mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-25 13:14:19 +08:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
355 lines
8.6 KiB
C
355 lines
8.6 KiB
C
/*
|
|
* Copyright 2010-2012 Freescale Semiconductor, Inc.
|
|
* Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
|
|
* Timur Tabi <timur@freescale.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_pci.h>
|
|
#include <asm/fsl_ddr_sdram.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/io.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <fsl_mdio.h>
|
|
#include <tsec.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <netdev.h>
|
|
#include <i2c.h>
|
|
#include <hwconfig.h>
|
|
|
|
#include "../common/ngpixis.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
|
|
|
|
/* Set pmuxcr to allow both i2c1 and i2c2 */
|
|
setbits_be32(&gur->pmuxcr, 0x1000);
|
|
#ifdef CONFIG_SYS_RAMBOOT
|
|
setbits_be32(&gur->pmuxcr,
|
|
in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
|
|
#endif
|
|
|
|
/* Read back the register to synchronize the write. */
|
|
in_be32(&gur->pmuxcr);
|
|
|
|
/* Set the pin muxing to enable ETSEC2. */
|
|
clrbits_be32(&gur->pmuxcr2, 0x001F8000);
|
|
|
|
/* Enable the SPI */
|
|
clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
u8 sw;
|
|
|
|
printf("Board: P1022DS Sys ID: 0x%02x, "
|
|
"Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
|
|
in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
|
|
|
|
sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
|
|
|
|
switch ((sw & PIXIS_LBMAP_MASK) >> 6) {
|
|
case 0:
|
|
printf ("vBank: %u\n", ((sw & 0x30) >> 4));
|
|
break;
|
|
case 1:
|
|
printf ("NAND\n");
|
|
break;
|
|
case 2:
|
|
case 3:
|
|
puts ("Promjet\n");
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define CONFIG_TFP410_I2C_ADDR 0x38
|
|
|
|
/* Masks for the SSI_TDM and AUDCLK bits of the ngPIXIS BRDCFG1 register. */
|
|
#define CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK 0x0c
|
|
#define CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK 0x03
|
|
|
|
/* Route the I2C1 pins to the SSI port instead. */
|
|
#define CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI 0x08
|
|
|
|
/* Choose the 12.288Mhz codec reference clock */
|
|
#define CONFIG_PIXIS_BRDCFG1_AUDCLK_12 0x02
|
|
|
|
/* Choose the 11.2896Mhz codec reference clock */
|
|
#define CONFIG_PIXIS_BRDCFG1_AUDCLK_11 0x01
|
|
|
|
/* Connect to USB2 */
|
|
#define CONFIG_PIXIS_BRDCFG0_USB2 0x10
|
|
/* Connect to TFM bus */
|
|
#define CONFIG_PIXIS_BRDCFG1_TDM 0x0c
|
|
/* Connect to SPI */
|
|
#define CONFIG_PIXIS_BRDCFG0_SPI 0x80
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
u8 temp;
|
|
const char *audclk;
|
|
size_t arglen;
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
|
|
/* For DVI, enable the TFP410 Encoder. */
|
|
|
|
temp = 0xBF;
|
|
if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0)
|
|
return -1;
|
|
if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0)
|
|
return -1;
|
|
debug("DVI Encoder Read: 0x%02x\n", temp);
|
|
|
|
temp = 0x10;
|
|
if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0)
|
|
return -1;
|
|
if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0)
|
|
return -1;
|
|
debug("DVI Encoder Read: 0x%02x\n",temp);
|
|
|
|
/* Enable the USB2 in PMUXCR2 and FGPA */
|
|
if (hwconfig("usb2")) {
|
|
clrsetbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_ETSECUSB_MASK,
|
|
MPC85xx_PMUXCR2_USB);
|
|
setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_USB2);
|
|
}
|
|
|
|
/* tdm and audio can not enable simultaneous*/
|
|
if (hwconfig("tdm") && hwconfig("audclk")){
|
|
printf("WARNING: TDM and AUDIO can not be enabled simultaneous !\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Enable the TDM in PMUXCR and FGPA */
|
|
if (hwconfig("tdm")) {
|
|
clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TDM_MASK,
|
|
MPC85xx_PMUXCR_TDM);
|
|
setbits_8(&pixis->brdcfg1, CONFIG_PIXIS_BRDCFG1_TDM);
|
|
/* TDM need some configration option by SPI */
|
|
clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SPI_MASK,
|
|
MPC85xx_PMUXCR_SPI);
|
|
setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_SPI);
|
|
}
|
|
|
|
/*
|
|
* Enable the reference clock for the WM8776 codec, and route the MUX
|
|
* pins for SSI. The default is the 12.288 MHz clock
|
|
*/
|
|
|
|
if (hwconfig("audclk")) {
|
|
temp = in_8(&pixis->brdcfg1) & ~(CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK |
|
|
CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK);
|
|
temp |= CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI;
|
|
|
|
audclk = hwconfig_arg("audclk", &arglen);
|
|
/* Check the first two chars only */
|
|
if (audclk && (strncmp(audclk, "11", 2) == 0))
|
|
temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_11;
|
|
else
|
|
temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_12;
|
|
setbits_8(&pixis->brdcfg1, temp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* A list of PCI and SATA slots
|
|
*/
|
|
enum slot_id {
|
|
SLOT_PCIE1 = 1,
|
|
SLOT_PCIE2,
|
|
SLOT_PCIE3,
|
|
SLOT_PCIE4,
|
|
SLOT_PCIE5,
|
|
SLOT_SATA1,
|
|
SLOT_SATA2
|
|
};
|
|
|
|
/*
|
|
* This array maps the slot identifiers to their names on the P1022DS board.
|
|
*/
|
|
static const char *slot_names[] = {
|
|
[SLOT_PCIE1] = "Slot 1",
|
|
[SLOT_PCIE2] = "Slot 2",
|
|
[SLOT_PCIE3] = "Slot 3",
|
|
[SLOT_PCIE4] = "Slot 4",
|
|
[SLOT_PCIE5] = "Mini-PCIe",
|
|
[SLOT_SATA1] = "SATA 1",
|
|
[SLOT_SATA2] = "SATA 2",
|
|
};
|
|
|
|
/*
|
|
* This array maps a given SERDES configuration and SERDES device to the PCI or
|
|
* SATA slot that it connects to. This mapping is hard-coded in the FPGA.
|
|
*/
|
|
static u8 serdes_dev_slot[][SATA2 + 1] = {
|
|
[0x01] = { [PCIE3] = SLOT_PCIE4, [PCIE2] = SLOT_PCIE5 },
|
|
[0x02] = { [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
|
|
[0x09] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE4,
|
|
[PCIE2] = SLOT_PCIE5 },
|
|
[0x16] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
|
|
[PCIE2] = SLOT_PCIE3,
|
|
[SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
|
|
[0x17] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
|
|
[PCIE2] = SLOT_PCIE3 },
|
|
[0x1a] = { [PCIE1] = SLOT_PCIE1, [PCIE2] = SLOT_PCIE3,
|
|
[PCIE2] = SLOT_PCIE3,
|
|
[SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
|
|
[0x1c] = { [PCIE1] = SLOT_PCIE1,
|
|
[SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
|
|
[0x1e] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE3 },
|
|
[0x1f] = { [PCIE1] = SLOT_PCIE1 },
|
|
};
|
|
|
|
|
|
/*
|
|
* Returns the name of the slot to which the PCIe or SATA controller is
|
|
* connected
|
|
*/
|
|
const char *board_serdes_name(enum srds_prtcl device)
|
|
{
|
|
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
|
|
u32 pordevsr = in_be32(&gur->pordevsr);
|
|
unsigned int srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
|
|
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
|
|
enum slot_id slot = serdes_dev_slot[srds_cfg][device];
|
|
const char *name = slot_names[slot];
|
|
|
|
if (name)
|
|
return name;
|
|
else
|
|
return "Nothing";
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
void pci_init_board(void)
|
|
{
|
|
fsl_pcie_init_board(0);
|
|
}
|
|
#endif
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
|
const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
|
|
|
|
/*
|
|
* Remap Boot flash + PROMJET region to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
/* invalidate existing TLB entry for flash + promjet */
|
|
disable_tlb(flash_esel);
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
|
0, flash_esel, BOOKE_PAGESZ_256M, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initialize on-board and/or PCI Ethernet devices
|
|
*
|
|
* Returns:
|
|
* <0, error
|
|
* 0, no ethernet devices found
|
|
* >0, number of ethernet devices initialized
|
|
*/
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
struct fsl_pq_mdio_info mdio_info;
|
|
struct tsec_info_struct tsec_info[2];
|
|
unsigned int num = 0;
|
|
|
|
#ifdef CONFIG_TSEC1
|
|
SET_STD_TSEC_INFO(tsec_info[num], 1);
|
|
num++;
|
|
#endif
|
|
#ifdef CONFIG_TSEC2
|
|
SET_STD_TSEC_INFO(tsec_info[num], 2);
|
|
num++;
|
|
#endif
|
|
|
|
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
|
|
mdio_info.name = DEFAULT_MII_NAME;
|
|
fsl_pq_mdio_init(bis, &mdio_info);
|
|
|
|
return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis);
|
|
}
|
|
|
|
#ifdef CONFIG_OF_BOARD_SETUP
|
|
/**
|
|
* ft_codec_setup - fix up the clock-frequency property of the codec node
|
|
*
|
|
* Update the clock-frequency property based on the value of the 'audclk'
|
|
* hwconfig option. If audclk is not specified, then don't write anything
|
|
* to the device tree, because it means that the codec clock is disabled.
|
|
*/
|
|
static void ft_codec_setup(void *blob, const char *compatible)
|
|
{
|
|
const char *audclk;
|
|
size_t arglen;
|
|
u32 freq;
|
|
|
|
audclk = hwconfig_arg("audclk", &arglen);
|
|
if (audclk) {
|
|
if (strncmp(audclk, "11", 2) == 0)
|
|
freq = 11289600;
|
|
else
|
|
freq = 12288000;
|
|
|
|
do_fixup_by_compat_u32(blob, compatible, "clock-frequency",
|
|
freq, 1);
|
|
}
|
|
}
|
|
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = getenv_bootm_low();
|
|
size = getenv_bootm_size();
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
|
|
#ifdef CONFIG_HAS_FSL_DR_USB
|
|
fdt_fixup_dr_usb(blob, bd);
|
|
#endif
|
|
|
|
FT_FSL_PCI_SETUP;
|
|
|
|
#ifdef CONFIG_FSL_SGMII_RISER
|
|
fsl_sgmii_riser_fdt_fixup(blob);
|
|
#endif
|
|
|
|
/* Update the WM8776 node's clock frequency property */
|
|
ft_codec_setup(blob, "wlf,wm8776");
|
|
}
|
|
#endif
|