u-boot/include/configs/nas220.h
Tom Rini 968c6210e6 Convert CONFIG_JFFS2_DEV et al to Kconfig
This converts the following to Kconfig:
   CONFIG_JFFS2_DEV
   CONFIG_JFFS2_LZO
   CONFIG_JFFS2_NAND
   CONFIG_JFFS2_PART_OFFSET
   CONFIG_JFFS2_PART_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00

61 lines
1.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
*
* based on work from:
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*/
#ifndef _CONFIG_NAS220_H
#define _CONFIG_NAS220_H
/* power-on led, regulator, sata0, sata1 */
#define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
#define NAS220_GE_OE_VAL_HIGH (0)
#define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)))
#define NAS220_GE_OE_HIGH (~(0))
/* PHY related */
#define MV88E1116_LED_FCTRL_REG 10
#define MV88E1116_CPRSP_CR3_REG 21
#define MV88E1116_MAC_CTRL_REG 21
#define MV88E1116_PGADR_REG 22
#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
#include "mv-common.h"
/*
* Environment variables configurations
*/
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs=console=ttyS0,115200\0" \
"mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
"0x010000@0xa0000(env),"\
"0x500000@0xc0000(uimage),"\
"0x1a40000@0x5c0000(rootfs)\0" \
"mtdids=nand0=orion_nand\0"\
"autostart=no\0"\
"autoload=no\0"
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 8
#endif /* CONFIG_CMD_NET */
/*
* EFI partition
*/
#endif /* _CONFIG_NAS220_H */