u-boot/include/configs/sh7757lcr.h
Nobuhiro Iwamatsu 6b87abe3ac sh: sh4: Remove CONFIG_SH4A definition from source code
SH4 and SH4A are compatible. But some instructions are different from these.
In Linux kernel, It is treated as a separate CPU, but for now, I think that
there is no need to divide especially in the U-Boot.

This removes CONFIG_SH4A definition from source code, SH4A is treated as SH4.
And this fix white space.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-01-09 12:47:15 +09:00

144 lines
4.0 KiB
C

/*
* Configuation settings for the sh7757lcr board
*
* Copyright (C) 2011 Renesas Solutions Corp.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __SH7757LCR_H
#define __SH7757LCR_H
#undef DEBUG
#define CONFIG_SH_32BIT 1
#define CONFIG_CPU_SH7757 1
#define CONFIG_SH7757LCR 1
#define CONFIG_SH7757LCR_DDR_ECC 1
#define CONFIG_SYS_TEXT_BASE 0x8ef80000
#define CONFIG_SYS_LDSCRIPT "board/renesas/sh7757lcr/u-boot.lds"
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_NET
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SF
#define CONFIG_CMD_RUN
#define CONFIG_CMD_SAVEENV
#define CONFIG_CMD_MD5SUM
#define CONFIG_MD5
#define CONFIG_CMD_LOADS
#define CONFIG_CMD_MMC
#define CONFIG_CMD_EXT2
#define CONFIG_DOS_PARTITION
#define CONFIG_MAC_PARTITION
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp"
#define CONFIG_VERSION_VARIABLE
#undef CONFIG_SHOW_BOOT_PROGRESS
/* MEMORY */
#define SH7757LCR_SDRAM_BASE (0x80000000)
#define SH7757LCR_SDRAM_SIZE (240 * 1024 * 1024)
#define SH7757LCR_SDRAM_ECC_SETTING 0x0f000000 /* 240MByte */
#define SH7757LCR_SDRAM_DVC_SIZE (16 * 1024 * 1024)
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_PBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE 512
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF2 1
#undef CONFIG_SYS_CONSOLE_INFO_QUIET
#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
#define CONFIG_SYS_MEMTEST_START (SH7757LCR_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
224 * 1024 * 1024)
#undef CONFIG_SYS_ALT_MEMTEST
#undef CONFIG_SYS_MEMTEST_SCRATCH
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_SYS_SDRAM_BASE (SH7757LCR_SDRAM_BASE)
#define CONFIG_SYS_SDRAM_SIZE (SH7757LCR_SDRAM_SIZE)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + \
(128 + 16) * 1024 * 1024)
#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
/* FLASH */
#define CONFIG_SYS_NO_FLASH
/* Ether */
#define CONFIG_SH_ETHER 1
#define CONFIG_SH_ETHER_USE_PORT 0
#define CONFIG_SH_ETHER_PHY_ADDR 1
#define CONFIG_SH_ETHER_CACHE_WRITEBACK 1
#define CONFIG_PHYLIB
#define CONFIG_BITBANGMII
#define CONFIG_BITBANGMII_MULTI
#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
#define SH7757LCR_ETHERNET_MAC_BASE_SPI 0x000b0000
#define SH7757LCR_SPI_SECTOR_SIZE (64 * 1024)
#define SH7757LCR_ETHERNET_MAC_BASE SH7757LCR_ETHERNET_MAC_BASE_SPI
#define SH7757LCR_ETHERNET_MAC_SIZE 17
#define SH7757LCR_ETHERNET_NUM_CH 2
#define CONFIG_BOARD_LATE_INIT
/* Gigabit Ether */
#define SH7757LCR_GIGA_ETHERNET_NUM_CH 2
/* SPI */
#define CONFIG_SH_SPI 1
#define CONFIG_SH_SPI_BASE 0xfe002000
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO 1
/* MMCIF */
#define CONFIG_MMC 1
#define CONFIG_GENERIC_MMC 1
#define CONFIG_SH_MMCIF 1
#define CONFIG_SH_MMCIF_ADDR 0xffcb0000
#define CONFIG_SH_MMCIF_CLK 48000000
/* SH7757 board */
#define SH7757LCR_SDRAM_PHYS_TOP 0x40000000
#define SH7757LCR_GRA_OFFSET 0x1f000000
#define SH7757LCR_PCIEBRG_ADDR_B0 0x000a0000
#define SH7757LCR_PCIEBRG_SIZE_B0 (64 * 1024)
#define SH7757LCR_PCIEBRG_ADDR 0x00090000
#define SH7757LCR_PCIEBRG_SIZE (96 * 1024)
/* ENV setting */
#define CONFIG_ENV_IS_EMBEDDED
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
#define CONFIG_ENV_ADDR (0x00080000)
#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
#define CONFIG_EXTRA_ENV_SETTINGS \
"netboot=bootp; bootm\0"
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 48000000
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4
#endif /* __SH7757LCR_H */