mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-28 07:03:31 +08:00
d90c7ac7a9
LS1046AFRWY board supports LS1046A family SoCs. This patch add base support for this board. Board support's 4GB ddr memory, i2c, micro-click module,microSD card, serial console,qspi nor flash,ifc nand flash,qsgmii network interface, usb 3.0 and serdes interface to support two x1gen3 pcie interface. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
77 lines
2.7 KiB
Plaintext
77 lines
2.7 KiB
Plaintext
Overview
|
|
--------
|
|
The LS1046A Freeway Board (iFRWY) is a high-performance computing,
|
|
evaluation, and development platform that supports the QorIQ LS1046A
|
|
LayerScape Architecture processor. The FRWY-LS1046A provides SW development
|
|
platform for the Freescale LS1046A processor series, with a complete
|
|
debugging environment. The FRWY-LS1046A is lead-free and RoHS-compliant.
|
|
|
|
LS1046A SoC Overview
|
|
--------------------
|
|
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1046A
|
|
SoC overview.
|
|
|
|
FRWY-LS1046A board Overview
|
|
-----------------------
|
|
- SERDES1 Connections, 4 lanes supporting:
|
|
- Lane0: Unused
|
|
- Lane1: Unused
|
|
- Lane2: QSGMII
|
|
- Lane3: Unused
|
|
- SERDES2 Connections, 4 lanes supporting:
|
|
- Lane0: Unused
|
|
- Lane1: PCIe3 with PCIe x1 slot
|
|
- Lane2: Unused
|
|
- Lane3: PCIe3 with PCIe x1 slot
|
|
- DDR Controller
|
|
- 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s
|
|
-IFC/Local Bus
|
|
- One 512 MB NAND flash with ECC support
|
|
- USB 3.0
|
|
- Two Type A port
|
|
- SDHC: connects directly to a full microSD slot
|
|
- QSPI: 64 MB high-speed flash Memory for boot code and storage
|
|
- 4 I2C controllers
|
|
- UART
|
|
- Two 4-pin serial ports at up to 115.2 Kbit/s
|
|
- Two DB9 D-Type connectors supporting one Serial port each
|
|
- ARM JTAG support
|
|
|
|
Memory map from core's view
|
|
----------------------------
|
|
Start Address End Address Description Size
|
|
0x00_0000_0000 - 0x00_000F_FFFF Secure Boot ROM 1MB
|
|
0x00_0100_0000 - 0x00_0FFF_FFFF CCSRBAR 240MB
|
|
0x00_1000_0000 - 0x00_1000_FFFF OCRAM0 64KB
|
|
0x00_1001_0000 - 0x00_1001_FFFF OCRAM1 64KB
|
|
0x00_2000_0000 - 0x00_20FF_FFFF DCSR 16MB
|
|
0x00_7E80_0000 - 0x00_7E80_FFFF IFC - NAND Flash 64KB
|
|
0x00_7FB0_0000 - 0x00_7FB0_0FFF IFC - CPLD 4KB
|
|
0x00_8000_0000 - 0x00_FFFF_FFFF DRAM1 2GB
|
|
0x05_0000_0000 - 0x05_07FF_FFFF QMAN S/W Portal 128M
|
|
0x05_0800_0000 - 0x05_0FFF_FFFF BMAN S/W Portal 128M
|
|
0x08_8000_0000 - 0x09_FFFF_FFFF DRAM2 6GB
|
|
0x40_0000_0000 - 0x47_FFFF_FFFF PCI Express1 32G
|
|
0x48_0000_0000 - 0x4F_FFFF_FFFF PCI Express2 32G
|
|
0x50_0000_0000 - 0x57_FFFF_FFFF PCI Express3 32G
|
|
|
|
QSPI flash map:
|
|
Start Address End Address Description Size
|
|
0x00_4000_0000 - 0x00_400F_FFFF RCW + PBI + BL2 1MB
|
|
0x00_4010_0000 - 0x00_404F_FFFF FIP Image
|
|
(Bl31 + BL32(optee.
|
|
bin) + Bl33(uboot)
|
|
+ headers for secure
|
|
boot) 4MB
|
|
0x00_4050_0000 - 0x00_405F_FFFF Boot Firmware Env 1MB
|
|
0x00_4060_0000 - 0x00_408F_FFFF Secure boot headers 3MB
|
|
0x00_4090_0000 - 0x00_4093_FFFF FMan ucode 256KB
|
|
0x00_4094_0000 - 0x00_4097_FFFF QE/uQE firmware 256KB
|
|
0x00_409C_0000 - 0x00_409F_FFFF Reserved 256KB
|
|
0x00_4100_0000 - 0x00_43FF_FFFF FIT Image 48MB
|
|
|
|
Booting Options
|
|
---------------
|
|
a) QSPI boot
|
|
b) microSD boot
|