u-boot/include/configs/usbarmory.h
Joe Hershberger ef0f2f5752 Move defaults from config_cmd_default.h to Kconfig
This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-25 22:18:34 -04:00

125 lines
3.2 KiB
C

/*
* USB armory MkI board configuration settings
* http://inversepath.com/usbarmory
*
* Copyright (C) 2015, Inverse Path
* Andrej Rosano <andrej@inversepath.com>
*
* SPDX-License-Identifier:|____GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_MX53
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_OF_LIBFDT
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_MXC_GPIO
#include <asm/arch/imx-regs.h>
#include <config_distro_defaults.h>
/* U-Boot commands */
#define CONFIG_CMD_MEMTEST
/* U-Boot environment */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
#define CONFIG_ENV_SIZE (8 * 1024)
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
/* U-Boot general configurations */
#define CONFIG_SYS_CBSIZE 512
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* UART */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
/* SD/MMC */
#define CONFIG_CMD_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_ESDHC_NUM 1
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
/* USB */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX5
#define CONFIG_USB_STORAGE
#define CONFIG_MXC_USB_PORT 1
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
/* I2C */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
/* Fuse */
#define CONFIG_CMD_FUSE
#define CONFIG_FSL_IIM
/* Linux boot */
#define CONFIG_LOADADDR 0x72000000
#define CONFIG_SYS_TEXT_BASE 0x77800000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_HOSTNAME usbarmory
#define CONFIG_BOOTCOMMAND \
"run distro_bootcmd; " \
"setenv bootargs console=${console} ${bootargs_default}; " \
"ext2load mmc 0:1 ${kernel_addr_r} /boot/uImage; " \
"ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; " \
"bootm ${kernel_addr_r} - ${fdt_addr_r}"
#define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
#include <config_distro_bootcmd.h>
#define MEM_LAYOUT_ENV_SETTINGS \
"kernel_addr_r=0x70800000\0" \
"fdt_addr_r=0x71000000\0" \
"scriptaddr=0x70800000\0" \
"pxefile_addr_r=0x70800000\0" \
"ramdisk_addr_r=0x73000000\0"
#define CONFIG_EXTRA_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
"bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0" \
"fdtfile=imx53-usbarmory.dtb\0" \
"console=ttymxc0,115200\0" \
BOOTENV
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM CSD0_BASE_ADDR
#define PHYS_SDRAM_SIZE (gd->ram_size)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#define CONFIG_SYS_MEMTEST_START 0x70000000
#define CONFIG_SYS_MEMTEST_END 0x90000000
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
#endif /* __CONFIG_H */