u-boot/arch/arm/cpu/armv7/sunxi/clock_sun9i.c
Hans de Goede dacc0881ac sun9i: Add sun9i (A80) clock setup support
Add initial sun9i (A80) clock setup support, enough to get the uart + mmc
going.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-01-22 12:34:55 +01:00

69 lines
1.7 KiB
C

/*
* sun9i specific clock code
*
* (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/prcm.h>
#include <asm/arch/sys_proto.h>
void clock_init_uart(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
/* open the clock for uart */
setbits_le32(&ccm->apb1_gate,
CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT +
CONFIG_CONS_INDEX - 1));
/* deassert uart reset */
setbits_le32(&ccm->apb1_reset_cfg,
1 << (APB1_RESET_UART_SHIFT +
CONFIG_CONS_INDEX - 1));
/* Dup with clock_init_safe(), drop once sun9i SPL support lands */
writel(PLL4_CFG_DEFAULT, &ccm->pll4_periph0_cfg);
}
int clock_twi_onoff(int port, int state)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
if (port > 4)
return -1;
/* set the apb reset and clock gate for twi */
if (state) {
setbits_le32(&ccm->apb1_gate,
CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
setbits_le32(&ccm->apb1_reset_cfg,
1 << (APB1_RESET_UART_SHIFT + port));
} else {
clrbits_le32(&ccm->apb1_reset_cfg,
1 << (APB1_RESET_UART_SHIFT + port));
clrbits_le32(&ccm->apb1_gate,
CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
}
return 0;
}
unsigned int clock_get_pll4_periph0(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
uint32_t rval = readl(&ccm->pll4_periph0_cfg);
int n = ((rval & CCM_PLL4_CTRL_N_MASK) >> CCM_PLL4_CTRL_N_SHIFT);
int p = ((rval & CCM_PLL4_CTRL_P_MASK) >> CCM_PLL4_CTRL_P_SHIFT);
int m = ((rval & CCM_PLL4_CTRL_M_MASK) >> CCM_PLL4_CTRL_M_SHIFT) + 1;
const int k = 1;
return ((24000000 * n * k) >> p) / m;
}