mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-25 21:24:21 +08:00
401d1c4f5d
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
346 lines
7.5 KiB
C
346 lines
7.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Atmel PIO4 device driver
|
|
*
|
|
* Copyright (C) 2015 Atmel Corporation
|
|
* Wenyou.Yang <wenyou.yang@atmel.com>
|
|
*/
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <fdtdec.h>
|
|
#include <malloc.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/gpio.h>
|
|
#include <linux/bitops.h>
|
|
#include <mach/gpio.h>
|
|
#include <mach/atmel_pio4.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static struct atmel_pio4_port *atmel_pio4_port_base(u32 port)
|
|
{
|
|
struct atmel_pio4_port *base = NULL;
|
|
|
|
switch (port) {
|
|
case AT91_PIO_PORTA:
|
|
base = (struct atmel_pio4_port *)ATMEL_BASE_PIOA;
|
|
break;
|
|
case AT91_PIO_PORTB:
|
|
base = (struct atmel_pio4_port *)ATMEL_BASE_PIOB;
|
|
break;
|
|
case AT91_PIO_PORTC:
|
|
base = (struct atmel_pio4_port *)ATMEL_BASE_PIOC;
|
|
break;
|
|
case AT91_PIO_PORTD:
|
|
base = (struct atmel_pio4_port *)ATMEL_BASE_PIOD;
|
|
break;
|
|
default:
|
|
printf("Error: Atmel PIO4: Failed to get PIO base of port#%d!\n",
|
|
port);
|
|
break;
|
|
}
|
|
|
|
return base;
|
|
}
|
|
|
|
static int atmel_pio4_config_io_func(u32 port, u32 pin,
|
|
u32 func, u32 config)
|
|
{
|
|
struct atmel_pio4_port *port_base;
|
|
u32 reg, mask;
|
|
|
|
if (pin >= ATMEL_PIO_NPINS_PER_BANK)
|
|
return -EINVAL;
|
|
|
|
port_base = atmel_pio4_port_base(port);
|
|
if (!port_base)
|
|
return -EINVAL;
|
|
|
|
mask = 1 << pin;
|
|
reg = func;
|
|
reg |= config;
|
|
|
|
writel(mask, &port_base->mskr);
|
|
writel(reg, &port_base->cfgr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int atmel_pio4_set_gpio(u32 port, u32 pin, u32 config)
|
|
{
|
|
return atmel_pio4_config_io_func(port, pin,
|
|
ATMEL_PIO_CFGR_FUNC_GPIO,
|
|
config);
|
|
}
|
|
|
|
int atmel_pio4_set_a_periph(u32 port, u32 pin, u32 config)
|
|
{
|
|
return atmel_pio4_config_io_func(port, pin,
|
|
ATMEL_PIO_CFGR_FUNC_PERIPH_A,
|
|
config);
|
|
}
|
|
|
|
int atmel_pio4_set_b_periph(u32 port, u32 pin, u32 config)
|
|
{
|
|
return atmel_pio4_config_io_func(port, pin,
|
|
ATMEL_PIO_CFGR_FUNC_PERIPH_B,
|
|
config);
|
|
}
|
|
|
|
int atmel_pio4_set_c_periph(u32 port, u32 pin, u32 config)
|
|
{
|
|
return atmel_pio4_config_io_func(port, pin,
|
|
ATMEL_PIO_CFGR_FUNC_PERIPH_C,
|
|
config);
|
|
}
|
|
|
|
int atmel_pio4_set_d_periph(u32 port, u32 pin, u32 config)
|
|
{
|
|
return atmel_pio4_config_io_func(port, pin,
|
|
ATMEL_PIO_CFGR_FUNC_PERIPH_D,
|
|
config);
|
|
}
|
|
|
|
int atmel_pio4_set_e_periph(u32 port, u32 pin, u32 config)
|
|
{
|
|
return atmel_pio4_config_io_func(port, pin,
|
|
ATMEL_PIO_CFGR_FUNC_PERIPH_E,
|
|
config);
|
|
}
|
|
|
|
int atmel_pio4_set_f_periph(u32 port, u32 pin, u32 config)
|
|
{
|
|
return atmel_pio4_config_io_func(port, pin,
|
|
ATMEL_PIO_CFGR_FUNC_PERIPH_F,
|
|
config);
|
|
}
|
|
|
|
int atmel_pio4_set_g_periph(u32 port, u32 pin, u32 config)
|
|
{
|
|
return atmel_pio4_config_io_func(port, pin,
|
|
ATMEL_PIO_CFGR_FUNC_PERIPH_G,
|
|
config);
|
|
}
|
|
|
|
int atmel_pio4_set_pio_output(u32 port, u32 pin, u32 value)
|
|
{
|
|
struct atmel_pio4_port *port_base;
|
|
u32 reg, mask;
|
|
|
|
if (pin >= ATMEL_PIO_NPINS_PER_BANK)
|
|
return -EINVAL;
|
|
|
|
port_base = atmel_pio4_port_base(port);
|
|
if (!port_base)
|
|
return -EINVAL;
|
|
|
|
mask = 0x01 << pin;
|
|
reg = ATMEL_PIO_CFGR_FUNC_GPIO | ATMEL_PIO_DIR_MASK;
|
|
|
|
writel(mask, &port_base->mskr);
|
|
writel(reg, &port_base->cfgr);
|
|
|
|
if (value)
|
|
writel(mask, &port_base->sodr);
|
|
else
|
|
writel(mask, &port_base->codr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int atmel_pio4_get_pio_input(u32 port, u32 pin)
|
|
{
|
|
struct atmel_pio4_port *port_base;
|
|
u32 reg, mask;
|
|
|
|
if (pin >= ATMEL_PIO_NPINS_PER_BANK)
|
|
return -EINVAL;
|
|
|
|
port_base = atmel_pio4_port_base(port);
|
|
if (!port_base)
|
|
return -EINVAL;
|
|
|
|
mask = 0x01 << pin;
|
|
reg = ATMEL_PIO_CFGR_FUNC_GPIO;
|
|
|
|
writel(mask, &port_base->mskr);
|
|
writel(reg, &port_base->cfgr);
|
|
|
|
return (readl(&port_base->pdsr) & mask) ? 1 : 0;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(DM_GPIO)
|
|
|
|
struct atmel_pioctrl_data {
|
|
u32 nbanks;
|
|
};
|
|
|
|
struct atmel_pio4_plat {
|
|
struct atmel_pio4_port *reg_base;
|
|
};
|
|
|
|
static struct atmel_pio4_port *atmel_pio4_bank_base(struct udevice *dev,
|
|
u32 bank)
|
|
{
|
|
struct atmel_pio4_plat *plat = dev_get_plat(dev);
|
|
struct atmel_pio4_port *port_base =
|
|
(struct atmel_pio4_port *)((u32)plat->reg_base +
|
|
ATMEL_PIO_BANK_OFFSET * bank);
|
|
|
|
return port_base;
|
|
}
|
|
|
|
static int atmel_pio4_direction_input(struct udevice *dev, unsigned offset)
|
|
{
|
|
u32 bank = ATMEL_PIO_BANK(offset);
|
|
u32 line = ATMEL_PIO_LINE(offset);
|
|
struct atmel_pio4_port *port_base = atmel_pio4_bank_base(dev, bank);
|
|
u32 mask = BIT(line);
|
|
|
|
writel(mask, &port_base->mskr);
|
|
|
|
clrbits_le32(&port_base->cfgr,
|
|
ATMEL_PIO_CFGR_FUNC_MASK | ATMEL_PIO_DIR_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_pio4_direction_output(struct udevice *dev,
|
|
unsigned offset, int value)
|
|
{
|
|
u32 bank = ATMEL_PIO_BANK(offset);
|
|
u32 line = ATMEL_PIO_LINE(offset);
|
|
struct atmel_pio4_port *port_base = atmel_pio4_bank_base(dev, bank);
|
|
u32 mask = BIT(line);
|
|
|
|
writel(mask, &port_base->mskr);
|
|
|
|
clrsetbits_le32(&port_base->cfgr,
|
|
ATMEL_PIO_CFGR_FUNC_MASK, ATMEL_PIO_DIR_MASK);
|
|
|
|
if (value)
|
|
writel(mask, &port_base->sodr);
|
|
else
|
|
writel(mask, &port_base->codr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_pio4_get_value(struct udevice *dev, unsigned offset)
|
|
{
|
|
u32 bank = ATMEL_PIO_BANK(offset);
|
|
u32 line = ATMEL_PIO_LINE(offset);
|
|
struct atmel_pio4_port *port_base = atmel_pio4_bank_base(dev, bank);
|
|
u32 mask = BIT(line);
|
|
|
|
return (readl(&port_base->pdsr) & mask) ? 1 : 0;
|
|
}
|
|
|
|
static int atmel_pio4_set_value(struct udevice *dev,
|
|
unsigned offset, int value)
|
|
{
|
|
u32 bank = ATMEL_PIO_BANK(offset);
|
|
u32 line = ATMEL_PIO_LINE(offset);
|
|
struct atmel_pio4_port *port_base = atmel_pio4_bank_base(dev, bank);
|
|
u32 mask = BIT(line);
|
|
|
|
if (value)
|
|
writel(mask, &port_base->sodr);
|
|
else
|
|
writel(mask, &port_base->codr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_pio4_get_function(struct udevice *dev, unsigned offset)
|
|
{
|
|
u32 bank = ATMEL_PIO_BANK(offset);
|
|
u32 line = ATMEL_PIO_LINE(offset);
|
|
struct atmel_pio4_port *port_base = atmel_pio4_bank_base(dev, bank);
|
|
u32 mask = BIT(line);
|
|
|
|
writel(mask, &port_base->mskr);
|
|
|
|
return (readl(&port_base->cfgr) &
|
|
ATMEL_PIO_DIR_MASK) ? GPIOF_OUTPUT : GPIOF_INPUT;
|
|
}
|
|
|
|
static const struct dm_gpio_ops atmel_pio4_ops = {
|
|
.direction_input = atmel_pio4_direction_input,
|
|
.direction_output = atmel_pio4_direction_output,
|
|
.get_value = atmel_pio4_get_value,
|
|
.set_value = atmel_pio4_set_value,
|
|
.get_function = atmel_pio4_get_function,
|
|
};
|
|
|
|
static int atmel_pio4_bind(struct udevice *dev)
|
|
{
|
|
return dm_scan_fdt_dev(dev);
|
|
}
|
|
|
|
static int atmel_pio4_probe(struct udevice *dev)
|
|
{
|
|
struct atmel_pio4_plat *plat = dev_get_plat(dev);
|
|
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
struct atmel_pioctrl_data *pioctrl_data;
|
|
struct clk clk;
|
|
fdt_addr_t addr_base;
|
|
u32 nbanks;
|
|
int ret;
|
|
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_enable(&clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
clk_free(&clk);
|
|
|
|
addr_base = dev_read_addr(dev);
|
|
if (addr_base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
plat->reg_base = (struct atmel_pio4_port *)addr_base;
|
|
|
|
pioctrl_data = (struct atmel_pioctrl_data *)dev_get_driver_data(dev);
|
|
nbanks = pioctrl_data->nbanks;
|
|
|
|
uc_priv->bank_name = fdt_get_name(gd->fdt_blob, dev_of_offset(dev),
|
|
NULL);
|
|
uc_priv->gpio_count = nbanks * ATMEL_PIO_NPINS_PER_BANK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The number of banks can be different from a SoC to another one.
|
|
* We can have up to 16 banks.
|
|
*/
|
|
static const struct atmel_pioctrl_data atmel_sama5d2_pioctrl_data = {
|
|
.nbanks = 4,
|
|
};
|
|
|
|
static const struct udevice_id atmel_pio4_ids[] = {
|
|
{
|
|
.compatible = "atmel,sama5d2-gpio",
|
|
.data = (ulong)&atmel_sama5d2_pioctrl_data,
|
|
},
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(gpio_atmel_pio4) = {
|
|
.name = "gpio_atmel_pio4",
|
|
.id = UCLASS_GPIO,
|
|
.ops = &atmel_pio4_ops,
|
|
.probe = atmel_pio4_probe,
|
|
.bind = atmel_pio4_bind,
|
|
.of_match = atmel_pio4_ids,
|
|
.plat_auto = sizeof(struct atmel_pio4_plat),
|
|
};
|
|
|
|
#endif
|