mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-28 15:13:31 +08:00
0fc4744412
No need for our custom implementations now that common code supports the generic gpio layer. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
258 lines
6.2 KiB
C
258 lines
6.2 KiB
C
#include <common.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <post.h>
|
|
#include <watchdog.h>
|
|
|
|
#if CONFIG_POST & CONFIG_SYS_POST_MEMORY
|
|
#define CLKIN 25000000
|
|
#define PATTERN1 0x5A5A5A5A
|
|
#define PATTERN2 0xAAAAAAAA
|
|
|
|
#define CCLK_NUM 4
|
|
#define SCLK_NUM 3
|
|
|
|
void post_out_buff(char *buff);
|
|
void post_init_pll(int mult, int div);
|
|
int post_init_sdram(int sclk);
|
|
void post_init_uart(int sclk);
|
|
|
|
const int pll[CCLK_NUM][SCLK_NUM][2] = {
|
|
{ {20, 4}, {20, 5}, {20, 10} }, /* CCLK = 500M */
|
|
{ {16, 4}, {16, 5}, {16, 8} }, /* CCLK = 400M */
|
|
{ {8, 2}, {8, 4}, {8, 5} }, /* CCLK = 200M */
|
|
{ {4, 1}, {4, 2}, {4, 4} } /* CCLK = 100M */
|
|
};
|
|
const char *const log[CCLK_NUM][SCLK_NUM] = {
|
|
{"CCLK-500MHz SCLK-125MHz: Writing...\0",
|
|
"CCLK-500MHz SCLK-100MHz: Writing...\0",
|
|
"CCLK-500MHz SCLK- 50MHz: Writing...\0",},
|
|
{"CCLK-400MHz SCLK-100MHz: Writing...\0",
|
|
"CCLK-400MHz SCLK- 80MHz: Writing...\0",
|
|
"CCLK-400MHz SCLK- 50MHz: Writing...\0",},
|
|
{"CCLK-200MHz SCLK-100MHz: Writing...\0",
|
|
"CCLK-200MHz SCLK- 50MHz: Writing...\0",
|
|
"CCLK-200MHz SCLK- 40MHz: Writing...\0",},
|
|
{"CCLK-100MHz SCLK-100MHz: Writing...\0",
|
|
"CCLK-100MHz SCLK- 50MHz: Writing...\0",
|
|
"CCLK-100MHz SCLK- 25MHz: Writing...\0",},
|
|
};
|
|
|
|
int memory_post_test(int flags)
|
|
{
|
|
int addr;
|
|
int m, n;
|
|
int sclk, sclk_temp;
|
|
int ret = 1;
|
|
|
|
sclk_temp = CLKIN / 1000000;
|
|
sclk_temp = sclk_temp * CONFIG_VCO_MULT;
|
|
for (sclk = 0; sclk_temp > 0; sclk++)
|
|
sclk_temp -= CONFIG_SCLK_DIV;
|
|
sclk = sclk * 1000000;
|
|
post_init_uart(sclk);
|
|
if (post_hotkeys_pressed() == 0)
|
|
return 0;
|
|
|
|
for (m = 0; m < CCLK_NUM; m++) {
|
|
for (n = 0; n < SCLK_NUM; n++) {
|
|
/* Calculate the sclk */
|
|
sclk_temp = CLKIN / 1000000;
|
|
sclk_temp = sclk_temp * pll[m][n][0];
|
|
for (sclk = 0; sclk_temp > 0; sclk++)
|
|
sclk_temp -= pll[m][n][1];
|
|
sclk = sclk * 1000000;
|
|
|
|
post_init_pll(pll[m][n][0], pll[m][n][1]);
|
|
post_init_sdram(sclk);
|
|
post_init_uart(sclk);
|
|
post_out_buff("\n\r\0");
|
|
post_out_buff(log[m][n]);
|
|
for (addr = 0x0; addr < CONFIG_SYS_MAX_RAM_SIZE; addr += 4)
|
|
*(unsigned long *)addr = PATTERN1;
|
|
post_out_buff("Reading...\0");
|
|
for (addr = 0x0; addr < CONFIG_SYS_MAX_RAM_SIZE; addr += 4) {
|
|
if ((*(unsigned long *)addr) != PATTERN1) {
|
|
post_out_buff("Error\n\r\0");
|
|
ret = 0;
|
|
}
|
|
}
|
|
post_out_buff("OK\n\r\0");
|
|
}
|
|
}
|
|
if (ret)
|
|
post_out_buff("memory POST passed\n\r\0");
|
|
else
|
|
post_out_buff("memory POST failed\n\r\0");
|
|
|
|
post_out_buff("\n\r\n\r\0");
|
|
return 1;
|
|
}
|
|
|
|
void post_init_uart(int sclk)
|
|
{
|
|
int divisor;
|
|
|
|
for (divisor = 0; sclk > 0; divisor++)
|
|
sclk -= 57600 * 16;
|
|
|
|
bfin_write_PORTF_FER(0x000F);
|
|
bfin_write_PORTH_FER(0xFFFF);
|
|
|
|
bfin_write_UART_GCTL(0x00);
|
|
bfin_write_UART_LCR(0x83);
|
|
SSYNC();
|
|
bfin_write_UART_DLL(divisor & 0xFF);
|
|
SSYNC();
|
|
bfin_write_UART_DLH((divisor >> 8) & 0xFF);
|
|
SSYNC();
|
|
bfin_write_UART_LCR(0x03);
|
|
SSYNC();
|
|
bfin_write_UART_GCTL(0x01);
|
|
SSYNC();
|
|
}
|
|
|
|
void post_out_buff(char *buff)
|
|
{
|
|
|
|
int i = 0;
|
|
for (i = 0; i < 0x80000; i++)
|
|
;
|
|
i = 0;
|
|
while ((buff[i] != '\0') && (i != 100)) {
|
|
while (!(bfin_read_pUART_LSR() & 0x20)) ;
|
|
bfin_write_UART_THR(buff[i]);
|
|
SSYNC();
|
|
i++;
|
|
}
|
|
for (i = 0; i < 0x80000; i++)
|
|
;
|
|
}
|
|
|
|
void post_init_pll(int mult, int div)
|
|
{
|
|
|
|
bfin_write_SIC_IWR(0x01);
|
|
bfin_write_PLL_CTL((mult << 9));
|
|
bfin_write_PLL_DIV(div);
|
|
asm("CLI R2;");
|
|
asm("IDLE;");
|
|
asm("STI R2;");
|
|
while (!(bfin_read_PLL_STAT() & 0x20)) ;
|
|
}
|
|
|
|
int post_init_sdram(int sclk)
|
|
{
|
|
int SDRAM_tRP, SDRAM_tRP_num, SDRAM_tRAS, SDRAM_tRAS_num, SDRAM_tRCD,
|
|
SDRAM_tWR;
|
|
int SDRAM_Tref, SDRAM_NRA, SDRAM_CL, SDRAM_SIZE, SDRAM_WIDTH,
|
|
mem_SDGCTL, mem_SDBCTL, mem_SDRRC;
|
|
|
|
if ((sclk > 119402985)) {
|
|
SDRAM_tRP = TRP_2;
|
|
SDRAM_tRP_num = 2;
|
|
SDRAM_tRAS = TRAS_7;
|
|
SDRAM_tRAS_num = 7;
|
|
SDRAM_tRCD = TRCD_2;
|
|
SDRAM_tWR = TWR_2;
|
|
} else if ((sclk > 104477612) && (sclk <= 119402985)) {
|
|
SDRAM_tRP = TRP_2;
|
|
SDRAM_tRP_num = 2;
|
|
SDRAM_tRAS = TRAS_6;
|
|
SDRAM_tRAS_num = 6;
|
|
SDRAM_tRCD = TRCD_2;
|
|
SDRAM_tWR = TWR_2;
|
|
} else if ((sclk > 89552239) && (sclk <= 104477612)) {
|
|
SDRAM_tRP = TRP_2;
|
|
SDRAM_tRP_num = 2;
|
|
SDRAM_tRAS = TRAS_5;
|
|
SDRAM_tRAS_num = 5;
|
|
SDRAM_tRCD = TRCD_2;
|
|
SDRAM_tWR = TWR_2;
|
|
} else if ((sclk > 74626866) && (sclk <= 89552239)) {
|
|
SDRAM_tRP = TRP_2;
|
|
SDRAM_tRP_num = 2;
|
|
SDRAM_tRAS = TRAS_4;
|
|
SDRAM_tRAS_num = 4;
|
|
SDRAM_tRCD = TRCD_2;
|
|
SDRAM_tWR = TWR_2;
|
|
} else if ((sclk > 66666667) && (sclk <= 74626866)) {
|
|
SDRAM_tRP = TRP_2;
|
|
SDRAM_tRP_num = 2;
|
|
SDRAM_tRAS = TRAS_3;
|
|
SDRAM_tRAS_num = 3;
|
|
SDRAM_tRCD = TRCD_2;
|
|
SDRAM_tWR = TWR_2;
|
|
} else if ((sclk > 59701493) && (sclk <= 66666667)) {
|
|
SDRAM_tRP = TRP_1;
|
|
SDRAM_tRP_num = 1;
|
|
SDRAM_tRAS = TRAS_4;
|
|
SDRAM_tRAS_num = 4;
|
|
SDRAM_tRCD = TRCD_1;
|
|
SDRAM_tWR = TWR_2;
|
|
} else if ((sclk > 44776119) && (sclk <= 59701493)) {
|
|
SDRAM_tRP = TRP_1;
|
|
SDRAM_tRP_num = 1;
|
|
SDRAM_tRAS = TRAS_3;
|
|
SDRAM_tRAS_num = 3;
|
|
SDRAM_tRCD = TRCD_1;
|
|
SDRAM_tWR = TWR_2;
|
|
} else if ((sclk > 29850746) && (sclk <= 44776119)) {
|
|
SDRAM_tRP = TRP_1;
|
|
SDRAM_tRP_num = 1;
|
|
SDRAM_tRAS = TRAS_2;
|
|
SDRAM_tRAS_num = 2;
|
|
SDRAM_tRCD = TRCD_1;
|
|
SDRAM_tWR = TWR_2;
|
|
} else if (sclk <= 29850746) {
|
|
SDRAM_tRP = TRP_1;
|
|
SDRAM_tRP_num = 1;
|
|
SDRAM_tRAS = TRAS_1;
|
|
SDRAM_tRAS_num = 1;
|
|
SDRAM_tRCD = TRCD_1;
|
|
SDRAM_tWR = TWR_2;
|
|
} else {
|
|
SDRAM_tRP = TRP_1;
|
|
SDRAM_tRP_num = 1;
|
|
SDRAM_tRAS = TRAS_1;
|
|
SDRAM_tRAS_num = 1;
|
|
SDRAM_tRCD = TRCD_1;
|
|
SDRAM_tWR = TWR_2;
|
|
}
|
|
/*SDRAM INFORMATION: */
|
|
SDRAM_Tref = 64; /* Refresh period in milliseconds */
|
|
SDRAM_NRA = 4096; /* Number of row addresses in SDRAM */
|
|
SDRAM_CL = CL_3; /* 2 */
|
|
|
|
SDRAM_SIZE = EBSZ_64;
|
|
SDRAM_WIDTH = EBCAW_10;
|
|
|
|
mem_SDBCTL = SDRAM_WIDTH | SDRAM_SIZE | EBE;
|
|
|
|
/* Equation from section 17 (p17-46) of BF533 HRM */
|
|
mem_SDRRC =
|
|
(((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) -
|
|
(SDRAM_tRAS_num + SDRAM_tRP_num);
|
|
|
|
/* Enable SCLK Out */
|
|
mem_SDGCTL =
|
|
(SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR
|
|
| PSS);
|
|
|
|
SSYNC();
|
|
|
|
bfin_write_EBIU_SDGCTL(bfin_write_EBIU_SDGCTL() | 0x1000000);
|
|
/* Set the SDRAM Refresh Rate control register based on SSCLK value */
|
|
bfin_write_EBIU_SDRRC(mem_SDRRC);
|
|
|
|
/* SDRAM Memory Bank Control Register */
|
|
bfin_write_EBIU_SDBCTL(mem_SDBCTL);
|
|
|
|
/* SDRAM Memory Global Control Register */
|
|
bfin_write_EBIU_SDGCTL(mem_SDGCTL);
|
|
SSYNC();
|
|
return mem_SDRRC;
|
|
}
|
|
|
|
#endif /* CONFIG_POST & CONFIG_SYS_POST_MEMORY */
|