mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-05 10:33:42 +08:00
552e7c57d0
Add support for Cortina CS4223 10G PHY - As per the CS4223 specs, an EEPROM module is connected to the PHY. At startup the PHY reads the firmware line and tries to load the firmware into the internal memory. - This driver reads the EEPROM status and checks if firmware has been loaded Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
79 lines
2.8 KiB
C
79 lines
2.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Cortina PHY drivers
|
|
*
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#ifndef _CORTINA_H_
|
|
#define _CORTINA_H_
|
|
|
|
#define VILLA_GLOBAL_CHIP_ID_LSB 0x000
|
|
#define VILLA_GLOBAL_CHIP_ID_MSB 0x001
|
|
#define VILLA_GLOBAL_BIST_CONTROL 0x002
|
|
#define VILLA_GLOBAL_BIST_STATUS 0x003
|
|
#define VILLA_GLOBAL_LINE_SOFT_RESET 0x007
|
|
#define VILLA_GLOBAL_HOST_SOFT_RESET 0x008
|
|
#define VILLA_GLOBAL_DWNLD_CHECKSUM_CTRL 0x00A
|
|
#define VILLA_GLOBAL_DWNLD_CHECKSUM_STATUS 0x00B
|
|
#define VILLA_GLOBAL_MSEQCLKCTRL 0x00E
|
|
#define VILLA_MSEQ_OPTIONS 0x1D0
|
|
#define VILLA_MSEQ_PC 0x1D3
|
|
#define VILLA_MSEQ_BANKSELECT 0x1DF
|
|
#define VILLA_DSP_SDS_DSP_COEF_DFE0_SELECT 0x2DB
|
|
#define VILLA_DSP_SDS_SERDES_SRX_DFE0_SELECT 0x36E
|
|
#define VILLA_LINE_SDS_COMMON_SRX0_RX_LOOP_FILTER 0x403
|
|
#define VILLA_LINE_SDS_COMMON_SRX0_RX_CPA 0x404
|
|
#define VILLA_LINE_SDS_COMMON_SRX0_RX_CPB 0x405
|
|
#define VILLA_DSP_SDS_SERDES_SRX_FFE_DELAY_CTRL 0x369
|
|
#define VILLA_MSEQ_ENABLE_MSB 0x194
|
|
#define VILLA_MSEQ_SPARE21_LSB 0x226
|
|
#define VILLA_MSEQ_RESET_COUNT_LSB 0x1E0
|
|
#define VILLA_MSEQ_SPARE12_MSB 0x215
|
|
#define VILLA_MSEQ_SPARE2_LSB 0x200
|
|
#define VILLA_MSEQ_SPARE7_LSB 0x20A
|
|
#define VILLA_MSEQ_SPARE9_LSB 0x20E
|
|
#define VILLA_MSEQ_SPARE3_LSB 0x202
|
|
#define VILLA_MSEQ_SPARE3_MSB 0x203
|
|
#define VILLA_MSEQ_SPARE8_LSB 0x20C
|
|
#define VILLA_MSEQ_SPARE8_MSB 0x20D
|
|
#define VILLA_MSEQ_COEF8_FFE0_LSB 0x1E2
|
|
#define VILLA_MSEQ_COEF8_FFE1_LSB 0x1E4
|
|
#define VILLA_MSEQ_COEF8_FFE2_LSB 0x1E6
|
|
#define VILLA_MSEQ_COEF8_FFE3_LSB 0x1E8
|
|
#define VILLA_MSEQ_COEF8_FFE4_LSB 0x1EA
|
|
#define VILLA_MSEQ_COEF8_FFE5_LSB 0x1EC
|
|
#define VILLA_MSEQ_COEF8_DFE0_LSB 0x1F0
|
|
#define VILLA_MSEQ_COEF8_DFE0N_LSB 0x1EE
|
|
#define VILLA_MSEQ_COEF8_DFE1_LSB 0x1F2
|
|
#define VILLA_DSP_SDS_DSP_COEF_LARGE_LEAK 0x2E2
|
|
#define VILLA_DSP_SDS_SERDES_SRX_DAC_ENABLEB_LSB 0x360
|
|
#define VILLA_MSEQ_POWER_DOWN_LSB 0x198
|
|
#define VILLA_MSEQ_POWER_DOWN_MSB 0x199
|
|
#define VILLA_MSEQ_CAL_RX_SLICER 0x1B8
|
|
#define VILLA_DSP_SDS_SERDES_SRX_DAC_BIAS_SELECT1_MSB 0x365
|
|
#define VILLA_MSEQ_COEF_INIT_SEL 0x1AE
|
|
#define VILLA_DSP_SDS_DSP_PRECODEDINITFFE21 0x26A
|
|
#define VILLA_MSEQ_SERDES_PARAM_LSB 0x195
|
|
#define VILLA_MSEQ_SPARE25_LSB 0x22E
|
|
#define VILLA_MSEQ_SPARE23_LSB 0x22A
|
|
#define VILLA_MSEQ_CAL_RX_DFE_EQ 0x1BA
|
|
#define VILLA_GLOBAL_VILLA2_COMPATIBLE 0x030
|
|
#define VILLA_HOST_SDS_COMMON_STX0_TX_OUTPUT_CTRLA 0x812
|
|
#define VILLA_HOST_SDS_COMMON_STX0_TX_OUTPUT_CTRLB 0x813
|
|
#define VILLA_LINE_SDS_COMMON_STX0_TX_OUTPUT_CTRLA 0x427
|
|
#define VILLA_LINE_SDS_COMMON_STX0_TX_OUTPUT_CTRLB 0x428
|
|
|
|
/* Cortina CS4223 */
|
|
#define CS4223_EEPROM_STATUS 0x5001
|
|
#define CS4223_EEPROM_FIRMWARE_LOADDONE 0x1
|
|
|
|
#define mseq_edc_bist_done (0x1<<0)
|
|
#define mseq_edc_bist_fail (0x1<<8)
|
|
|
|
struct cortina_reg_config {
|
|
unsigned short reg_addr;
|
|
unsigned short reg_value;
|
|
};
|
|
#endif
|