mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-24 12:44:23 +08:00
4f6fc15b42
The TI DA850/OMAP-L138/AM18x EVM can be populated with devices
having different maximum allowed CPU clock rating.
The maximum clock the chip can support can only be determined from
the label on the package (not software readable).
Introduce a method to pass the maximum allowed clock rate information
to kernel using ATAG_REVISION. The kernel uses this information to
determine the maximum cpu clock rate reachable using cpufreq.
Note that U-Boot itself does not set the CPU clock rate. The CPU
clock is setup by a primary bootloader ("UBL"). The rate setup by
UBL could be different from the maximum clock rate supported by the
device.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
142 lines
3.6 KiB
Plaintext
142 lines
3.6 KiB
Plaintext
Summary
|
|
=======
|
|
|
|
This README is about U-Boot support for TI's ARM 926EJS based family of SoCs.
|
|
These SOCs are used for cameras, video security and surveillance, DVR's, etc.
|
|
DaVinci SOC's comprise of DM644x, DM646x, DM35x and DM36x series of SOC's
|
|
Additionally there are some SOCs meant for the audio market which though have
|
|
an OMAP part number are very similar to the DaVinci series of SOC's
|
|
Additionally, some family members contain a TI DSP and/or graphics
|
|
co processors along with a host of other peripherals.
|
|
|
|
Currently the following boards are supported:
|
|
|
|
* TI DaVinci DM644x EVM
|
|
|
|
* TI DaVinci DM646x EVM
|
|
|
|
* TI DaVinci DM355 EVM
|
|
|
|
* TI DaVinci DM365 EVM
|
|
|
|
* TI DA830 EVM
|
|
|
|
* TI DA850 EVM
|
|
|
|
* DM355 based Leopard board
|
|
|
|
* DM644x based schmoogie board
|
|
|
|
* DM644x based sffsdr board
|
|
|
|
* DM644x based sonata board
|
|
|
|
Build
|
|
=====
|
|
|
|
* TI DaVinci DM644x EVM:
|
|
|
|
make davinci_dvevm_config
|
|
make
|
|
|
|
* TI DaVinci DM646x EVM:
|
|
|
|
make davinci_dm6467evm_config
|
|
make
|
|
|
|
* TI DaVinci DM355 EVM:
|
|
|
|
make davinci_dm355evm_config
|
|
make
|
|
|
|
* TI DaVinci DM365 EVM:
|
|
|
|
make davinci_dm365evm_config
|
|
make
|
|
|
|
* TI DA830 EVM:
|
|
|
|
make da830evm_config
|
|
make
|
|
|
|
* TI DA850 EVM:
|
|
|
|
make da850evm_config
|
|
make
|
|
|
|
* DM355 based Leopard board:
|
|
|
|
make davinci_dm355leopard_config
|
|
make
|
|
|
|
* DM644x based schmoogie board:
|
|
|
|
make davinci_schmoogie_config
|
|
make
|
|
|
|
* DM644x based sffsdr board:
|
|
|
|
make davinci_sffsdr_config
|
|
make
|
|
|
|
* DM644x based sonata board:
|
|
|
|
make davinci_sonata_config
|
|
make
|
|
|
|
Bootloaders
|
|
===============
|
|
|
|
The DaVinci SOC's use 2 bootloaders. The low level initialization
|
|
is done by a UBL(user boot loader). The UBL is written to a NAND/NOR/SPI flash
|
|
by a programmer. During initial bootup, the ROM Bootloader reads the UBL
|
|
from a storage device and loads it into the IRAM. The UBL then loads the U-Boot
|
|
into the RAM.
|
|
The programmers and UBL are always released as part of any standard TI
|
|
software release associated with an SOC.
|
|
|
|
Environment Variables
|
|
=====================
|
|
|
|
The DA850 EVM allows the user to specify the maximum cpu clock allowed by the
|
|
silicon, in Hz, via an environment variable "maxcpuclk".
|
|
|
|
The maximum clock rate allowed depends on the silicon populated on the EVM.
|
|
Please make sure you understand the restrictions placed on this clock in the
|
|
device specific datasheet before setting up this variable. This information is
|
|
passed to the Linux kernel using the ATAG_REVISION atag.
|
|
|
|
If "maxcpuclk" is not defined, the configuration CONFIG_DA850_EVM_MAX_CPU_CLK
|
|
is used to obtain this information.
|
|
|
|
Links
|
|
=====
|
|
|
|
1) TI DaVinci DM355 EVM:
|
|
http://focus.ti.com/docs/prod/folders/print/tms320dm355.html
|
|
http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=203&osCsid=c499af6087317f11b3da19b4e8f1af32
|
|
|
|
2) TI DaVinci DM365 EVM:
|
|
http://focus.ti.com/docs/prod/folders/print/tms320dm365.html?247SEM=
|
|
http://support.spectrumdigital.com/boards/evmdm365/revc/
|
|
|
|
3) DaVinci DM355 based leopard board
|
|
http://designsomething.org/leopardboard/default.aspx
|
|
http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=192&osCsid=67c20335668ffc57cb35727106eb24b1
|
|
|
|
4) TI DaVinci DM6467 EVM:
|
|
http://focus.ti.com/docs/prod/folders/print/tms320dm6467.html
|
|
http://support.spectrumdigital.com/boards/evmdm6467/revf/
|
|
|
|
5) TI DaVinci DM6446 EVM:
|
|
http://focus.ti.com/docs/prod/folders/print/tms320dm6446.html
|
|
http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=222
|
|
|
|
6) TI DA830 EVM
|
|
http://focus.ti.com/apps/docs/gencontent.tsp?appId=1&contentId=52385
|
|
http://www.spectrumdigital.com/product_info.php?cPath=37&products_id=214
|
|
|
|
7) TI DA850 EVM
|
|
http://focus.ti.com/docs/prod/folders/print/omap-l138.html
|
|
http://www.logicpd.com/products/development-kits/zoom-omap-l138-evm-development-kit
|