mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-02 17:13:28 +08:00
857b9cb69f
Though nios2-generic board meant to be a template, it is helpful to be able to test on a real hardware. As the nios2 linux is developed and tested on a 3c120 FPGA based Golden Hardware Reference Design, it makes sense to rebase nios2-generic on this FPGA design. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
90 lines
2.9 KiB
C
90 lines
2.9 KiB
C
/*
|
|
* This header is generated by sopc2dts
|
|
* Sopc2dts is written by Walter Goossens <waltergoossens@home.nl>
|
|
* in cooperation with the nios2 community <Nios2-dev@sopc.et.ntust.edu.tw>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#ifndef _CUSTOM_FPGA_H_
|
|
#define _CUSTOM_FPGA_H_
|
|
|
|
/* generated from qsys_ghrd_3c120.sopcinfo */
|
|
|
|
/* Dumping slaves of cpu.data_master */
|
|
|
|
/* cpu.jtag_debug_module is a altera_nios2_qsys */
|
|
#define CONFIG_SYS_CLK_FREQ 125000000
|
|
#define CONFIG_SYS_DCACHE_SIZE 32768
|
|
#define CONFIG_SYS_DCACHELINE_SIZE 32
|
|
#define CONFIG_SYS_ICACHELINE_SIZE 32
|
|
#define CONFIG_SYS_EXCEPTION_ADDR 0xd0000020
|
|
#define CONFIG_SYS_ICACHE_SIZE 32768
|
|
#define CONFIG_SYS_RESET_ADDR 0xc2800000
|
|
#define IO_REGION_BASE 0xE0000000
|
|
|
|
/* pb_cpu_to_ddr2_bot.s0 is a altera_avalon_mm_bridge */
|
|
/* Dumping slaves of pb_cpu_to_ddr2_bot.m0 */
|
|
|
|
/* ddr2_bot.s1 is a altmemddr2 */
|
|
#define CONFIG_SYS_SDRAM_BASE 0xD0000000
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x08000000
|
|
|
|
/* pb_cpu_to_io.s0 is a altera_avalon_mm_bridge */
|
|
/* Dumping slaves of pb_cpu_to_io.m0 */
|
|
|
|
/* timer_1ms.s1 is a altera_avalon_timer */
|
|
#define CONFIG_SYS_TIMER_IRQ 11
|
|
#define CONFIG_SYS_TIMER_FREQ 125000000
|
|
#define CONFIG_SYS_TIMER_BASE 0xE8400000
|
|
|
|
/* sysid.control_slave is a altera_avalon_sysid_qsys */
|
|
#define CONFIG_SYS_SYSID_BASE 0xE8004D40
|
|
|
|
/* jtag_uart.avalon_jtag_slave is a altera_avalon_jtag_uart */
|
|
#define CONFIG_SYS_JTAG_UART_BASE 0xE8004D50
|
|
|
|
/* tse_mac.control_port is a triple_speed_ethernet */
|
|
#define CONFIG_SYS_ALTERA_TSE_RX_FIFO 2048
|
|
#define CONFIG_SYS_ALTERA_TSE_SGDMA_TX_BASE 0xE8004800
|
|
#define CONFIG_SYS_ALTERA_TSE_SGDMA_RX_BASE 0xE8004400
|
|
#define CONFIG_SYS_ALTERA_TSE_TX_FIFO 2048
|
|
#define CONFIG_SYS_ALTERA_TSE_DESC_SIZE 0x00002000
|
|
#define CONFIG_SYS_ALTERA_TSE_MAC_BASE 0xE8004000
|
|
#define CONFIG_SYS_ALTERA_TSE_DESC_BASE 0xE8002000
|
|
#define CONFIG_ALTERA_TSE
|
|
#define CONFIG_MII
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_SYS_ALTERA_TSE_PHY_ADDR 18
|
|
#define CONFIG_SYS_ALTERA_TSE_FLAGS 1
|
|
|
|
/* uart.s1 is a altera_avalon_uart */
|
|
#define CONFIG_SYS_UART_BAUD 115200
|
|
#define CONFIG_SYS_UART_BASE 0xE8004C80
|
|
#define CONFIG_SYS_UART_FREQ 62500000
|
|
|
|
/* user_led_pio_8out.s1 is a altera_avalon_pio */
|
|
#define USER_LED_PIO_8OUT_BASE 0xE8004CC0
|
|
|
|
/* user_dipsw_pio_8in.s1 is a altera_avalon_pio */
|
|
#define USER_DIPSW_PIO_8IN_BASE 0xE8004CE0
|
|
#define USER_DIPSW_PIO_8IN_IRQ 8
|
|
|
|
/* user_pb_pio_4in.s1 is a altera_avalon_pio */
|
|
#define USER_PB_PIO_4IN_BASE 0xE8004D00
|
|
#define USER_PB_PIO_4IN_IRQ 9
|
|
|
|
/* cfi_flash_64m.uas is a altera_generic_tristate_controller */
|
|
#define CFI_FLASH_64M_BASE 0xE0000000
|
|
|
|
/* ext_flash.s1 is a altera_avalon_cfi_flash */
|
|
#define CONFIG_SYS_FLASH_BASE CFI_FLASH_64M_BASE
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
|
#define CONFIG_SYS_FLASH_PROTECTION
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512
|
|
|
|
#endif /* _CUSTOM_FPGA_H_ */
|