mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-17 08:43:25 +08:00
d7a184d4a7
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be bound before relocation. However due to a bug in the DM core, the flag only takes effect when devices are statically declared via U_BOOT_DEVICE(). This bug has been fixed recently by commit "dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()", but with the fix, it has a side effect that all existing drivers that declared DM_FLAG_PRE_RELOC flag will be bound before relocation now. This may expose potential boot failure on some boards due to insufficient memory during the pre-relocation stage. To mitigate this potential impact, the following changes are implemented: - Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver only supports configuration from device tree (OF_CONTROL) - Keep DM_FLAG_PRE_RELOC flag in the driver only if the device is statically declared via U_BOOT_DEVICE() - Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for drivers that support both statically declared devices and configuration from device tree Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
112 lines
2.7 KiB
C
112 lines
2.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2016 Synopsys, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <timer.h>
|
|
#include <asm/arcregs.h>
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define NH_MODE (1 << 1)
|
|
|
|
/*
|
|
* ARC timer control registers are mapped to auxiliary address space.
|
|
* There are special ARC asm command to access that addresses.
|
|
* Therefore we use built-in functions to read from and write to timer
|
|
* control register.
|
|
*/
|
|
|
|
/* Driver private data. Contains timer id. Could be either 0 or 1. */
|
|
struct arc_timer_priv {
|
|
uint timer_id;
|
|
};
|
|
|
|
static int arc_timer_get_count(struct udevice *dev, u64 *count)
|
|
{
|
|
u32 val = 0;
|
|
struct arc_timer_priv *priv = dev_get_priv(dev);
|
|
|
|
switch (priv->timer_id) {
|
|
case 0:
|
|
val = read_aux_reg(ARC_AUX_TIMER0_CNT);
|
|
break;
|
|
case 1:
|
|
val = read_aux_reg(ARC_AUX_TIMER1_CNT);
|
|
break;
|
|
}
|
|
*count = timer_conv_64(val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int arc_timer_probe(struct udevice *dev)
|
|
{
|
|
int id;
|
|
struct arc_timer_priv *priv = dev_get_priv(dev);
|
|
|
|
/* Get registers offset and size */
|
|
id = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "reg", -1);
|
|
if (id < 0)
|
|
return -EINVAL;
|
|
|
|
if (id > 1)
|
|
return -ENXIO;
|
|
|
|
priv->timer_id = (uint)id;
|
|
|
|
/*
|
|
* In ARC core there're special registers (Auxiliary or AUX) in its
|
|
* separate memory space that are used for accessing some hardware
|
|
* features of the core. They are not mapped in normal memory space
|
|
* and also always have the same location regardless core configuration.
|
|
* Thus to simplify understanding of the programming model we chose to
|
|
* access AUX regs of Timer0 and Timer1 separately instead of using
|
|
* offsets from some base address.
|
|
*/
|
|
|
|
switch (priv->timer_id) {
|
|
case 0:
|
|
/* Disable timer if CPU is halted */
|
|
write_aux_reg(ARC_AUX_TIMER0_CTRL, NH_MODE);
|
|
/* Set max value for counter/timer */
|
|
write_aux_reg(ARC_AUX_TIMER0_LIMIT, 0xffffffff);
|
|
/* Set initial count value and restart counter/timer */
|
|
write_aux_reg(ARC_AUX_TIMER0_CNT, 0);
|
|
break;
|
|
case 1:
|
|
/* Disable timer if CPU is halted */
|
|
write_aux_reg(ARC_AUX_TIMER1_CTRL, NH_MODE);
|
|
/* Set max value for counter/timer */
|
|
write_aux_reg(ARC_AUX_TIMER1_LIMIT, 0xffffffff);
|
|
/* Set initial count value and restart counter/timer */
|
|
write_aux_reg(ARC_AUX_TIMER1_CNT, 0);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static const struct timer_ops arc_timer_ops = {
|
|
.get_count = arc_timer_get_count,
|
|
};
|
|
|
|
static const struct udevice_id arc_timer_ids[] = {
|
|
{ .compatible = "snps,arc-timer" },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(arc_timer) = {
|
|
.name = "arc_timer",
|
|
.id = UCLASS_TIMER,
|
|
.of_match = arc_timer_ids,
|
|
.probe = arc_timer_probe,
|
|
.ops = &arc_timer_ops,
|
|
.priv_auto_alloc_size = sizeof(struct arc_timer_priv),
|
|
};
|