u-boot/configs/imx6q_bosch_acc_defconfig
Jerome Forissier 8cb330355b net: introduce alternative implementation as net/lwip/
Prepare the introduction of the lwIP (lightweight IP) TCP/IP stack by
adding a new net/lwip/ directory and the NET_LWIP symbol. Network
support is either NO_NET, NET (legacy stack) or NET_LWIP. Subsequent
commits will introduce the lwIP code, re-work the NETDEVICE integration
and port some of the NET commands and features to lwIP.

SPL_NET cannot be enabled when NET_LWIP=y. SPL_NET pulls some symbols
that are part of NET (such as arp_init(), arp_timeout_check(),
arp_receive(), net_arp_wait_packet_ip()). lwIP support in SPL may be
added later.

Similarly, DFU_TFTP and FASTBOOT are not compatible with NET_LWIP
because of dependencies on net_loop(), tftp_timeout_ms,
tftp_timeout_count_max and other NET things. Let's add a dependency on
!NET_LWIP for now.

SANDBOX can select NET_LWIP but doing so will currently disable the eth
dm tests as well as the wget tests which have strong dependencies on the
NET code.

Other adjustments to Kconfig files are made to fix "unmet direct
dependencies detected" for USB_FUNCTION_SDP and CMD_FASTBOOT when
the default networking stack is set to NET_LWIP ("default NET_LWIP"
instead of "default NET" in Kconfig).

The networking stack is now a choice between NO_NET,
NET and NET_LWIP. Therefore '# CONFIG_NET is not set' should be
'CONFIG_NO_NET=y'. Adjust the defconfigs accordingly.

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2024-10-16 11:11:56 -06:00

104 lines
2.7 KiB
Plaintext

CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_TEXT_BASE=0x17780000
CONFIG_SYS_MALLOC_LEN=0x01000000
CONFIG_SYS_MALLOC_F_LEN=0x9000
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x1000
CONFIG_ENV_OFFSET=0x1fe000
CONFIG_MX6QDL=y
CONFIG_MX6_DDRCAL=y
CONFIG_TARGET_MX6Q_ACC=y
CONFIG_DEFAULT_DEVICE_TREE="imx6q-bosch-acc"
CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SYS_MONITOR_LEN=409600
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_BOOTCOUNT_BOOTLIMIT=8
CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
CONFIG_SPL_SIZE_LIMIT=69632
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x1ff000
CONFIG_IMX_HAB=y
# CONFIG_CMD_BMODE is not set
# CONFIG_CMD_DEKBLOB is not set
CONFIG_BUILD_TARGET=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_EFI_LOADER is not set
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run mmc_mmc_fit"
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_RAW_IMAGE_SUPPORT=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xaa
# CONFIG_SPL_CRYPTO is not set
CONFIG_SPL_WATCHDOG=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_FDT is not set
# CONFIG_CMD_GO is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_CRC32 is not set
# CONFIG_CMD_MEMORY is not set
# CONFIG_CMD_FUSE is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
# CONFIG_CMD_PINMUX is not set
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_BLOCK_CACHE is not set
# CONFIG_CMD_SLEEP is not set
# CONFIG_CMD_MP is not set
# CONFIG_CMD_HASH is not set
CONFIG_CMD_EXT4=y
CONFIG_DOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_MULTI_DTB_FIT=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt-parent"
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_MMC_ENV_PART=1
CONFIG_ENV_WRITEABLE_LIST=y
CONFIG_ENV_ACCESS_IGNORE_FORCE=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NO_NET=y
CONFIG_SPL_DM=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_DM_BOOTCOUNT=y
CONFIG_DM_BOOTCOUNT_PMIC_PFUZE100=y
CONFIG_SYS_I2C_MXC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_PFUZE100=y
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
CONFIG_IMX_WATCHDOG=y
CONFIG_WDT=y
CONFIG_EXT4_WRITE=y
CONFIG_FS_FAT=y
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y