mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-16 08:13:28 +08:00
9424ecd735
Add SPI controller driver implemented in Socionext UniPhier SoCs. This controller has the SPI master mode only. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
414 lines
10 KiB
C
414 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* uniphier_spi.c - Socionext UniPhier SPI driver
|
|
* Copyright 2019 Socionext, Inc.
|
|
*/
|
|
|
|
#include <clk.h>
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/io.h>
|
|
#include <spi.h>
|
|
#include <wait_bit.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define SSI_CTL 0x00
|
|
#define SSI_CTL_EN BIT(0)
|
|
|
|
#define SSI_CKS 0x04
|
|
#define SSI_CKS_CKRAT_MASK GENMASK(7, 0)
|
|
#define SSI_CKS_CKPHS BIT(14)
|
|
#define SSI_CKS_CKINIT BIT(13)
|
|
#define SSI_CKS_CKDLY BIT(12)
|
|
|
|
#define SSI_TXWDS 0x08
|
|
#define SSI_TXWDS_WDLEN_MASK GENMASK(13, 8)
|
|
#define SSI_TXWDS_TDTF_MASK GENMASK(7, 6)
|
|
#define SSI_TXWDS_DTLEN_MASK GENMASK(5, 0)
|
|
|
|
#define SSI_RXWDS 0x0c
|
|
#define SSI_RXWDS_RDTF_MASK GENMASK(7, 6)
|
|
#define SSI_RXWDS_DTLEN_MASK GENMASK(5, 0)
|
|
|
|
#define SSI_FPS 0x10
|
|
#define SSI_FPS_FSPOL BIT(15)
|
|
#define SSI_FPS_FSTRT BIT(14)
|
|
|
|
#define SSI_SR 0x14
|
|
#define SSI_SR_BUSY BIT(7)
|
|
#define SSI_SR_TNF BIT(5)
|
|
#define SSI_SR_RNE BIT(0)
|
|
|
|
#define SSI_IE 0x18
|
|
|
|
#define SSI_IC 0x1c
|
|
#define SSI_IC_TCIC BIT(4)
|
|
#define SSI_IC_RCIC BIT(3)
|
|
#define SSI_IC_RORIC BIT(0)
|
|
|
|
#define SSI_FC 0x20
|
|
#define SSI_FC_TXFFL BIT(12)
|
|
#define SSI_FC_TXFTH_MASK GENMASK(11, 8)
|
|
#define SSI_FC_RXFFL BIT(4)
|
|
#define SSI_FC_RXFTH_MASK GENMASK(3, 0)
|
|
|
|
#define SSI_XDR 0x24 /* TXDR for write, RXDR for read */
|
|
|
|
#define SSI_FIFO_DEPTH 8U
|
|
|
|
#define SSI_REG_TIMEOUT (CONFIG_SYS_HZ / 100) /* 10 ms */
|
|
#define SSI_XFER_TIMEOUT (CONFIG_SYS_HZ) /* 1 sec */
|
|
|
|
#define SSI_CLK 50000000 /* internal I/O clock: 50MHz */
|
|
|
|
struct uniphier_spi_platdata {
|
|
void __iomem *base;
|
|
u32 frequency; /* input frequency */
|
|
u32 speed_hz;
|
|
uint deactivate_delay_us; /* Delay to wait after deactivate */
|
|
uint activate_delay_us; /* Delay to wait after activate */
|
|
};
|
|
|
|
struct uniphier_spi_priv {
|
|
void __iomem *base;
|
|
u8 mode;
|
|
u8 fifo_depth;
|
|
u8 bits_per_word;
|
|
ulong last_transaction_us; /* Time of last transaction end */
|
|
};
|
|
|
|
static void uniphier_spi_enable(struct uniphier_spi_priv *priv, int enable)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(priv->base + SSI_CTL);
|
|
if (enable)
|
|
val |= SSI_CTL_EN;
|
|
else
|
|
val &= ~SSI_CTL_EN;
|
|
writel(val, priv->base + SSI_CTL);
|
|
}
|
|
|
|
static void uniphier_spi_regdump(struct uniphier_spi_priv *priv)
|
|
{
|
|
pr_debug("CTL %08x\n", readl(priv->base + SSI_CTL));
|
|
pr_debug("CKS %08x\n", readl(priv->base + SSI_CKS));
|
|
pr_debug("TXWDS %08x\n", readl(priv->base + SSI_TXWDS));
|
|
pr_debug("RXWDS %08x\n", readl(priv->base + SSI_RXWDS));
|
|
pr_debug("FPS %08x\n", readl(priv->base + SSI_FPS));
|
|
pr_debug("SR %08x\n", readl(priv->base + SSI_SR));
|
|
pr_debug("IE %08x\n", readl(priv->base + SSI_IE));
|
|
pr_debug("IC %08x\n", readl(priv->base + SSI_IC));
|
|
pr_debug("FC %08x\n", readl(priv->base + SSI_FC));
|
|
pr_debug("XDR %08x\n", readl(priv->base + SSI_XDR));
|
|
}
|
|
|
|
static void spi_cs_activate(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct uniphier_spi_platdata *plat = bus->platdata;
|
|
struct uniphier_spi_priv *priv = dev_get_priv(bus);
|
|
ulong delay_us; /* The delay completed so far */
|
|
u32 val;
|
|
|
|
/* If it's too soon to do another transaction, wait */
|
|
if (plat->deactivate_delay_us && priv->last_transaction_us) {
|
|
delay_us = timer_get_us() - priv->last_transaction_us;
|
|
if (delay_us < plat->deactivate_delay_us)
|
|
udelay(plat->deactivate_delay_us - delay_us);
|
|
}
|
|
|
|
val = readl(priv->base + SSI_FPS);
|
|
if (priv->mode & SPI_CS_HIGH)
|
|
val |= SSI_FPS_FSPOL;
|
|
else
|
|
val &= ~SSI_FPS_FSPOL;
|
|
writel(val, priv->base + SSI_FPS);
|
|
|
|
if (plat->activate_delay_us)
|
|
udelay(plat->activate_delay_us);
|
|
}
|
|
|
|
static void spi_cs_deactivate(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct uniphier_spi_platdata *plat = bus->platdata;
|
|
struct uniphier_spi_priv *priv = dev_get_priv(bus);
|
|
u32 val;
|
|
|
|
val = readl(priv->base + SSI_FPS);
|
|
if (priv->mode & SPI_CS_HIGH)
|
|
val &= ~SSI_FPS_FSPOL;
|
|
else
|
|
val |= SSI_FPS_FSPOL;
|
|
writel(val, priv->base + SSI_FPS);
|
|
|
|
/* Remember time of this transaction so we can honour the bus delay */
|
|
if (plat->deactivate_delay_us)
|
|
priv->last_transaction_us = timer_get_us();
|
|
}
|
|
|
|
static int uniphier_spi_claim_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct uniphier_spi_priv *priv = dev_get_priv(bus);
|
|
u32 val, size;
|
|
|
|
uniphier_spi_enable(priv, false);
|
|
|
|
/* disable interrupts */
|
|
writel(0, priv->base + SSI_IE);
|
|
|
|
/* bits_per_word */
|
|
size = priv->bits_per_word;
|
|
val = readl(priv->base + SSI_TXWDS);
|
|
val &= ~(SSI_TXWDS_WDLEN_MASK | SSI_TXWDS_DTLEN_MASK);
|
|
val |= FIELD_PREP(SSI_TXWDS_WDLEN_MASK, size);
|
|
val |= FIELD_PREP(SSI_TXWDS_DTLEN_MASK, size);
|
|
writel(val, priv->base + SSI_TXWDS);
|
|
|
|
val = readl(priv->base + SSI_RXWDS);
|
|
val &= ~SSI_RXWDS_DTLEN_MASK;
|
|
val |= FIELD_PREP(SSI_RXWDS_DTLEN_MASK, size);
|
|
writel(val, priv->base + SSI_RXWDS);
|
|
|
|
/* reset FIFOs */
|
|
val = SSI_FC_TXFFL | SSI_FC_RXFFL;
|
|
writel(val, priv->base + SSI_FC);
|
|
|
|
/* FIFO threthold */
|
|
val = readl(priv->base + SSI_FC);
|
|
val &= ~(SSI_FC_TXFTH_MASK | SSI_FC_RXFTH_MASK);
|
|
val |= FIELD_PREP(SSI_FC_TXFTH_MASK, priv->fifo_depth);
|
|
val |= FIELD_PREP(SSI_FC_RXFTH_MASK, priv->fifo_depth);
|
|
writel(val, priv->base + SSI_FC);
|
|
|
|
/* clear interrupts */
|
|
writel(SSI_IC_TCIC | SSI_IC_RCIC | SSI_IC_RORIC,
|
|
priv->base + SSI_IC);
|
|
|
|
uniphier_spi_enable(priv, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_spi_release_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct uniphier_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
uniphier_spi_enable(priv, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_spi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct uniphier_spi_priv *priv = dev_get_priv(bus);
|
|
const u8 *tx_buf = dout;
|
|
u8 *rx_buf = din, buf;
|
|
u32 len = bitlen / 8;
|
|
u32 tx_len, rx_len;
|
|
u32 ts, status;
|
|
int ret = 0;
|
|
|
|
if (bitlen % 8) {
|
|
dev_err(dev, "Non byte aligned SPI transfer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (flags & SPI_XFER_BEGIN)
|
|
spi_cs_activate(dev);
|
|
|
|
uniphier_spi_enable(priv, true);
|
|
|
|
ts = get_timer(0);
|
|
tx_len = len;
|
|
rx_len = len;
|
|
|
|
uniphier_spi_regdump(priv);
|
|
|
|
while (tx_len || rx_len) {
|
|
ret = wait_for_bit_le32(priv->base + SSI_SR, SSI_SR_BUSY, false,
|
|
SSI_REG_TIMEOUT * 1000, false);
|
|
if (ret) {
|
|
if (ret == -ETIMEDOUT)
|
|
dev_err(dev, "access timeout\n");
|
|
break;
|
|
}
|
|
|
|
status = readl(priv->base + SSI_SR);
|
|
/* write the data into TX */
|
|
if (tx_len && (status & SSI_SR_TNF)) {
|
|
buf = tx_buf ? *tx_buf++ : 0;
|
|
writel(buf, priv->base + SSI_XDR);
|
|
tx_len--;
|
|
}
|
|
|
|
/* read the data from RX */
|
|
if (rx_len && (status & SSI_SR_RNE)) {
|
|
buf = readl(priv->base + SSI_XDR);
|
|
if (rx_buf)
|
|
*rx_buf++ = buf;
|
|
rx_len--;
|
|
}
|
|
|
|
if (get_timer(ts) >= SSI_XFER_TIMEOUT) {
|
|
dev_err(dev, "transfer timeout\n");
|
|
ret = -ETIMEDOUT;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (flags & SPI_XFER_END)
|
|
spi_cs_deactivate(dev);
|
|
|
|
uniphier_spi_enable(priv, false);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int uniphier_spi_set_speed(struct udevice *bus, uint speed)
|
|
{
|
|
struct uniphier_spi_platdata *plat = bus->platdata;
|
|
struct uniphier_spi_priv *priv = dev_get_priv(bus);
|
|
u32 val, ckdiv;
|
|
|
|
if (speed > plat->frequency)
|
|
speed = plat->frequency;
|
|
|
|
/* baudrate */
|
|
ckdiv = DIV_ROUND_UP(SSI_CLK, speed);
|
|
ckdiv = round_up(ckdiv, 2);
|
|
|
|
val = readl(priv->base + SSI_CKS);
|
|
val &= ~SSI_CKS_CKRAT_MASK;
|
|
val |= ckdiv & SSI_CKS_CKRAT_MASK;
|
|
writel(val, priv->base + SSI_CKS);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_spi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
struct uniphier_spi_priv *priv = dev_get_priv(bus);
|
|
u32 val1, val2;
|
|
|
|
/*
|
|
* clock setting
|
|
* CKPHS capture timing. 0:rising edge, 1:falling edge
|
|
* CKINIT clock initial level. 0:low, 1:high
|
|
* CKDLY clock delay. 0:no delay, 1:delay depending on FSTRT
|
|
* (FSTRT=0: 1 clock, FSTRT=1: 0.5 clock)
|
|
*
|
|
* frame setting
|
|
* FSPOL frame signal porarity. 0: low, 1: high
|
|
* FSTRT start frame timing
|
|
* 0: rising edge of clock, 1: falling edge of clock
|
|
*/
|
|
val1 = readl(priv->base + SSI_CKS);
|
|
val2 = readl(priv->base + SSI_FPS);
|
|
|
|
switch (mode & (SPI_CPOL | SPI_CPHA)) {
|
|
case SPI_MODE_0:
|
|
/* CKPHS=1, CKINIT=0, CKDLY=1, FSTRT=0 */
|
|
val1 |= SSI_CKS_CKPHS | SSI_CKS_CKDLY;
|
|
val1 &= ~SSI_CKS_CKINIT;
|
|
val2 &= ~SSI_FPS_FSTRT;
|
|
break;
|
|
case SPI_MODE_1:
|
|
/* CKPHS=0, CKINIT=0, CKDLY=0, FSTRT=1 */
|
|
val1 &= ~(SSI_CKS_CKPHS | SSI_CKS_CKINIT | SSI_CKS_CKDLY);
|
|
val2 |= SSI_FPS_FSTRT;
|
|
break;
|
|
case SPI_MODE_2:
|
|
/* CKPHS=0, CKINIT=1, CKDLY=1, FSTRT=1 */
|
|
val1 |= SSI_CKS_CKINIT | SSI_CKS_CKDLY;
|
|
val1 &= ~SSI_CKS_CKPHS;
|
|
val2 |= SSI_FPS_FSTRT;
|
|
break;
|
|
case SPI_MODE_3:
|
|
/* CKPHS=1, CKINIT=1, CKDLY=0, FSTRT=0 */
|
|
val1 |= SSI_CKS_CKPHS | SSI_CKS_CKINIT;
|
|
val1 &= ~SSI_CKS_CKDLY;
|
|
val2 &= ~SSI_FPS_FSTRT;
|
|
break;
|
|
}
|
|
|
|
writel(val1, priv->base + SSI_CKS);
|
|
writel(val2, priv->base + SSI_FPS);
|
|
|
|
/* format */
|
|
val1 = readl(priv->base + SSI_TXWDS);
|
|
val2 = readl(priv->base + SSI_RXWDS);
|
|
if (mode & SPI_LSB_FIRST) {
|
|
val1 |= FIELD_PREP(SSI_TXWDS_TDTF_MASK, 1);
|
|
val2 |= FIELD_PREP(SSI_RXWDS_RDTF_MASK, 1);
|
|
}
|
|
writel(val1, priv->base + SSI_TXWDS);
|
|
writel(val2, priv->base + SSI_RXWDS);
|
|
|
|
priv->mode = mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_spi_ofdata_to_platdata(struct udevice *bus)
|
|
{
|
|
struct uniphier_spi_platdata *plat = bus->platdata;
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(bus);
|
|
|
|
plat->base = devfdt_get_addr_ptr(bus);
|
|
|
|
plat->frequency =
|
|
fdtdec_get_int(blob, node, "spi-max-frequency", 12500000);
|
|
plat->deactivate_delay_us =
|
|
fdtdec_get_int(blob, node, "spi-deactivate-delay", 0);
|
|
plat->activate_delay_us =
|
|
fdtdec_get_int(blob, node, "spi-activate-delay", 0);
|
|
plat->speed_hz = plat->frequency / 2;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_spi_probe(struct udevice *bus)
|
|
{
|
|
struct uniphier_spi_platdata *plat = dev_get_platdata(bus);
|
|
struct uniphier_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
priv->base = plat->base;
|
|
priv->fifo_depth = SSI_FIFO_DEPTH;
|
|
priv->bits_per_word = 8;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops uniphier_spi_ops = {
|
|
.claim_bus = uniphier_spi_claim_bus,
|
|
.release_bus = uniphier_spi_release_bus,
|
|
.xfer = uniphier_spi_xfer,
|
|
.set_speed = uniphier_spi_set_speed,
|
|
.set_mode = uniphier_spi_set_mode,
|
|
};
|
|
|
|
static const struct udevice_id uniphier_spi_ids[] = {
|
|
{ .compatible = "socionext,uniphier-scssi" },
|
|
{ /* Sentinel */ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(uniphier_spi) = {
|
|
.name = "uniphier_spi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = uniphier_spi_ids,
|
|
.ops = &uniphier_spi_ops,
|
|
.ofdata_to_platdata = uniphier_spi_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct uniphier_spi_platdata),
|
|
.priv_auto_alloc_size = sizeof(struct uniphier_spi_priv),
|
|
.probe = uniphier_spi_probe,
|
|
};
|