mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-14 07:13:28 +08:00
eb9124f574
Make first step in DT/DM migration. Enable OF_CONTROL only for the main U-Boot image for now. Remove mmc_init_main() because board_mmc_init() is not called when DM_MMC is enabled. DM_MMC requires DM_GPIO for card-detect to work. That in turn makes gpio request mandatory. Add code to request/free gpios in platform code. MMC devices are now numbered according to DT. The SD card is 1, and eMMC is 2. Account for that in board_mmc_get_env_dev(), BOOT_TARGET_DEVICES, and has_emmc(). DM_MMC requires BLK. However, the (BLK && !DM_USB) combination disables USB_STORAGE. Enable DM_USB to preserve USB functionality. Add also DM_REGULATORS for the USB power controller. This allows us to drop board_ehci_hcd_init() and setup_usb(). Runtime selection of DT is necessary because of the i.MX6QD vs i.MX6SDL incompatibility. DT selection does not rely on GPIOs, since DM_GPIO depends on DT. Instead, we take one "fully featured" DT of each variant. That should be enough to boot from both SD card and eMMC. Since we don't select the exact DT, override the generic show_board_info() that shows the selected DT 'model' field. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <festevam@gmail.com>
134 lines
3.8 KiB
C
134 lines
3.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* Configuration settings for the SolidRun mx6 based boards
|
|
*/
|
|
#ifndef __MX6CUBOXI_CONFIG_H
|
|
#define __MX6CUBOXI_CONFIG_H
|
|
|
|
#include "mx6_common.h"
|
|
|
|
#include "imx6_spl.h"
|
|
|
|
#define CONFIG_IMX_THERMAL
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
|
|
#define CONFIG_MXC_UART
|
|
|
|
/* MMC Configs */
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
|
|
|
|
/* SATA Configuration */
|
|
#ifdef CONFIG_CMD_SATA
|
|
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
|
#define CONFIG_DWC_AHSATA_PORT_ID 0
|
|
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
|
|
#define CONFIG_LBA48
|
|
#endif
|
|
|
|
/* Ethernet Configuration */
|
|
#define CONFIG_FEC_MXC
|
|
#define IMX_FEC_BASE ENET_BASE_ADDR
|
|
#define CONFIG_FEC_XCV_TYPE RGMII
|
|
#define CONFIG_FEC_MXC_PHYADDR 0
|
|
#define CONFIG_PHY_ATHEROS
|
|
|
|
/* Framebuffer */
|
|
#define CONFIG_VIDEO_BMP_RLE8
|
|
#define CONFIG_SPLASH_SCREEN
|
|
#define CONFIG_SPLASH_SCREEN_ALIGN
|
|
#define CONFIG_BMP_16BPP
|
|
#define CONFIG_VIDEO_LOGO
|
|
#define CONFIG_VIDEO_BMP_LOGO
|
|
#define CONFIG_IMX_HDMI
|
|
#define CONFIG_IMX_VIDEO_SKIP
|
|
|
|
/* USB */
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
|
|
/* Command definition */
|
|
|
|
#define CONFIG_MXC_UART_BASE UART1_BASE
|
|
#define CONSOLE_DEV "ttymxc0"
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0 /* SDHC2 */
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"som_rev=undefined\0" \
|
|
"has_emmc=undefined\0" \
|
|
"fdtfile=undefined\0" \
|
|
"fdt_addr_r=0x18000000\0" \
|
|
"fdt_addr=0x18000000\0" \
|
|
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
|
|
"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
|
|
"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
|
|
"ramdisk_addr_r=0x13000000\0" \
|
|
"ramdiskaddr=0x13000000\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"ip_dyn=yes\0" \
|
|
"console=" CONSOLE_DEV ",115200\0" \
|
|
"bootm_size=0x10000000\0" \
|
|
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
|
|
"finduuid=part uuid mmc 0:1 uuid\0" \
|
|
"update_sd_firmware=" \
|
|
"if test ${ip_dyn} = yes; then " \
|
|
"setenv get_cmd dhcp; " \
|
|
"else " \
|
|
"setenv get_cmd tftp; " \
|
|
"fi; " \
|
|
"if mmc dev ${mmcdev}; then " \
|
|
"if ${get_cmd} ${update_sd_firmware_filename}; then " \
|
|
"setexpr fw_sz ${filesize} / 0x200; " \
|
|
"setexpr fw_sz ${fw_sz} + 1; " \
|
|
"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
|
|
"fi; " \
|
|
"fi\0" \
|
|
"findfdt="\
|
|
"if test ${board_rev} = MX6Q; then " \
|
|
"setenv fdtprefix imx6q; fi; " \
|
|
"if test ${board_rev} = MX6DL; then " \
|
|
"setenv fdtprefix imx6dl; fi; " \
|
|
"if test ${som_rev} = V15; then " \
|
|
"setenv fdtsuffix -som-v15; fi; " \
|
|
"if test ${has_emmc} = yes; then " \
|
|
"setenv emmcsuffix -emmc; fi; " \
|
|
"if test ${board_name} = HUMMINGBOARD2 ; then " \
|
|
"setenv fdtfile ${fdtprefix}-hummingboard2${emmcsuffix}${fdtsuffix}.dtb; fi; " \
|
|
"if test ${board_name} = HUMMINGBOARD ; then " \
|
|
"setenv fdtfile ${fdtprefix}-hummingboard${emmcsuffix}${fdtsuffix}.dtb; fi; " \
|
|
"if test ${board_name} = CUBOXI ; then " \
|
|
"setenv fdtfile ${fdtprefix}-cubox-i${emmcsuffix}${fdtsuffix}.dtb; fi; " \
|
|
"if test ${fdtfile} = undefined; then " \
|
|
"echo WARNING: Could not determine dtb to use; fi; \0" \
|
|
BOOTENV
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 1) \
|
|
func(MMC, mmc, 2) \
|
|
func(SATA, sata, 0) \
|
|
func(USB, usb, 0) \
|
|
func(PXE, pxe, na) \
|
|
func(DHCP, dhcp, na)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
#else
|
|
#define CONFIG_EXTRA_ENV_SETTINGS
|
|
#endif /* CONFIG_SPL_BUILD */
|
|
|
|
/* Physical Memory Map */
|
|
#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* Environment organization */
|
|
|
|
#endif /* __MX6CUBOXI_CONFIG_H */
|