mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-26 05:34:30 +08:00
2c62c56a86
The PIO4 is introduced from SAMA5D2, as a new version for Atmel PIO controller. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
297 lines
7.3 KiB
C
297 lines
7.3 KiB
C
/*
|
|
* Atmel PIO4 device driver
|
|
*
|
|
* Copyright (C) 2015 Atmel Corporation
|
|
* Wenyou.Yang <wenyou.yang@atmel.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <mach/gpio.h>
|
|
#include <mach/atmel_pio4.h>
|
|
|
|
#define ATMEL_PIO4_PINS_PER_BANK 32
|
|
|
|
/*
|
|
* Register Field Definitions
|
|
*/
|
|
#define ATMEL_PIO4_CFGR_FUNC (0x7 << 0)
|
|
#define ATMEL_PIO4_CFGR_FUNC_GPIO (0x0 << 0)
|
|
#define ATMEL_PIO4_CFGR_FUNC_PERIPH_A (0x1 << 0)
|
|
#define ATMEL_PIO4_CFGR_FUNC_PERIPH_B (0x2 << 0)
|
|
#define ATMEL_PIO4_CFGR_FUNC_PERIPH_C (0x3 << 0)
|
|
#define ATMEL_PIO4_CFGR_FUNC_PERIPH_D (0x4 << 0)
|
|
#define ATMEL_PIO4_CFGR_FUNC_PERIPH_E (0x5 << 0)
|
|
#define ATMEL_PIO4_CFGR_FUNC_PERIPH_F (0x6 << 0)
|
|
#define ATMEL_PIO4_CFGR_FUNC_PERIPH_G (0x7 << 0)
|
|
#define ATMEL_PIO4_CFGR_DIR (0x1 << 8)
|
|
#define ATMEL_PIO4_CFGR_PUEN (0x1 << 9)
|
|
#define ATMEL_PIO4_CFGR_PDEN (0x1 << 10)
|
|
#define ATMEL_PIO4_CFGR_IFEN (0x1 << 12)
|
|
#define ATMEL_PIO4_CFGR_IFSCEN (0x1 << 13)
|
|
#define ATMEL_PIO4_CFGR_OPD (0x1 << 14)
|
|
#define ATMEL_PIO4_CFGR_SCHMITT (0x1 << 15)
|
|
#define ATMEL_PIO4_CFGR_DRVSTR (0x3 << 16)
|
|
#define ATMEL_PIO4_CFGR_DRVSTR_LOW0 (0x0 << 16)
|
|
#define ATMEL_PIO4_CFGR_DRVSTR_LOW1 (0x1 << 16)
|
|
#define ATMEL_PIO4_CFGR_DRVSTR_MEDIUM (0x2 << 16)
|
|
#define ATMEL_PIO4_CFGR_DRVSTR_HIGH (0x3 << 16)
|
|
#define ATMEL_PIO4_CFGR_EVTSEL (0x7 << 24)
|
|
#define ATMEL_PIO4_CFGR_EVTSEL_FALLING (0x0 << 24)
|
|
#define ATMEL_PIO4_CFGR_EVTSEL_RISING (0x1 << 24)
|
|
#define ATMEL_PIO4_CFGR_EVTSEL_BOTH (0x2 << 24)
|
|
#define ATMEL_PIO4_CFGR_EVTSEL_LOW (0x3 << 24)
|
|
#define ATMEL_PIO4_CFGR_EVTSEL_HIGH (0x4 << 24)
|
|
#define ATMEL_PIO4_CFGR_PCFS (0x1 << 29)
|
|
#define ATMEL_PIO4_CFGR_ICFS (0x1 << 30)
|
|
|
|
static struct atmel_pio4_port *atmel_pio4_port_base(u32 port)
|
|
{
|
|
struct atmel_pio4_port *base = NULL;
|
|
|
|
switch (port) {
|
|
case AT91_PIO_PORTA:
|
|
base = (struct atmel_pio4_port *)ATMEL_BASE_PIOA;
|
|
break;
|
|
case AT91_PIO_PORTB:
|
|
base = (struct atmel_pio4_port *)ATMEL_BASE_PIOB;
|
|
break;
|
|
case AT91_PIO_PORTC:
|
|
base = (struct atmel_pio4_port *)ATMEL_BASE_PIOC;
|
|
break;
|
|
case AT91_PIO_PORTD:
|
|
base = (struct atmel_pio4_port *)ATMEL_BASE_PIOD;
|
|
break;
|
|
default:
|
|
printf("Error: Atmel PIO4: Failed to get PIO base of port#%d!\n",
|
|
port);
|
|
break;
|
|
}
|
|
|
|
return base;
|
|
}
|
|
|
|
static int atmel_pio4_config_io_func(u32 port, u32 pin,
|
|
u32 func, u32 use_pullup)
|
|
{
|
|
struct atmel_pio4_port *port_base;
|
|
u32 reg, mask;
|
|
|
|
if (pin >= ATMEL_PIO4_PINS_PER_BANK)
|
|
return -ENODEV;
|
|
|
|
port_base = atmel_pio4_port_base(port);
|
|
if (!port_base)
|
|
return -ENODEV;
|
|
|
|
mask = 1 << pin;
|
|
reg = func;
|
|
reg |= use_pullup ? ATMEL_PIO4_CFGR_PUEN : 0;
|
|
|
|
writel(mask, &port_base->mskr);
|
|
writel(reg, &port_base->cfgr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int atmel_pio4_set_gpio(u32 port, u32 pin, u32 use_pullup)
|
|
{
|
|
return atmel_pio4_config_io_func(port, pin,
|
|
ATMEL_PIO4_CFGR_FUNC_GPIO,
|
|
use_pullup);
|
|
}
|
|
|
|
int atmel_pio4_set_a_periph(u32 port, u32 pin, u32 use_pullup)
|
|
{
|
|
return atmel_pio4_config_io_func(port, pin,
|
|
ATMEL_PIO4_CFGR_FUNC_PERIPH_A,
|
|
use_pullup);
|
|
}
|
|
|
|
int atmel_pio4_set_b_periph(u32 port, u32 pin, u32 use_pullup)
|
|
{
|
|
return atmel_pio4_config_io_func(port, pin,
|
|
ATMEL_PIO4_CFGR_FUNC_PERIPH_B,
|
|
use_pullup);
|
|
}
|
|
|
|
int atmel_pio4_set_c_periph(u32 port, u32 pin, u32 use_pullup)
|
|
{
|
|
return atmel_pio4_config_io_func(port, pin,
|
|
ATMEL_PIO4_CFGR_FUNC_PERIPH_C,
|
|
use_pullup);
|
|
}
|
|
|
|
int atmel_pio4_set_d_periph(u32 port, u32 pin, u32 use_pullup)
|
|
{
|
|
return atmel_pio4_config_io_func(port, pin,
|
|
ATMEL_PIO4_CFGR_FUNC_PERIPH_D,
|
|
use_pullup);
|
|
}
|
|
|
|
int atmel_pio4_set_e_periph(u32 port, u32 pin, u32 use_pullup)
|
|
{
|
|
return atmel_pio4_config_io_func(port, pin,
|
|
ATMEL_PIO4_CFGR_FUNC_PERIPH_E,
|
|
use_pullup);
|
|
}
|
|
|
|
int atmel_pio4_set_f_periph(u32 port, u32 pin, u32 use_pullup)
|
|
{
|
|
return atmel_pio4_config_io_func(port, pin,
|
|
ATMEL_PIO4_CFGR_FUNC_PERIPH_F,
|
|
use_pullup);
|
|
}
|
|
|
|
int atmel_pio4_set_g_periph(u32 port, u32 pin, u32 use_pullup)
|
|
{
|
|
return atmel_pio4_config_io_func(port, pin,
|
|
ATMEL_PIO4_CFGR_FUNC_PERIPH_G,
|
|
use_pullup);
|
|
}
|
|
|
|
int atmel_pio4_set_pio_output(u32 port, u32 pin, u32 value)
|
|
{
|
|
struct atmel_pio4_port *port_base;
|
|
u32 reg, mask;
|
|
|
|
if (pin >= ATMEL_PIO4_PINS_PER_BANK)
|
|
return -ENODEV;
|
|
|
|
port_base = atmel_pio4_port_base(port);
|
|
if (!port_base)
|
|
return -ENODEV;
|
|
|
|
mask = 0x01 << pin;
|
|
reg = ATMEL_PIO4_CFGR_FUNC_GPIO | ATMEL_PIO4_CFGR_DIR;
|
|
|
|
writel(mask, &port_base->mskr);
|
|
writel(reg, &port_base->cfgr);
|
|
|
|
if (value)
|
|
writel(mask, &port_base->sodr);
|
|
else
|
|
writel(mask, &port_base->codr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int atmel_pio4_get_pio_input(u32 port, u32 pin)
|
|
{
|
|
struct atmel_pio4_port *port_base;
|
|
u32 reg, mask;
|
|
|
|
if (pin >= ATMEL_PIO4_PINS_PER_BANK)
|
|
return -ENODEV;
|
|
|
|
port_base = atmel_pio4_port_base(port);
|
|
if (!port_base)
|
|
return -ENODEV;
|
|
|
|
mask = 0x01 << pin;
|
|
reg = ATMEL_PIO4_CFGR_FUNC_GPIO;
|
|
|
|
writel(mask, &port_base->mskr);
|
|
writel(reg, &port_base->cfgr);
|
|
|
|
return (readl(&port_base->pdsr) & mask) ? 1 : 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DM_GPIO
|
|
static int atmel_pio4_direction_input(struct udevice *dev, unsigned offset)
|
|
{
|
|
struct at91_port_platdata *plat = dev_get_platdata(dev);
|
|
struct atmel_pio4_port *port_base = (atmel_pio4_port *)plat->base_addr;
|
|
u32 mask = 0x01 << offset;
|
|
u32 reg = ATMEL_PIO4_CFGR_FUNC_GPIO;
|
|
|
|
writel(mask, &port_base->mskr);
|
|
writel(reg, &port_base->cfgr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_pio4_direction_output(struct udevice *dev,
|
|
unsigned offset, int value)
|
|
{
|
|
struct at91_port_platdata *plat = dev_get_platdata(dev);
|
|
struct atmel_pio4_port *port_base = (atmel_pio4_port *)plat->base_addr;
|
|
u32 mask = 0x01 << offset;
|
|
u32 reg = ATMEL_PIO4_CFGR_FUNC_GPIO | ATMEL_PIO4_CFGR_DIR;
|
|
|
|
writel(mask, &port_base->mskr);
|
|
writel(reg, &port_base->cfgr);
|
|
|
|
if (value)
|
|
writel(mask, &port_base->sodr);
|
|
else
|
|
writel(mask, &port_base->codr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_pio4_get_value(struct udevice *dev, unsigned offset)
|
|
{
|
|
struct at91_port_platdata *plat = dev_get_platdata(dev);
|
|
struct atmel_pio4_port *port_base = (atmel_pio4_port *)plat->base_addr;
|
|
u32 mask = 0x01 << offset;
|
|
|
|
return (readl(&port_base->pdsr) & mask) ? 1 : 0;
|
|
}
|
|
|
|
static int atmel_pio4_set_value(struct udevice *dev,
|
|
unsigned offset, int value)
|
|
{
|
|
struct at91_port_platdata *plat = dev_get_platdata(dev);
|
|
struct atmel_pio4_port *port_base = (atmel_pio4_port *)plat->base_addr;
|
|
u32 mask = 0x01 << offset;
|
|
|
|
if (value)
|
|
writel(mask, &port_base->sodr);
|
|
else
|
|
writel(mask, &port_base->codr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_pio4_get_function(struct udevice *dev, unsigned offset)
|
|
{
|
|
struct at91_port_platdata *plat = dev_get_platdata(dev);
|
|
struct atmel_pio4_port *port_base = (atmel_pio4_port *)plat->base_addr;
|
|
u32 mask = 0x01 << offset;
|
|
|
|
writel(mask, &port_base->mskr);
|
|
|
|
return (readl(&port_base->cfgr) &
|
|
ATMEL_PIO4_CFGR_DIR) ? GPIOF_OUTPUT : GPIOF_INPUT;
|
|
}
|
|
|
|
static const struct dm_gpio_ops atmel_pio4_ops = {
|
|
.direction_input = atmel_pio4_direction_input,
|
|
.direction_output = atmel_pio4_direction_output,
|
|
.get_value = atmel_pio4_get_value,
|
|
.set_value = atmel_pio4_set_value,
|
|
.get_function = atmel_pio4_get_function,
|
|
};
|
|
|
|
static int atmel_pio4_probe(struct udevice *dev)
|
|
{
|
|
struct at91_port_platdata *plat = dev_get_platdata(dev);
|
|
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
|
|
uc_priv->bank_name = plat->bank_name;
|
|
uc_priv->gpio_count = ATMEL_PIO4_PINS_PER_BANK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_DRIVER(gpio_atmel_pio4) = {
|
|
.name = "gpio_atmel_pio4",
|
|
.id = UCLASS_GPIO,
|
|
.ops = &atmel_pio4_ops,
|
|
.probe = atmel_pio4_probe,
|
|
};
|
|
#endif
|