mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-26 05:34:30 +08:00
93d4334f7f
We have switched to Kconfig and the boards.cfg file is going to be removed. We have to retrieve the board status and maintainers information from it. The MAINTAINERS format as in Linux Kernel would be nice because we can crib the scripts/get_maintainer.pl script. After some discussion, we chose to put a MAINTAINERS file under each board directory, not the top-level one because we want to collect relevant information for a board into a single place. TODO: Modify get_maintainer.pl to scan multiple MAINTAINERS files. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Suggested-by: Tom Rini <trini@ti.com> Acked-by: Simon Glass <sjg@chromium.org> |
||
|---|---|---|
| .. | ||
| cgtqmx6eval.c | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
U-Boot for the Congatec Conga-QEVAl Evaluation Carrier board with qmx6 quad module. This file contains information for the port of U-Boot to the Congatec Conga-QEVAl Evaluation Carrier board with qmx6 quad module. 1. Boot source, boot from SD card --------------------------------- By default, the Congatec board can boot only from the SPI-NOR. But, with the u-boot version provided with the board you can write boot registers to force the board to reboot and boot from the SD slot. If "bmode" command is not available from your pre-installed u-boot, these instruction will produce the same effect: conga-QMX6 U-Boot > mw.l 0x20d8040 0x3850 conga-QMX6 U-Boot > mw.l 0x020d8044 0x10000000 conga-QMX6 U-Boot > reset resetting ... The the board will reboot and, if you have written your SD correctly the board will use u-boot that live into the SD To copy the resulting u-boot.imx to the SD card: dd if=u-boot.imx of=/dev/xxx bs=512 seek=2 Note: Replace xxx with the device representing the SD card in your system.