mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-26 05:34:30 +08:00
cf39cf5597
We are seeing occasional timeouts in the Tegra mmc code when we are reading from external MMC cards. These don't seem to be detrimental if they are handled properly. This CL properly clears the "normal interrupt status register" (norintsts) in error conditions. If we don't do this, when we come back into mmc_send_cmd() the register will still contain status from the last transaction. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
571 lines
14 KiB
C
571 lines
14 KiB
C
/*
|
|
* (C) Copyright 2009 SAMSUNG Electronics
|
|
* Minkyu Kang <mk7.kang@samsung.com>
|
|
* Jaehoon Chung <jh80.chung@samsung.com>
|
|
* Portions Copyright 2011 NVIDIA Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mmc.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clk_rst.h>
|
|
#include <asm/arch/clock.h>
|
|
#include "tegra2_mmc.h"
|
|
|
|
/* support 4 mmc hosts */
|
|
struct mmc mmc_dev[4];
|
|
struct mmc_host mmc_host[4];
|
|
|
|
|
|
/**
|
|
* Get the host address and peripheral ID for a device. Devices are numbered
|
|
* from 0 to 3.
|
|
*
|
|
* @param host Structure to fill in (base, reg, mmc_id)
|
|
* @param dev_index Device index (0-3)
|
|
*/
|
|
static void tegra2_get_setup(struct mmc_host *host, int dev_index)
|
|
{
|
|
debug("tegra2_get_base_mmc: dev_index = %d\n", dev_index);
|
|
|
|
switch (dev_index) {
|
|
case 1:
|
|
host->base = TEGRA2_SDMMC3_BASE;
|
|
host->mmc_id = PERIPH_ID_SDMMC3;
|
|
break;
|
|
case 2:
|
|
host->base = TEGRA2_SDMMC2_BASE;
|
|
host->mmc_id = PERIPH_ID_SDMMC2;
|
|
break;
|
|
case 3:
|
|
host->base = TEGRA2_SDMMC1_BASE;
|
|
host->mmc_id = PERIPH_ID_SDMMC1;
|
|
break;
|
|
case 0:
|
|
default:
|
|
host->base = TEGRA2_SDMMC4_BASE;
|
|
host->mmc_id = PERIPH_ID_SDMMC4;
|
|
break;
|
|
}
|
|
|
|
host->reg = (struct tegra2_mmc *)host->base;
|
|
}
|
|
|
|
static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data)
|
|
{
|
|
unsigned char ctrl;
|
|
|
|
debug("data->dest: %08X, data->blocks: %u, data->blocksize: %u\n",
|
|
(u32)data->dest, data->blocks, data->blocksize);
|
|
|
|
writel((u32)data->dest, &host->reg->sysad);
|
|
/*
|
|
* DMASEL[4:3]
|
|
* 00 = Selects SDMA
|
|
* 01 = Reserved
|
|
* 10 = Selects 32-bit Address ADMA2
|
|
* 11 = Selects 64-bit Address ADMA2
|
|
*/
|
|
ctrl = readb(&host->reg->hostctl);
|
|
ctrl &= ~TEGRA_MMC_HOSTCTL_DMASEL_MASK;
|
|
ctrl |= TEGRA_MMC_HOSTCTL_DMASEL_SDMA;
|
|
writeb(ctrl, &host->reg->hostctl);
|
|
|
|
/* We do not handle DMA boundaries, so set it to max (512 KiB) */
|
|
writew((7 << 12) | (data->blocksize & 0xFFF), &host->reg->blksize);
|
|
writew(data->blocks, &host->reg->blkcnt);
|
|
}
|
|
|
|
static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data)
|
|
{
|
|
unsigned short mode;
|
|
debug(" mmc_set_transfer_mode called\n");
|
|
/*
|
|
* TRNMOD
|
|
* MUL1SIN0[5] : Multi/Single Block Select
|
|
* RD1WT0[4] : Data Transfer Direction Select
|
|
* 1 = read
|
|
* 0 = write
|
|
* ENACMD12[2] : Auto CMD12 Enable
|
|
* ENBLKCNT[1] : Block Count Enable
|
|
* ENDMA[0] : DMA Enable
|
|
*/
|
|
mode = (TEGRA_MMC_TRNMOD_DMA_ENABLE |
|
|
TEGRA_MMC_TRNMOD_BLOCK_COUNT_ENABLE);
|
|
|
|
if (data->blocks > 1)
|
|
mode |= TEGRA_MMC_TRNMOD_MULTI_BLOCK_SELECT;
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
mode |= TEGRA_MMC_TRNMOD_DATA_XFER_DIR_SEL_READ;
|
|
|
|
if (data->flags & MMC_DATA_WRITE) {
|
|
if ((uintptr_t)data->src & (ARCH_DMA_MINALIGN - 1))
|
|
printf("Warning: unaligned write to %p may fail\n",
|
|
data->src);
|
|
flush_dcache_range((ulong)data->src, (ulong)data->src +
|
|
data->blocks * data->blocksize);
|
|
}
|
|
|
|
writew(mode, &host->reg->trnmod);
|
|
}
|
|
|
|
static int mmc_wait_inhibit(struct mmc_host *host,
|
|
struct mmc_cmd *cmd,
|
|
struct mmc_data *data,
|
|
unsigned int timeout)
|
|
{
|
|
/*
|
|
* PRNSTS
|
|
* CMDINHDAT[1] : Command Inhibit (DAT)
|
|
* CMDINHCMD[0] : Command Inhibit (CMD)
|
|
*/
|
|
unsigned int mask = TEGRA_MMC_PRNSTS_CMD_INHIBIT_CMD;
|
|
|
|
/*
|
|
* We shouldn't wait for data inhibit for stop commands, even
|
|
* though they might use busy signaling
|
|
*/
|
|
if ((data == NULL) && (cmd->resp_type & MMC_RSP_BUSY))
|
|
mask |= TEGRA_MMC_PRNSTS_CMD_INHIBIT_DAT;
|
|
|
|
while (readl(&host->reg->prnsts) & mask) {
|
|
if (timeout == 0) {
|
|
printf("%s: timeout error\n", __func__);
|
|
return -1;
|
|
}
|
|
timeout--;
|
|
udelay(1000);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct mmc_host *host = (struct mmc_host *)mmc->priv;
|
|
int flags, i;
|
|
int result;
|
|
unsigned int mask;
|
|
unsigned int retry = 0x100000;
|
|
debug(" mmc_send_cmd called\n");
|
|
|
|
result = mmc_wait_inhibit(host, cmd, data, 10 /* ms */);
|
|
|
|
if (result < 0)
|
|
return result;
|
|
|
|
if (data)
|
|
mmc_prepare_data(host, data);
|
|
|
|
debug("cmd->arg: %08x\n", cmd->cmdarg);
|
|
writel(cmd->cmdarg, &host->reg->argument);
|
|
|
|
if (data)
|
|
mmc_set_transfer_mode(host, data);
|
|
|
|
if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
|
|
return -1;
|
|
|
|
/*
|
|
* CMDREG
|
|
* CMDIDX[13:8] : Command index
|
|
* DATAPRNT[5] : Data Present Select
|
|
* ENCMDIDX[4] : Command Index Check Enable
|
|
* ENCMDCRC[3] : Command CRC Check Enable
|
|
* RSPTYP[1:0]
|
|
* 00 = No Response
|
|
* 01 = Length 136
|
|
* 10 = Length 48
|
|
* 11 = Length 48 Check busy after response
|
|
*/
|
|
if (!(cmd->resp_type & MMC_RSP_PRESENT))
|
|
flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_NO_RESPONSE;
|
|
else if (cmd->resp_type & MMC_RSP_136)
|
|
flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_136;
|
|
else if (cmd->resp_type & MMC_RSP_BUSY)
|
|
flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48_BUSY;
|
|
else
|
|
flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48;
|
|
|
|
if (cmd->resp_type & MMC_RSP_CRC)
|
|
flags |= TEGRA_MMC_TRNMOD_CMD_CRC_CHECK;
|
|
if (cmd->resp_type & MMC_RSP_OPCODE)
|
|
flags |= TEGRA_MMC_TRNMOD_CMD_INDEX_CHECK;
|
|
if (data)
|
|
flags |= TEGRA_MMC_TRNMOD_DATA_PRESENT_SELECT_DATA_TRANSFER;
|
|
|
|
debug("cmd: %d\n", cmd->cmdidx);
|
|
|
|
writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg);
|
|
|
|
for (i = 0; i < retry; i++) {
|
|
mask = readl(&host->reg->norintsts);
|
|
/* Command Complete */
|
|
if (mask & TEGRA_MMC_NORINTSTS_CMD_COMPLETE) {
|
|
if (!data)
|
|
writel(mask, &host->reg->norintsts);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == retry) {
|
|
printf("%s: waiting for status update\n", __func__);
|
|
writel(mask, &host->reg->norintsts);
|
|
return TIMEOUT;
|
|
}
|
|
|
|
if (mask & TEGRA_MMC_NORINTSTS_CMD_TIMEOUT) {
|
|
/* Timeout Error */
|
|
debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx);
|
|
writel(mask, &host->reg->norintsts);
|
|
return TIMEOUT;
|
|
} else if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) {
|
|
/* Error Interrupt */
|
|
debug("error: %08x cmd %d\n", mask, cmd->cmdidx);
|
|
writel(mask, &host->reg->norintsts);
|
|
return -1;
|
|
}
|
|
|
|
if (cmd->resp_type & MMC_RSP_PRESENT) {
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
/* CRC is stripped so we need to do some shifting. */
|
|
for (i = 0; i < 4; i++) {
|
|
unsigned int offset =
|
|
(unsigned int)(&host->reg->rspreg3 - i);
|
|
cmd->response[i] = readl(offset) << 8;
|
|
|
|
if (i != 3) {
|
|
cmd->response[i] |=
|
|
readb(offset - 1);
|
|
}
|
|
debug("cmd->resp[%d]: %08x\n",
|
|
i, cmd->response[i]);
|
|
}
|
|
} else if (cmd->resp_type & MMC_RSP_BUSY) {
|
|
for (i = 0; i < retry; i++) {
|
|
/* PRNTDATA[23:20] : DAT[3:0] Line Signal */
|
|
if (readl(&host->reg->prnsts)
|
|
& (1 << 20)) /* DAT[0] */
|
|
break;
|
|
}
|
|
|
|
if (i == retry) {
|
|
printf("%s: card is still busy\n", __func__);
|
|
writel(mask, &host->reg->norintsts);
|
|
return TIMEOUT;
|
|
}
|
|
|
|
cmd->response[0] = readl(&host->reg->rspreg0);
|
|
debug("cmd->resp[0]: %08x\n", cmd->response[0]);
|
|
} else {
|
|
cmd->response[0] = readl(&host->reg->rspreg0);
|
|
debug("cmd->resp[0]: %08x\n", cmd->response[0]);
|
|
}
|
|
}
|
|
|
|
if (data) {
|
|
unsigned long start = get_timer(0);
|
|
|
|
while (1) {
|
|
mask = readl(&host->reg->norintsts);
|
|
|
|
if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) {
|
|
/* Error Interrupt */
|
|
writel(mask, &host->reg->norintsts);
|
|
printf("%s: error during transfer: 0x%08x\n",
|
|
__func__, mask);
|
|
return -1;
|
|
} else if (mask & TEGRA_MMC_NORINTSTS_DMA_INTERRUPT) {
|
|
/*
|
|
* DMA Interrupt, restart the transfer where
|
|
* it was interrupted.
|
|
*/
|
|
unsigned int address = readl(&host->reg->sysad);
|
|
|
|
debug("DMA end\n");
|
|
writel(TEGRA_MMC_NORINTSTS_DMA_INTERRUPT,
|
|
&host->reg->norintsts);
|
|
writel(address, &host->reg->sysad);
|
|
} else if (mask & TEGRA_MMC_NORINTSTS_XFER_COMPLETE) {
|
|
/* Transfer Complete */
|
|
debug("r/w is done\n");
|
|
break;
|
|
} else if (get_timer(start) > 2000UL) {
|
|
writel(mask, &host->reg->norintsts);
|
|
printf("%s: MMC Timeout\n"
|
|
" Interrupt status 0x%08x\n"
|
|
" Interrupt status enable 0x%08x\n"
|
|
" Interrupt signal enable 0x%08x\n"
|
|
" Present status 0x%08x\n",
|
|
__func__, mask,
|
|
readl(&host->reg->norintstsen),
|
|
readl(&host->reg->norintsigen),
|
|
readl(&host->reg->prnsts));
|
|
return -1;
|
|
}
|
|
}
|
|
writel(mask, &host->reg->norintsts);
|
|
if (data->flags & MMC_DATA_READ) {
|
|
if ((uintptr_t)data->dest & (ARCH_DMA_MINALIGN - 1))
|
|
printf("Warning: unaligned read from %p "
|
|
"may fail\n", data->dest);
|
|
invalidate_dcache_range((ulong)data->dest,
|
|
(ulong)data->dest +
|
|
data->blocks * data->blocksize);
|
|
}
|
|
}
|
|
|
|
udelay(1000);
|
|
return 0;
|
|
}
|
|
|
|
static void mmc_change_clock(struct mmc_host *host, uint clock)
|
|
{
|
|
int div;
|
|
unsigned short clk;
|
|
unsigned long timeout;
|
|
|
|
debug(" mmc_change_clock called\n");
|
|
|
|
/*
|
|
* Change Tegra2 SDMMCx clock divisor here. Source is 216MHz,
|
|
* PLLP_OUT0
|
|
*/
|
|
if (clock == 0)
|
|
goto out;
|
|
clock_adjust_periph_pll_div(host->mmc_id, CLOCK_ID_PERIPH, clock,
|
|
&div);
|
|
debug("div = %d\n", div);
|
|
|
|
writew(0, &host->reg->clkcon);
|
|
|
|
/*
|
|
* CLKCON
|
|
* SELFREQ[15:8] : base clock divided by value
|
|
* ENSDCLK[2] : SD Clock Enable
|
|
* STBLINTCLK[1] : Internal Clock Stable
|
|
* ENINTCLK[0] : Internal Clock Enable
|
|
*/
|
|
div >>= 1;
|
|
clk = ((div << TEGRA_MMC_CLKCON_SDCLK_FREQ_SEL_SHIFT) |
|
|
TEGRA_MMC_CLKCON_INTERNAL_CLOCK_ENABLE);
|
|
writew(clk, &host->reg->clkcon);
|
|
|
|
/* Wait max 10 ms */
|
|
timeout = 10;
|
|
while (!(readw(&host->reg->clkcon) &
|
|
TEGRA_MMC_CLKCON_INTERNAL_CLOCK_STABLE)) {
|
|
if (timeout == 0) {
|
|
printf("%s: timeout error\n", __func__);
|
|
return;
|
|
}
|
|
timeout--;
|
|
udelay(1000);
|
|
}
|
|
|
|
clk |= TEGRA_MMC_CLKCON_SD_CLOCK_ENABLE;
|
|
writew(clk, &host->reg->clkcon);
|
|
|
|
debug("mmc_change_clock: clkcon = %08X\n", clk);
|
|
|
|
out:
|
|
host->clock = clock;
|
|
}
|
|
|
|
static void mmc_set_ios(struct mmc *mmc)
|
|
{
|
|
struct mmc_host *host = mmc->priv;
|
|
unsigned char ctrl;
|
|
debug(" mmc_set_ios called\n");
|
|
|
|
debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
|
|
|
|
/* Change clock first */
|
|
mmc_change_clock(host, mmc->clock);
|
|
|
|
ctrl = readb(&host->reg->hostctl);
|
|
|
|
/*
|
|
* WIDE8[5]
|
|
* 0 = Depend on WIDE4
|
|
* 1 = 8-bit mode
|
|
* WIDE4[1]
|
|
* 1 = 4-bit mode
|
|
* 0 = 1-bit mode
|
|
*/
|
|
if (mmc->bus_width == 8)
|
|
ctrl |= (1 << 5);
|
|
else if (mmc->bus_width == 4)
|
|
ctrl |= (1 << 1);
|
|
else
|
|
ctrl &= ~(1 << 1);
|
|
|
|
writeb(ctrl, &host->reg->hostctl);
|
|
debug("mmc_set_ios: hostctl = %08X\n", ctrl);
|
|
}
|
|
|
|
static void mmc_reset(struct mmc_host *host)
|
|
{
|
|
unsigned int timeout;
|
|
debug(" mmc_reset called\n");
|
|
|
|
/*
|
|
* RSTALL[0] : Software reset for all
|
|
* 1 = reset
|
|
* 0 = work
|
|
*/
|
|
writeb(TEGRA_MMC_SWRST_SW_RESET_FOR_ALL, &host->reg->swrst);
|
|
|
|
host->clock = 0;
|
|
|
|
/* Wait max 100 ms */
|
|
timeout = 100;
|
|
|
|
/* hw clears the bit when it's done */
|
|
while (readb(&host->reg->swrst) & TEGRA_MMC_SWRST_SW_RESET_FOR_ALL) {
|
|
if (timeout == 0) {
|
|
printf("%s: timeout error\n", __func__);
|
|
return;
|
|
}
|
|
timeout--;
|
|
udelay(1000);
|
|
}
|
|
}
|
|
|
|
static int mmc_core_init(struct mmc *mmc)
|
|
{
|
|
struct mmc_host *host = (struct mmc_host *)mmc->priv;
|
|
unsigned int mask;
|
|
debug(" mmc_core_init called\n");
|
|
|
|
mmc_reset(host);
|
|
|
|
host->version = readw(&host->reg->hcver);
|
|
debug("host version = %x\n", host->version);
|
|
|
|
/* mask all */
|
|
writel(0xffffffff, &host->reg->norintstsen);
|
|
writel(0xffffffff, &host->reg->norintsigen);
|
|
|
|
writeb(0xe, &host->reg->timeoutcon); /* TMCLK * 2^27 */
|
|
/*
|
|
* NORMAL Interrupt Status Enable Register init
|
|
* [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable
|
|
* [4] ENSTABUFWTRDY : Buffer write Ready Status Enable
|
|
* [3] ENSTADMAINT : DMA boundary interrupt
|
|
* [1] ENSTASTANSCMPLT : Transfre Complete Status Enable
|
|
* [0] ENSTACMDCMPLT : Command Complete Status Enable
|
|
*/
|
|
mask = readl(&host->reg->norintstsen);
|
|
mask &= ~(0xffff);
|
|
mask |= (TEGRA_MMC_NORINTSTSEN_CMD_COMPLETE |
|
|
TEGRA_MMC_NORINTSTSEN_XFER_COMPLETE |
|
|
TEGRA_MMC_NORINTSTSEN_DMA_INTERRUPT |
|
|
TEGRA_MMC_NORINTSTSEN_BUFFER_WRITE_READY |
|
|
TEGRA_MMC_NORINTSTSEN_BUFFER_READ_READY);
|
|
writel(mask, &host->reg->norintstsen);
|
|
|
|
/*
|
|
* NORMAL Interrupt Signal Enable Register init
|
|
* [1] ENSTACMDCMPLT : Transfer Complete Signal Enable
|
|
*/
|
|
mask = readl(&host->reg->norintsigen);
|
|
mask &= ~(0xffff);
|
|
mask |= TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE;
|
|
writel(mask, &host->reg->norintsigen);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int tegra2_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
struct mmc_host *host = (struct mmc_host *)mmc->priv;
|
|
|
|
debug("tegra2_mmc_getcd called\n");
|
|
|
|
if (host->cd_gpio >= 0)
|
|
return !gpio_get_value(host->cd_gpio);
|
|
|
|
return 1;
|
|
}
|
|
|
|
int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
|
|
{
|
|
struct mmc_host *host;
|
|
char gpusage[12]; /* "SD/MMCn PWR" or "SD/MMCn CD" */
|
|
struct mmc *mmc;
|
|
|
|
debug(" tegra2_mmc_init: index %d, bus width %d "
|
|
"pwr_gpio %d cd_gpio %d\n",
|
|
dev_index, bus_width, pwr_gpio, cd_gpio);
|
|
|
|
host = &mmc_host[dev_index];
|
|
|
|
host->clock = 0;
|
|
host->pwr_gpio = pwr_gpio;
|
|
host->cd_gpio = cd_gpio;
|
|
tegra2_get_setup(host, dev_index);
|
|
|
|
clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000);
|
|
|
|
if (host->pwr_gpio >= 0) {
|
|
sprintf(gpusage, "SD/MMC%d PWR", dev_index);
|
|
gpio_request(host->pwr_gpio, gpusage);
|
|
gpio_direction_output(host->pwr_gpio, 1);
|
|
}
|
|
|
|
if (host->cd_gpio >= 0) {
|
|
sprintf(gpusage, "SD/MMC%d CD", dev_index);
|
|
gpio_request(host->cd_gpio, gpusage);
|
|
gpio_direction_input(host->cd_gpio);
|
|
}
|
|
|
|
mmc = &mmc_dev[dev_index];
|
|
|
|
sprintf(mmc->name, "Tegra2 SD/MMC");
|
|
mmc->priv = host;
|
|
mmc->send_cmd = mmc_send_cmd;
|
|
mmc->set_ios = mmc_set_ios;
|
|
mmc->init = mmc_core_init;
|
|
mmc->getcd = tegra2_mmc_getcd;
|
|
|
|
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
|
|
if (bus_width == 8)
|
|
mmc->host_caps = MMC_MODE_8BIT;
|
|
else
|
|
mmc->host_caps = MMC_MODE_4BIT;
|
|
mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;
|
|
|
|
/*
|
|
* min freq is for card identification, and is the highest
|
|
* low-speed SDIO card frequency (actually 400KHz)
|
|
* max freq is highest HS eMMC clock as per the SD/MMC spec
|
|
* (actually 52MHz)
|
|
* Both of these are the closest equivalents w/216MHz source
|
|
* clock and Tegra2 SDMMC divisors.
|
|
*/
|
|
mmc->f_min = 375000;
|
|
mmc->f_max = 48000000;
|
|
|
|
mmc_register(mmc);
|
|
|
|
return 0;
|
|
}
|