u-boot/configs/amd_versal2_mini_qspi_defconfig
Jerome Forissier 8cb330355b net: introduce alternative implementation as net/lwip/
Prepare the introduction of the lwIP (lightweight IP) TCP/IP stack by
adding a new net/lwip/ directory and the NET_LWIP symbol. Network
support is either NO_NET, NET (legacy stack) or NET_LWIP. Subsequent
commits will introduce the lwIP code, re-work the NETDEVICE integration
and port some of the NET commands and features to lwIP.

SPL_NET cannot be enabled when NET_LWIP=y. SPL_NET pulls some symbols
that are part of NET (such as arp_init(), arp_timeout_check(),
arp_receive(), net_arp_wait_packet_ip()). lwIP support in SPL may be
added later.

Similarly, DFU_TFTP and FASTBOOT are not compatible with NET_LWIP
because of dependencies on net_loop(), tftp_timeout_ms,
tftp_timeout_count_max and other NET things. Let's add a dependency on
!NET_LWIP for now.

SANDBOX can select NET_LWIP but doing so will currently disable the eth
dm tests as well as the wget tests which have strong dependencies on the
NET code.

Other adjustments to Kconfig files are made to fix "unmet direct
dependencies detected" for USB_FUNCTION_SDP and CMD_FASTBOOT when
the default networking stack is set to NET_LWIP ("default NET_LWIP"
instead of "default NET" in Kconfig).

The networking stack is now a choice between NO_NET,
NET and NET_LWIP. Therefore '# CONFIG_NET is not set' should be
'CONFIG_NO_NET=y'. Adjust the defconfigs accordingly.

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2024-10-16 11:11:56 -06:00

80 lines
2.3 KiB
Plaintext

CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="amd_versal2_mini"
# CONFIG_ARM64_CRC32 is not set
CONFIG_COUNTER_FREQUENCY=100000000
# CONFIG_ARM64_SUPPORT_AARCH32 is not set
CONFIG_ARCH_VERSAL2=y
CONFIG_TEXT_BASE=0xBBF00000
CONFIG_SYS_MALLOC_LEN=0x20000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=3
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xBBF20000
CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-mini"
CONFIG_SYS_LOAD_ADDR=0xBBF80000
CONFIG_DEBUG_UART_BASE=0xf1920000
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
# CONFIG_PSCI_RESET is not set
CONFIG_DEBUG_UART=y
# CONFIG_EXPERT is not set
CONFIG_REMAKE_ELF=y
# CONFIG_LEGACY_IMAGE_FORMAT is not set
# CONFIG_AUTOBOOT is not set
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_BOARD_LATE_INIT is not set
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set
# CONFIG_SYS_LONGHELP is not set
CONFIG_SYS_PROMPT="versal2> "
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_BOOTI is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_FDT is not set
# CONFIG_CMD_GO is not set
# CONFIG_CMD_RUN is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_SAVEENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_CRC32 is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
# CONFIG_CMD_SLEEP is not set
CONFIG_OF_EMBED=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NO_NET=y
# CONFIG_DM_DEVICE_REMOVE is not set
# CONFIG_GPIO is not set
# CONFIG_I2C is not set
# CONFIG_INPUT is not set
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
# CONFIG_SPI_FLASH_LOCK is not set
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
# CONFIG_POWER is not set
CONFIG_DEBUG_UART_PL011=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_ARM_DCC=y
CONFIG_PL01X_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_ZYNQMP_GQSPI=y
# CONFIG_GZIP is not set