u-boot/drivers/dfu/dfu_nand.c
Peter Tyser 9ac71f112e dfu: nand: Verify writes
Previously NAND writes were not verified and could fail silently.  Add
a verification step after all writes to NAND.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
2015-03-30 23:24:38 -05:00

238 lines
5.4 KiB
C

/*
* dfu_nand.c -- DFU for NAND routines.
*
* Copyright (C) 2012-2013 Texas Instruments, Inc.
*
* Based on dfu_mmc.c which is:
* Copyright (C) 2012 Samsung Electronics
* author: Lukasz Majewski <l.majewski@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <malloc.h>
#include <errno.h>
#include <div64.h>
#include <dfu.h>
#include <linux/mtd/mtd.h>
#include <jffs2/load_kernel.h>
#include <nand.h>
static int nand_block_op(enum dfu_op op, struct dfu_entity *dfu,
u64 offset, void *buf, long *len)
{
loff_t start, lim;
size_t count, actual;
int ret;
nand_info_t *nand;
/* if buf == NULL return total size of the area */
if (buf == NULL) {
*len = dfu->data.nand.size;
return 0;
}
start = dfu->data.nand.start + offset + dfu->bad_skip;
lim = dfu->data.nand.start + dfu->data.nand.size - start;
count = *len;
if (nand_curr_device < 0 ||
nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
!nand_info[nand_curr_device].name) {
printf("%s: invalid nand device\n", __func__);
return -1;
}
nand = &nand_info[nand_curr_device];
if (op == DFU_OP_READ) {
ret = nand_read_skip_bad(nand, start, &count, &actual,
lim, buf);
} else {
nand_erase_options_t opts;
memset(&opts, 0, sizeof(opts));
opts.offset = start;
opts.length = count;
opts.spread = 1;
opts.quiet = 1;
opts.lim = lim;
/* first erase */
ret = nand_erase_opts(nand, &opts);
if (ret)
return ret;
/* then write */
ret = nand_write_skip_bad(nand, start, &count, &actual,
lim, buf, WITH_WR_VERIFY);
}
if (ret != 0) {
printf("%s: nand_%s_skip_bad call failed at %llx!\n",
__func__, op == DFU_OP_READ ? "read" : "write",
start);
return ret;
}
/*
* Find out where we stopped writing data. This can be deeper into
* the NAND than we expected due to having to skip bad blocks. So
* we must take this into account for the next write, if any.
*/
if (actual > count)
dfu->bad_skip += actual - count;
return ret;
}
static inline int nand_block_write(struct dfu_entity *dfu,
u64 offset, void *buf, long *len)
{
return nand_block_op(DFU_OP_WRITE, dfu, offset, buf, len);
}
static inline int nand_block_read(struct dfu_entity *dfu,
u64 offset, void *buf, long *len)
{
return nand_block_op(DFU_OP_READ, dfu, offset, buf, len);
}
static int dfu_write_medium_nand(struct dfu_entity *dfu,
u64 offset, void *buf, long *len)
{
int ret = -1;
switch (dfu->layout) {
case DFU_RAW_ADDR:
ret = nand_block_write(dfu, offset, buf, len);
break;
default:
printf("%s: Layout (%s) not (yet) supported!\n", __func__,
dfu_get_layout(dfu->layout));
}
return ret;
}
long dfu_get_medium_size_nand(struct dfu_entity *dfu)
{
return dfu->data.nand.size;
}
static int dfu_read_medium_nand(struct dfu_entity *dfu, u64 offset, void *buf,
long *len)
{
int ret = -1;
switch (dfu->layout) {
case DFU_RAW_ADDR:
ret = nand_block_read(dfu, offset, buf, len);
break;
default:
printf("%s: Layout (%s) not (yet) supported!\n", __func__,
dfu_get_layout(dfu->layout));
}
return ret;
}
static int dfu_flush_medium_nand(struct dfu_entity *dfu)
{
int ret = 0;
/* in case of ubi partition, erase rest of the partition */
if (dfu->data.nand.ubi) {
nand_info_t *nand;
nand_erase_options_t opts;
if (nand_curr_device < 0 ||
nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
!nand_info[nand_curr_device].name) {
printf("%s: invalid nand device\n", __func__);
return -1;
}
nand = &nand_info[nand_curr_device];
memset(&opts, 0, sizeof(opts));
opts.offset = dfu->data.nand.start + dfu->offset +
dfu->bad_skip;
opts.length = dfu->data.nand.start +
dfu->data.nand.size - opts.offset;
ret = nand_erase_opts(nand, &opts);
if (ret != 0)
printf("Failure erase: %d\n", ret);
}
return ret;
}
unsigned int dfu_polltimeout_nand(struct dfu_entity *dfu)
{
/*
* Currently, Poll Timeout != 0 is only needed on nand
* ubi partition, as the not used sectors need an erase
*/
if (dfu->data.nand.ubi)
return DFU_MANIFEST_POLL_TIMEOUT;
return DFU_DEFAULT_POLL_TIMEOUT;
}
int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, char *s)
{
char *st;
int ret, dev, part;
dfu->data.nand.ubi = 0;
dfu->dev_type = DFU_DEV_NAND;
st = strsep(&s, " ");
if (!strcmp(st, "raw")) {
dfu->layout = DFU_RAW_ADDR;
dfu->data.nand.start = simple_strtoul(s, &s, 16);
s++;
dfu->data.nand.size = simple_strtoul(s, &s, 16);
} else if ((!strcmp(st, "part")) || (!strcmp(st, "partubi"))) {
char mtd_id[32];
struct mtd_device *mtd_dev;
u8 part_num;
struct part_info *pi;
dfu->layout = DFU_RAW_ADDR;
dev = simple_strtoul(s, &s, 10);
s++;
part = simple_strtoul(s, &s, 10);
sprintf(mtd_id, "%s%d,%d", "nand", dev, part - 1);
printf("using id '%s'\n", mtd_id);
mtdparts_init();
ret = find_dev_and_part(mtd_id, &mtd_dev, &part_num, &pi);
if (ret != 0) {
printf("Could not locate '%s'\n", mtd_id);
return -1;
}
dfu->data.nand.start = pi->offset;
dfu->data.nand.size = pi->size;
if (!strcmp(st, "partubi"))
dfu->data.nand.ubi = 1;
} else {
printf("%s: Memory layout (%s) not supported!\n", __func__, st);
return -1;
}
dfu->get_medium_size = dfu_get_medium_size_nand;
dfu->read_medium = dfu_read_medium_nand;
dfu->write_medium = dfu_write_medium_nand;
dfu->flush_medium = dfu_flush_medium_nand;
dfu->poll_timeout = dfu_polltimeout_nand;
/* initial state */
dfu->inited = 0;
return 0;
}