mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-25 05:04:23 +08:00
1552af70ec
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> Signed-off by: John Rigby <jrigby@freescale.com>
238 lines
8.0 KiB
Plaintext
238 lines
8.0 KiB
Plaintext
Freescale MCF52277EVB ColdFire Development Board
|
|
================================================
|
|
|
|
TsiChung Liew(Tsi-Chung.Liew@freescale.com)
|
|
Created Jan 8, 2008
|
|
===========================================
|
|
|
|
|
|
Changed files:
|
|
==============
|
|
|
|
- board/freescale/m52277evb/m52277evb.c Dram setup
|
|
- board/freescale/m52277evb/Makefile Makefile
|
|
- board/freescale/m52277evb/config.mk config make
|
|
- board/freescale/m52277evb/u-boot.lds Linker description
|
|
|
|
- cpu/mcf5227x/cpu.c cpu specific code
|
|
- cpu/mcf5227x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs
|
|
- cpu/mcf5227x/interrupts.c cpu specific interrupt support
|
|
- cpu/mcf5227x/speed.c system, flexbus, and cpu clock
|
|
- cpu/mcf5227x/Makefile Makefile
|
|
- cpu/mcf5227x/config.mk config make
|
|
- cpu/mcf5227x/start.S start up assembly code
|
|
|
|
- doc/README.m52277evb This readme file
|
|
|
|
- drivers/serial/mcfuart.c ColdFire common UART driver
|
|
- drivers/rtc/mcfrtc.c Realtime clock Driver
|
|
|
|
- include/asm-m68k/bitops.h Bit operation function export
|
|
- include/asm-m68k/byteorder.h Byte order functions
|
|
- include/asm-m68k/crossbar.h CrossBar structure and definition
|
|
- include/asm-m68k/dspi.h DSPI structure and definition
|
|
- include/asm-m68k/edma.h eDMA structure and definition
|
|
- include/asm-m68k/flexbus.h FlexBus structure and definition
|
|
- include/asm-m68k/fsl_i2c.h I2C structure and definition
|
|
- include/asm-m68k/global_data.h Global data structure
|
|
- include/asm-m68k/immap.h ColdFire specific header file and driver macros
|
|
- include/asm-m68k/immap_5227x.h mcf5227x specific header file
|
|
- include/asm-m68k/io.h io functions
|
|
- include/asm-m68k/lcd.h LCD structure and definition
|
|
- include/asm-m68k/m5227x.h mcf5227x specific header file
|
|
- include/asm-m68k/posix_types.h Posix
|
|
- include/asm-m68k/processor.h header file
|
|
- include/asm-m68k/ptrace.h Exception structure
|
|
- include/asm-m68k/rtc.h Realtime clock header file
|
|
- include/asm-m68k/ssi.h SSI structure and definition
|
|
- include/asm-m68k/string.h String function export
|
|
- include/asm-m68k/timer.h Timer structure and definition
|
|
- include/asm-m68k/types.h Data types definition
|
|
- include/asm-m68k/uart.h Uart structure and definition
|
|
- include/asm-m68k/u-boot.h u-boot structure
|
|
|
|
- include/configs/M52277EVB.h Board specific configuration file
|
|
|
|
- lib_m68k/board.c board init function
|
|
- lib_m68k/cache.c
|
|
- lib_m68k/interrupts Coldfire common interrupt functions
|
|
- lib_m68k/m68k_linux.c
|
|
- lib_m68k/time.c Timer functions (Dma timer and PIT)
|
|
- lib_m68k/traps.c Exception init code
|
|
|
|
1 MCF52277 specific Options/Settings
|
|
====================================
|
|
1.1 pre-loader is no longer suppoer in this coldfire family
|
|
|
|
1.2 Configuration settings for M52277EVB Development Board
|
|
CONFIG_MCF5227x -- define for all MCF5227x CPUs
|
|
CONFIG_M52277 -- define for all Freescale MCF52277 CPUs
|
|
CONFIG_M52277EVB -- define for M52277EVB board
|
|
|
|
CONFIG_MCFUART -- define to use common CF Uart driver
|
|
CFG_UART_PORT -- define UART port number, start with 0, 1 and 2
|
|
CONFIG_BAUDRATE -- define UART baudrate
|
|
|
|
CONFIG_MCFRTC -- define to use common CF RTC driver
|
|
CFG_MCFRTC_BASE -- provide base address for RTC in immap.h
|
|
CFG_RTC_OSCILLATOR -- define RTC clock frequency
|
|
RTC_DEBUG -- define to show RTC debug message
|
|
CONFIG_CMD_DATE -- enable to use date feature in u-boot
|
|
|
|
CONFIG_MCFTMR -- define to use DMA timer
|
|
CONFIG_MCFPIT -- define to use PIT timer
|
|
|
|
CONFIG_FSL_I2C -- define to use FSL common I2C driver
|
|
CONFIG_HARD_I2C -- define for I2C hardware support
|
|
CONFIG_SOFT_I2C -- define for I2C bit-banged
|
|
CFG_I2C_SPEED -- define for I2C speed
|
|
CFG_I2C_SLAVE -- define for I2C slave address
|
|
CFG_I2C_OFFSET -- define for I2C base address offset
|
|
CFG_IMMR -- define for MBAR offset
|
|
|
|
CFG_MBAR -- define MBAR offset
|
|
|
|
CONFIG_MONITOR_IS_IN_RAM -- Not support
|
|
|
|
CFG_INIT_RAM_ADDR -- defines the base address of the MCF52277 internal SRAM
|
|
|
|
CFG_CSn_BASE -- defines the Chip Select Base register
|
|
CFG_CSn_MASK -- defines the Chip Select Mask register
|
|
CFG_CSn_CTRL -- defines the Chip Select Control register
|
|
|
|
CFG_SDRAM_BASE -- defines the DRAM Base
|
|
|
|
CONFIG_LCD and CONFIG_CMD_USB are not supported in this current u-boot,
|
|
update will be provided at later time
|
|
|
|
2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
|
|
===========================================
|
|
2.1. System memory map:
|
|
Flash: 0x00000000-0x3FFFFFFF (1024MB)
|
|
DDR: 0x40000000-0x7FFFFFFF (1024MB)
|
|
SRAM: 0x80000000-0x8FFFFFFF (256MB)
|
|
IP: 0xF0000000-0xFFFFFFFF (256MB)
|
|
|
|
2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
|
|
linux kernel, you can customize it based on your system requirements:
|
|
Flash0: 0x00000000-0x00FFFFFF (16MB)
|
|
|
|
DDR: 0x40000000-0x4FFFFFFF (64MB)
|
|
SRAM: 0x80000000-0x80007FFF (32KB)
|
|
IP: 0xFC000000-0xFC0FFFFF (64KB)
|
|
|
|
3. COMPILATION
|
|
==============
|
|
3.1 To create U-Boot the gcc-4.1-xx compiler set (ColdFire ELF or
|
|
uClinux version) from codesourcery.com was used. Download it from:
|
|
http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
|
|
|
|
3.2 Compilation
|
|
export CROSS_COMPILE=cross-compile-prefix
|
|
cd u-boot-1.x.x
|
|
make distclean
|
|
make M52277EVB_config
|
|
make
|
|
|
|
4. SCREEN DUMP
|
|
==============
|
|
4.1 M52277EVB Development board
|
|
(NOTE: May not show exactly the same)
|
|
|
|
U-Boot 1.3.1 (Jan 8 2008 - 12:44:08)
|
|
|
|
CPU: Freescale MCF52277 (Mask:6c Version:0)
|
|
CPU CLK 160 Mhz BUS CLK 80 Mhz FLB CLK 80 MHZ
|
|
INP CLK 16 Mhz VCO CLK 480 Mhz
|
|
Board: Freescale 52277 EVB
|
|
I2C: ready
|
|
DRAM: 64 MB
|
|
FLASH: 16 MB
|
|
In: serial
|
|
Out: serial
|
|
Err: serial
|
|
-> print
|
|
baudrate=115200
|
|
hostname=M52277EVB
|
|
inpclk=16000000
|
|
loadaddr=(0x40000000 + 0x10000)
|
|
load=tftp ${loadaddr) ${u-boot}
|
|
upd=run load; run prog
|
|
prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
|
|
u-boot=u-boot.bin
|
|
stdin=serial
|
|
stdout=serial
|
|
stderr=serial
|
|
mem=65024k
|
|
|
|
Environment size: 280/32764 bytes
|
|
-> bdinfo
|
|
memstart = 0x40000000
|
|
memsize = 0x04000000
|
|
flashstart = 0x00000000
|
|
flashsize = 0x01000000
|
|
flashoffset = 0x00000000
|
|
sramstart = 0x80000000
|
|
sramsize = 0x00008000
|
|
mbar = 0xFC000000
|
|
busfreq = 80 MHz
|
|
flbfreq = 80 Mhz
|
|
inpfreq = 16 Mhz
|
|
vcofreq = 480 Mhz
|
|
|
|
baudrate = 115200 bps
|
|
->
|
|
-> help
|
|
? - alias for 'help'
|
|
autoscr - run script from memory
|
|
base - print or set address offset
|
|
bdinfo - print Board Info structure
|
|
boot - boot default, i.e., run 'bootcmd'
|
|
bootd - boot default, i.e., run 'bootcmd'
|
|
bootelf - Boot from an ELF image in memory
|
|
bootm - boot application image from memory
|
|
bootp - boot image via network using BootP/TFTP protocol
|
|
bootvx - Boot vxWorks from an ELF image
|
|
cmp - memory compare
|
|
coninfo - print console devices and information
|
|
cp - memory copy
|
|
crc32 - checksum calculation
|
|
date - get/set/reset date & time
|
|
dcache - enable or disable data cache
|
|
echo - echo args to console
|
|
erase - erase FLASH memory
|
|
flinfo - print FLASH memory information
|
|
go - start application at address 'addr'
|
|
help - print online help
|
|
icache - enable or disable instruction cache
|
|
icrc32 - checksum calculation
|
|
iloop - infinite loop on address range
|
|
imd - i2c memory display
|
|
iminfo - print header information for application image
|
|
imls - list all images found in flash
|
|
imm - i2c memory modify (auto-incrementing)
|
|
imw - memory write (fill)
|
|
inm - memory modify (constant address)
|
|
iprobe - probe to discover valid I2C chip addresses
|
|
itest - return true/false on integer compare
|
|
loadb - load binary file over serial line (kermit mode)
|
|
loads - load S-Record file over serial line
|
|
loady - load binary file over serial line (ymodem mode)
|
|
loop - infinite loop on address range
|
|
ls - list files in a directory (default /)
|
|
md - memory display
|
|
mm - memory modify (auto-incrementing)
|
|
mtest - simple RAM test
|
|
mw - memory write (fill)
|
|
nm - memory modify (constant address)
|
|
ping - send ICMP ECHO_REQUEST to network host
|
|
printenv- print environment variables
|
|
protect - enable or disable FLASH write protection
|
|
reset - Perform RESET of the CPU
|
|
run - run commands in an environment variable
|
|
saveenv - save environment variables to persistent storage
|
|
setenv - set environment variables
|
|
sleep - delay execution for some time
|
|
version - print monitor version
|
|
->
|