vlan id */
extern ushort string_to_VLAN(char *s);
/* read a VLAN id from an environment variable */
extern ushort getenv_VLAN(char *);
/* copy a filename (allow for "..." notation, limit length) */
extern void copy_filename (char *dst, char *src, int size);
/* get a random source port */
extern unsigned int random_port(void);
/**********************************************************************/
#endif /* __NET_H__ */
Reference in New Issue View Git Blame Copy Permalink