mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-02 00:53:29 +08:00
ae3f467e84
This converts the following to Kconfig: CONFIG_AM335X_USB0 CONFIG_AM335X_USB0_MODE CONFIG_AM335X_USB1 CONFIG_AM335X_USB1_MODE We do this by introducing specific options for static configuration of USB0/USB1 in SPL rather than defining CONFIG_AM335X_USBx_MODE to the enum value being used. Furthermore, with how the code is used now we do not need to have OTG mode exposed as an option here, so remove that. Signed-off-by: Tom Rini <trini@konsulko.com>
223 lines
6.5 KiB
C
223 lines
6.5 KiB
C
/*
|
|
* am335x_evm.h
|
|
*
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#ifndef __CONFIG_BALTOS_H
|
|
#define __CONFIG_BALTOS_H
|
|
|
|
#include <linux/sizes.h>
|
|
#include <configs/ti_am335x_common.h>
|
|
|
|
/* Clock Defines */
|
|
#define V_OSCK 24000000 /* Clock output from T2 */
|
|
#define V_SCLK (V_OSCK)
|
|
|
|
/* FIT support */
|
|
#define CONFIG_SYS_BOOTM_LEN SZ_64M
|
|
|
|
#ifdef CONFIG_MTD_RAW_NAND
|
|
|
|
#define NANDARGS \
|
|
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
|
|
"nandargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"${mtdparts} " \
|
|
"root=${nandroot} " \
|
|
"rootfstype=${nandrootfstype}\0" \
|
|
"nandroot=ubi0:rootfs rw ubi.mtd=5\0" \
|
|
"nandrootfstype=ubifs rootwait=1\0" \
|
|
"nandboot=echo Booting from nand ...; " \
|
|
"run nandargs; " \
|
|
"setenv loadaddr 0x84000000; " \
|
|
"ubi part UBI; " \
|
|
"ubifsmount ubi0:kernel; " \
|
|
"ubifsload $loadaddr kernel-fit.itb;" \
|
|
"ubifsumount; " \
|
|
"bootm ${loadaddr}#conf${board_name}; " \
|
|
"if test $? -ne 0; then echo Using default FIT config; " \
|
|
"bootm ${loadaddr}; fi;\0"
|
|
#else
|
|
#define NANDARGS ""
|
|
#endif
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
DEFAULT_LINUX_BOOT_ENV \
|
|
"boot_fdt=try\0" \
|
|
"bootpart=0:2\0" \
|
|
"bootdir=/boot\0" \
|
|
"bootfile=zImage\0" \
|
|
"fdtfile=undefined\0" \
|
|
"console=ttyO0,115200n8\0" \
|
|
"partitions=" \
|
|
"uuid_disk=${uuid_gpt_disk};" \
|
|
"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
|
|
"optargs=\0" \
|
|
"mmcdev=0\0" \
|
|
"mmcroot=/dev/mmcblk0p2 ro\0" \
|
|
"usbroot=/dev/sda2 ro\0" \
|
|
"mmcrootfstype=ext4 rootwait\0" \
|
|
"usbrootfstype=ext4 rootwait\0" \
|
|
"rootpath=/export/rootfs\0" \
|
|
"nfsopts=nolock\0" \
|
|
"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
|
|
"::off\0" \
|
|
"ramroot=/dev/ram0 rw\0" \
|
|
"ramrootfstype=ext2\0" \
|
|
"mmcargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"${mtdparts} " \
|
|
"root=${mmcroot} " \
|
|
"rootfstype=${mmcrootfstype}\0" \
|
|
"usbargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"${mtdparts} " \
|
|
"root=${usbroot} " \
|
|
"rootfstype=${usbrootfstype}\0" \
|
|
"spiroot=/dev/mtdblock4 rw\0" \
|
|
"spirootfstype=jffs2\0" \
|
|
"spisrcaddr=0xe0000\0" \
|
|
"spiimgsize=0x362000\0" \
|
|
"spibusno=0\0" \
|
|
"spiargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"root=${spiroot} " \
|
|
"rootfstype=${spirootfstype}\0" \
|
|
"netargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"root=/dev/nfs " \
|
|
"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
|
|
"ip=dhcp\0" \
|
|
"bootenv=uEnv.txt\0" \
|
|
"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
|
|
"usbloadbootenv=load usb 0:1 ${loadaddr} ${bootenv}\0" \
|
|
"importbootenv=echo Importing environment from mmc ...; " \
|
|
"env import -t $loadaddr $filesize\0" \
|
|
"usbimportbootenv=echo Importing environment from USB ...; " \
|
|
"env import -t $loadaddr $filesize\0" \
|
|
"ramargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"root=${ramroot} " \
|
|
"rootfstype=${ramrootfstype}\0" \
|
|
"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
|
|
"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
|
|
"usbloadimage=load usb 0:1 ${loadaddr} kernel-fit.itb\0" \
|
|
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
|
|
"usbloados=run usbargs; " \
|
|
"bootm ${loadaddr}#conf${board_name}; " \
|
|
"if test $? -ne 0; then " \
|
|
"echo Using default FIT configuration; " \
|
|
"bootm ${loadaddr}; " \
|
|
"fi;\0" \
|
|
"mmcloados=run mmcargs; " \
|
|
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
|
"if run loadfdt; then " \
|
|
"bootz ${loadaddr} - ${fdtaddr}; " \
|
|
"else " \
|
|
"if test ${boot_fdt} = try; then " \
|
|
"bootz; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"else " \
|
|
"bootz; " \
|
|
"fi;\0" \
|
|
"usbboot=usb reset; " \
|
|
"if usb storage; then " \
|
|
"echo USB drive found;" \
|
|
"if run usbloadbootenv; then " \
|
|
"echo Loaded environment from ${bootenv};" \
|
|
"run usbimportbootenv;" \
|
|
"fi;" \
|
|
"if test -n $uenvcmd; then " \
|
|
"echo Running uenvcmd ...;" \
|
|
"run uenvcmd;" \
|
|
"fi;" \
|
|
"if run usbloadimage; then " \
|
|
"run usbloados;" \
|
|
"fi;" \
|
|
"fi;\0" \
|
|
"mmcboot=mmc dev ${mmcdev}; " \
|
|
"if mmc rescan; then " \
|
|
"echo SD/MMC found on device ${mmcdev};" \
|
|
"if run loadbootenv; then " \
|
|
"echo Loaded environment from ${bootenv};" \
|
|
"run importbootenv;" \
|
|
"fi;" \
|
|
"if test -n $uenvcmd; then " \
|
|
"echo Running uenvcmd ...;" \
|
|
"run uenvcmd;" \
|
|
"fi;" \
|
|
"if run loadimage; then " \
|
|
"run mmcloados;" \
|
|
"fi;" \
|
|
"fi;\0" \
|
|
"spiboot=echo Booting from spi ...; " \
|
|
"run spiargs; " \
|
|
"sf probe ${spibusno}:0; " \
|
|
"sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
|
|
"bootz ${loadaddr}\0" \
|
|
"netboot=echo Booting from network ...; " \
|
|
"setenv autoload no; " \
|
|
"dhcp; " \
|
|
"tftp ${loadaddr} ${bootfile}; " \
|
|
"tftp ${fdtaddr} ${fdtfile}; " \
|
|
"run netargs; " \
|
|
"bootz ${loadaddr} - ${fdtaddr}\0" \
|
|
"ramboot=echo Booting from ramdisk ...; " \
|
|
"run ramargs; " \
|
|
"bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
|
|
"findfdt=setenv fdtfile am335x-baltos.dtb\0" \
|
|
NANDARGS
|
|
/*DFUARGS*/
|
|
#endif
|
|
|
|
/* NS16550 Configuration */
|
|
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
|
|
#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
|
|
#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
|
|
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
|
|
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
|
|
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
|
|
|
|
/* PMIC support */
|
|
#define CONFIG_POWER_TPS65910
|
|
|
|
/* SPL */
|
|
#ifndef CONFIG_NOR_BOOT
|
|
|
|
#ifdef CONFIG_MTD_RAW_NAND
|
|
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
|
|
10, 11, 12, 13, 14, 15, 16, 17, \
|
|
18, 19, 20, 21, 22, 23, 24, 25, \
|
|
26, 27, 28, 29, 30, 31, 32, 33, \
|
|
34, 35, 36, 37, 38, 39, 40, 41, \
|
|
42, 43, 44, 45, 46, 47, 48, 49, \
|
|
50, 51, 52, 53, 54, 55, 56, 57, }
|
|
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
#define CONFIG_SYS_NAND_ECCBYTES 14
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
|
#endif
|
|
#endif
|
|
|
|
/* NAND support */
|
|
#ifdef CONFIG_MTD_RAW_NAND
|
|
#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
|
|
#endif
|
|
|
|
#endif /* ! __CONFIG_BALTOS_H */
|