u-boot/include/configs/chromebook_link.h
Simon Glass 79b303467a x86: config: Enable USB on link
Enable USB support on link - there are two EHCI ports available.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 06:34:02 -07:00

74 lines
1.9 KiB
C

/*
* Copyright (c) 2011 The Chromium OS Authors.
* (C) Copyright 2008
* Graeme Russ, graeme.russ@gmail.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* board/config.h - configuration options, board specific
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <configs/x86-common.h>
#define CONFIG_SYS_CAR_ADDR 0xff7e0000
#define CONFIG_SYS_CAR_SIZE (128 * 1024)
#define CONFIG_SYS_MONITOR_LEN (1 << 20)
#define CONFIG_DCACHE_RAM_MRC_VAR_SIZE 0x4000
#define CONFIG_SYS_X86_START16 0xfffff800
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_X86_RESET_VECTOR
#define CONFIG_NR_DRAM_BANKS 8
#define CONFIG_X86_MRC_START 0xfffa0000
#define CONFIG_CACHE_MRC_SIZE_KB 512
#define CONFIG_COREBOOT_SERIAL
#define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_INTEL, \
PCI_DEVICE_ID_INTEL_NM10_AHCI}, \
{PCI_VENDOR_ID_INTEL, \
PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_MOBILE}, \
{PCI_VENDOR_ID_INTEL, \
PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_SERIES6}, \
{PCI_VENDOR_ID_INTEL, \
PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}
/*
* These common x86 features are not yet supported, but are added in
* follow-on patches in this series. Add undefs here to avoid every patch
* having to put things back into x86-common.h
*/
#undef CONFIG_VIDEO
#undef CONFIG_CFB_CONSOLE
#undef CONFIG_ICH_SPI
#undef CONFIG_SPI
#undef CONFIG_CMD_SPI
#undef CONFIG_CMD_SF
#define CONFIG_PCI_MEM_BUS 0xe0000000
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE 0x10000000
#define CONFIG_PCI_PREF_BUS 0xd0000000
#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS
#define CONFIG_PCI_PREF_SIZE 0x10000000
#define CONFIG_PCI_IO_BUS 0x1000
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0xefff
#define CONFIG_SYS_EARLY_PCI_INIT
#define CONFIG_PCI_PNP
#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \
"stdout=vga,serial\0" \
"stderr=vga,serial\0"
#endif /* __CONFIG_H */