mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-06 02:53:37 +08:00
466a9ea2a1
Initial commit of Librem5 u-boot and SPL Signed-off-by: Angus Ainslie <angus@akkea.ca> Co-developed-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Reviewed-by: Fabio Estevam <festevam@denx.de>
426 lines
9.3 KiB
C
426 lines
9.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2018 NXP
|
|
* Copyright 2021 Purism
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <errno.h>
|
|
#include <asm/io.h>
|
|
#include <miiphy.h>
|
|
#include <asm/mach-imx/iomux-v3.h>
|
|
#include <asm-generic/gpio.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <mmc.h>
|
|
#include <asm/arch/imx8mq_pins.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/mach-imx/gpio.h>
|
|
#include <asm/mach-imx/mxc_i2c.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/mach-imx/video.h>
|
|
#include <fuse.h>
|
|
#include <i2c.h>
|
|
#include <spl.h>
|
|
#include <usb.h>
|
|
#include <dwc3-uboot.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/bitfield.h>
|
|
#include <power/regulator.h>
|
|
#include <usb/xhci.h>
|
|
#include "librem5.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_LOAD_ENV_FROM_MMC_BOOT_PARTITION)
|
|
uint board_mmc_get_env_part(struct mmc *mmc)
|
|
{
|
|
uint part = (mmc->part_config >> 3) & PART_ACCESS_MASK;
|
|
|
|
if (part == 7)
|
|
part = 0;
|
|
return part;
|
|
}
|
|
#endif
|
|
|
|
int tps65982_wait_for_app(int timeout, int timeout_step)
|
|
{
|
|
int ret;
|
|
char response[6];
|
|
struct udevice *udev, *bus;
|
|
|
|
log_debug("%s: starting\n", __func__);
|
|
|
|
/* Set the i2c bus */
|
|
ret = uclass_get_device_by_seq(UCLASS_I2C, 0, &bus);
|
|
if (ret) {
|
|
log_err("%s: No bus %d\n", __func__, 0);
|
|
return 1;
|
|
}
|
|
|
|
ret = i2c_get_chip(bus, 0x3f, 1, &udev);
|
|
if (ret) {
|
|
log_err("%s: setting chip offset failed %d\n", __func__, ret);
|
|
return 1;
|
|
}
|
|
|
|
while (timeout > 0) {
|
|
ret = dm_i2c_read(udev, 0x03, (u8 *)response, 5);
|
|
log_debug("tps65982 mode %s\n", response);
|
|
if (response[1] == 'A')
|
|
return 0;
|
|
mdelay(timeout_step);
|
|
timeout -= timeout_step;
|
|
log_debug("tps65982 waited %d ms %c\n", timeout_step, response[1]);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
int tps65982_clear_dead_battery(void)
|
|
{
|
|
int ret;
|
|
char cmd[5] = "\04DBfg";
|
|
struct udevice *udev, *bus;
|
|
|
|
log_debug("%s: starting\n", __func__);
|
|
|
|
/* Set the i2c bus */
|
|
ret = uclass_get_device_by_seq(UCLASS_I2C, 0, &bus);
|
|
if (ret) {
|
|
log_err("%s: No bus %d\n", __func__, 0);
|
|
return 1;
|
|
}
|
|
|
|
ret = i2c_get_chip(bus, 0x3f, 1, &udev);
|
|
if (ret) {
|
|
log_err("%s: setting chip offset failed %d\n", __func__, ret);
|
|
return 1;
|
|
}
|
|
|
|
/* clearing the dead battery flag when not in dead battery condition
|
|
* is a no-op, so there's no need to check if it's in effect
|
|
*/
|
|
ret = dm_i2c_write(udev, 0x08, cmd, 5);
|
|
if (ret) {
|
|
log_err("%s: writing 4CC command failed %d", __func__, ret);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define TPS_POWER_STATUS_PWROPMODE(x) FIELD_GET(GENMASK(3, 2), x)
|
|
|
|
#define TPS_PDO_CONTRACT_TYPE(x) FIELD_GET(GENMASK(31, 30), x)
|
|
#define TPS_PDO_CONTRACT_FIXED 0
|
|
#define TPS_PDO_CONTRACT_BATTERY 1
|
|
#define TPS_PDO_CONTRACT_VARIABLE 2
|
|
|
|
#define TPS_TYPEC_PWR_MODE_USB 0
|
|
#define TPS_TYPEC_PWR_MODE_1_5A 1
|
|
#define TPS_TYPEC_PWR_MODE_3_0A 2
|
|
#define TPS_TYPEC_PWR_MODE_PD 3
|
|
|
|
#define TPS_PDO_FIXED_CONTRACT_MAX_CURRENT(x) (FIELD_GET(GENMASK(9, 0), x) * 10)
|
|
#define TPS_PDO_VAR_CONTRACT_MAX_CURRENT(x) (FIELD_GET(GENMASK(9, 0), x) * 10)
|
|
#define TPS_PDO_BAT_CONTRACT_MAX_VOLTAGE(x) (FIELD_GET(GENMASK(29, 20), x) * 50)
|
|
#define TPS_PDO_BAT_CONTRACT_MAX_POWER(x) (FIELD_GET(GENMASK(9, 0), x) * 250)
|
|
|
|
int tps65982_get_max_current(void)
|
|
{
|
|
int ret;
|
|
u8 buf[7];
|
|
u8 pwr_status;
|
|
u32 contract;
|
|
int type, mode;
|
|
struct udevice *udev, *bus;
|
|
|
|
log_debug("%s: starting\n", __func__);
|
|
|
|
/* Set the i2c bus */
|
|
ret = uclass_get_device_by_seq(UCLASS_I2C, 0, &bus);
|
|
if (ret) {
|
|
log_debug("%s: No bus %d\n", __func__, 0);
|
|
return -1;
|
|
}
|
|
|
|
ret = i2c_get_chip(bus, 0x3f, 1, &udev);
|
|
if (ret) {
|
|
log_debug("%s: setting chip offset failed %d\n", __func__, ret);
|
|
return -1;
|
|
}
|
|
|
|
ret = dm_i2c_read(udev, 0x3f, buf, 3);
|
|
if (ret) {
|
|
log_debug("%s: reading pwr_status failed %d\n", __func__, ret);
|
|
return -1;
|
|
}
|
|
|
|
pwr_status = buf[1];
|
|
|
|
if (!(pwr_status & 1))
|
|
return 0;
|
|
|
|
mode = TPS_POWER_STATUS_PWROPMODE(pwr_status);
|
|
switch (mode) {
|
|
case TPS_TYPEC_PWR_MODE_1_5A:
|
|
return 1500;
|
|
case TPS_TYPEC_PWR_MODE_3_0A:
|
|
return 3000;
|
|
case TPS_TYPEC_PWR_MODE_PD:
|
|
ret = dm_i2c_read(udev, 0x34, buf, 7);
|
|
if (ret) {
|
|
log_debug("%s: reading active contract failed %d\n", __func__, ret);
|
|
return -1;
|
|
}
|
|
|
|
contract = buf[1] + (buf[2] << 8) + (buf[3] << 16) + (buf[4] << 24);
|
|
|
|
type = TPS_PDO_CONTRACT_TYPE(contract);
|
|
|
|
switch (type) {
|
|
case TPS_PDO_CONTRACT_FIXED:
|
|
return TPS_PDO_FIXED_CONTRACT_MAX_CURRENT(contract);
|
|
case TPS_PDO_CONTRACT_BATTERY:
|
|
return 1000 * TPS_PDO_BAT_CONTRACT_MAX_POWER(contract)
|
|
/ TPS_PDO_BAT_CONTRACT_MAX_VOLTAGE(contract);
|
|
case TPS_PDO_CONTRACT_VARIABLE:
|
|
return TPS_PDO_VAR_CONTRACT_MAX_CURRENT(contract);
|
|
default:
|
|
log_debug("Unknown contract type: %d\n", type);
|
|
return -1;
|
|
}
|
|
case TPS_TYPEC_PWR_MODE_USB:
|
|
return 500;
|
|
default:
|
|
log_debug("Unknown power mode: %d\n", mode);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
int init_tps65982(void)
|
|
{
|
|
log_debug("%s: starting\n", __func__);
|
|
|
|
if (tps65982_wait_for_app(500, 100)) {
|
|
log_err("tps65982 APP boot failed\n");
|
|
return 1;
|
|
}
|
|
|
|
log_info("tps65982 boot successful\n");
|
|
return 0;
|
|
}
|
|
|
|
int bq25895_set_iinlim(int current)
|
|
{
|
|
u8 val, iinlim;
|
|
int ret;
|
|
struct udevice *udev, *bus;
|
|
|
|
/* Set the i2c bus */
|
|
ret = uclass_get_device_by_seq(UCLASS_I2C, 3, &bus);
|
|
if (ret) {
|
|
log_err("%s: No bus 3\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_get_chip(bus, 0x6a, 1, &udev);
|
|
if (ret) {
|
|
log_err("%s: setting chip offset failed %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
if (current > 3250)
|
|
current = 3250;
|
|
if (current < 100)
|
|
current = 100;
|
|
|
|
val = dm_i2c_reg_read(udev, 0x00);
|
|
iinlim = ((current - 100) / 50) & 0x3f;
|
|
val = (val & 0xc0) | iinlim;
|
|
dm_i2c_reg_write(udev, 0x00, val);
|
|
log_debug("REG00 0x%x\n", val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
bool bq25895_battery_present(void)
|
|
{
|
|
u8 val;
|
|
int ret;
|
|
struct udevice *udev, *bus;
|
|
|
|
/* Set the i2c bus */
|
|
ret = uclass_get_device_by_seq(UCLASS_I2C, 3, &bus);
|
|
if (ret) {
|
|
log_err("%s: No bus 3\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_get_chip(bus, 0x6a, 1, &udev);
|
|
if (ret) {
|
|
log_err("%s: setting chip offset failed %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* note that this may return false negatives when there's
|
|
* no external power applied and the battery voltage is below
|
|
* Vsys. this isn't a problem when used for clearing the dead
|
|
* battery flag though, since it's certain that there's an external
|
|
* power applied in this case
|
|
*/
|
|
val = dm_i2c_reg_read(udev, 0x0e) & 0x7f;
|
|
if (val == 0x00 || val == 0x7f)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* set some safe defaults for the battery charger
|
|
*/
|
|
int init_charger_bq25895(void)
|
|
{
|
|
u8 val;
|
|
int iinlim, ret;
|
|
struct udevice *udev, *bus;
|
|
|
|
/* Set the i2c bus */
|
|
ret = uclass_get_device_by_seq(UCLASS_I2C, 3, &bus);
|
|
if (ret) {
|
|
log_debug("%s: No bus 3\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_get_chip(bus, 0x6a, 1, &udev);
|
|
if (ret) {
|
|
log_debug("%s: setting chip offset failed %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
val = dm_i2c_reg_read(udev, 0x0b);
|
|
log_debug("REG0B 0x%x\n", val);
|
|
|
|
log_debug("VBUS_STAT 0x%x\n", val >> 5);
|
|
switch (val >> 5) {
|
|
case 0:
|
|
log_debug("VBUS not detected\n");
|
|
break;
|
|
case 1:
|
|
log_debug("USB SDP IINLIM 500mA\n");
|
|
break;
|
|
case 2:
|
|
log_debug("USB CDP IINLIM 1500mA\n");
|
|
break;
|
|
case 3:
|
|
log_debug("USB DCP IINLIM 3500mA\n");
|
|
break;
|
|
case 4:
|
|
log_debug("MAXCHARGE IINLIM 1500mA\n");
|
|
break;
|
|
case 5:
|
|
log_debug("Unknown IINLIM 500mA\n");
|
|
break;
|
|
case 6:
|
|
log_debug("DIVIDER IINLIM > 1000mA\n");
|
|
break;
|
|
case 7:
|
|
log_debug("OTG\n");
|
|
break;
|
|
};
|
|
|
|
log_debug("CHRG_STAT 0x%x\n", (val >> 3) & 0x3);
|
|
log_debug("PG_STAT 0x%x\n", (val >> 2) & 1);
|
|
log_debug("SDP_STAT 0x%x\n", (val >> 1) & 1);
|
|
log_debug("VSYS_STAT 0x%x\n", val & 1);
|
|
|
|
val = dm_i2c_reg_read(udev, 0x00);
|
|
log_debug("REG00 0x%x\n", val);
|
|
iinlim = 100 + (val & 0x3f) * 50;
|
|
log_debug("IINLIM %d mA\n", iinlim);
|
|
log_debug("EN_HIZ 0x%x\n", (val >> 7) & 1);
|
|
log_debug("EN_ILIM 0x%x\n", (val >> 6) & 1);
|
|
|
|
/* set 1.6A charge limit */
|
|
dm_i2c_reg_write(udev, 0x04, 0x19);
|
|
|
|
/* re-enable charger */
|
|
val = dm_i2c_reg_read(udev, 0x03);
|
|
val = val | 0x10;
|
|
dm_i2c_reg_write(udev, 0x03, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
struct udevice *dev;
|
|
int tps_ret;
|
|
|
|
if (IS_ENABLED(CONFIG_USB_DWC3) || IS_ENABLED(CONFIG_USB_XHCI_IMX8M)) {
|
|
log_debug("%s: initializing USB clk\n", __func__);
|
|
|
|
/* init_usb_clk won't enable the second clock if it's a USB boot */
|
|
if (is_usb_boot()) {
|
|
clock_enable(CCGR_USB_CTRL2, 1);
|
|
clock_enable(CCGR_USB_PHY2, 1);
|
|
}
|
|
|
|
printf("Enabling regulator-hub\n");
|
|
if (!regulator_get_by_devname("regulator-hub", &dev)) {
|
|
if (regulator_set_enable(dev, true))
|
|
pr_err("Failed to enable regulator-hub\n");
|
|
}
|
|
}
|
|
|
|
tps_ret = init_tps65982();
|
|
init_charger_bq25895();
|
|
|
|
if (!tps_ret) {
|
|
int current = tps65982_get_max_current();
|
|
|
|
if (current > 500)
|
|
bq25895_set_iinlim(current);
|
|
|
|
if (bq25895_battery_present())
|
|
tps65982_clear_dead_battery();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
if (IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)) {
|
|
u32 rev;
|
|
char rev_str[3];
|
|
|
|
env_set("board_name", "librem5");
|
|
if (fuse_read(9, 0, &rev)) {
|
|
env_set("board_rev", BOARD_REV_ERROR);
|
|
} else if (rev == 0) {
|
|
env_set("board_rev", BOARD_REV_UNKNOWN);
|
|
} else if (rev > 0) {
|
|
sprintf(rev_str, "%u", rev);
|
|
env_set("board_rev", rev_str);
|
|
}
|
|
|
|
printf("Board name: %s\n", env_get("board_name"));
|
|
printf("Board rev: %s\n", env_get("board_rev"));
|
|
}
|
|
|
|
if (is_usb_boot()) {
|
|
puts("USB Boot\n");
|
|
env_set("bootcmd", "fastboot 0");
|
|
}
|
|
|
|
return 0;
|
|
}
|