u-boot/include/configs/phycore_am335x_r2.h
Tom Rini 7d08077334 Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MMC_ENV_DEV
   CONFIG_SYS_MMC_ENV_PART

Note that with this conversion we now have consistent behavior with
respect to ensuring that we have always selected the correct MMC
device and hardware partition.

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-08 11:03:52 -04:00

126 lines
3.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* phycore_am335x_r2.h
*
* Phytec phyCORE-AM335x R2 (PCL060 / PCM060) boards information header
*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
* Copyright (C) 2013 Lars Poeschel, Lemonage Software GmbH
* Copyright (C) 2019 DENX Software Engineering GmbH
*/
#ifndef __CONFIG_PHYCORE_AM335x_R2_H
#define __CONFIG_PHYCORE_AM335x_R2_H
#include <configs/ti_am335x_common.h>
#define CONFIG_MACH_TYPE MACH_TYPE_SBC_PHYCORE_AM335X
#ifdef CONFIG_MTD_RAW_NAND
#define NANDARGS \
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"nandargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${nandroot} " \
"rootfstype=${nandrootfstype}\0" \
"nandroot=ubi0:root ubi.mtd=NAND.UBI\0" \
"nandrootfstype=ubifs rootwait rw fsck.repair=yes\0" \
"nandboot=echo Booting from nand ...; " \
"run nandargs; " \
"ubi part NAND.UBI; " \
"ubi readvol ${fdtaddr} oftree; " \
"ubi readvol ${loadaddr} kernel; " \
"bootz ${loadaddr} - ${fdtaddr}\0"
#else
#define NANDARGS ""
#endif
/* set to negative value for no autoboot */
#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
"bootcmd_" #devtypel #instance "=" \
"setenv mmcdev " #instance "; "\
"setenv bootpart " #instance ":1 ; "\
"setenv rootpart " #instance ":2 ; "\
"run mmcboot\0"
#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \
#devtypel #instance " "
#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
"bootcmd_" #devtypel #instance "=" \
"run nandboot\0"
#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
#devtypel #instance " "
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(LEGACY_MMC, legacy_mmc, 0) \
func(MMC, mmc, 1) \
func(LEGACY_MMC, legacy_mmc, 1) \
func(NAND, nand, 0)
#include <config_distro_bootcmd.h>
#include <environment/ti/dfu.h>
#include <environment/ti/mmc.h>
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_MMC_TI_ARGS \
DEFAULT_LINUX_BOOT_ENV \
"bootfile=zImage\0" \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"console=ttyS0,115200\0" \
"optargs=\0" \
"mmcrootfstype=ext2 rootwait\0" \
"finduuid=part uuid mmc ${rootpart} uuid\0" \
"boot_fit=0\0" \
NANDARGS \
BOOTENV
/* Clock Macros */
#define V_OSCK 25000000 /* Clock output from T2 */
#define V_SCLK V_OSCK
#define CONFIG_POWER_TPS65910
#ifdef CONFIG_MTD_RAW_NAND
/* NAND: device related configs */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
CONFIG_SYS_NAND_PAGE_SIZE)
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
/* NAND: driver related configs */
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
26, 27, 28, 29, 30, 31, 32, 33, \
34, 35, 36, 37, 38, 39, 40, 41, \
42, 43, 44, 45, 46, 47, 48, 49, \
50, 51, 52, 53, 54, 55, 56, 57, }
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
/* NAND: SPL related configs */
#ifdef CONFIG_SPL_OS_BOOT
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
#endif
#endif /* !CONFIG_MTD_RAW_NAND */
/* CPU */
#ifdef CONFIG_SPI_BOOT
#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
#elif defined(CONFIG_ENV_IS_IN_NAND)
#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
#endif
#endif /* ! __CONFIG_PHYCORE_AM335x_R2_H */