u-boot/arch/arm/mach-imx/spl.c
Stefan Agner 962c78b1df imx: use BOOT_DEVICE_BOARD instead of UART
i.MX 6 serial downloader is not necessarily booting via UART but can
also boot from USB. In fact only some i.MX chips have serial
downloader support via UART (e.g. 6UL/ULL and Vybrid) but all of
them have serial downloader support via USB. Use the more appropriate
BOOT_DEVICE_BOARD define which is used for ROM provided recovery
mechanisms in general.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-08-25 13:31:47 +02:00

129 lines
3.3 KiB
C

/*
* Copyright (C) 2014 Gateworks Corporation
* Copyright (C) 2011-2012 Freescale Semiconductor, Inc.
*
* Author: Tim Harvey <tharvey@gateworks.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#include <asm/spl.h>
#include <spl.h>
#include <asm/mach-imx/hab.h>
#if defined(CONFIG_MX6)
/* determine boot device from SRC_SBMR1 (BOOT_CFG[4:1]) or SRC_GPR9 register */
u32 spl_boot_device(void)
{
unsigned int bmode = readl(&src_base->sbmr2);
u32 reg = imx6_src_get_boot_mode();
/*
* Check for BMODE if serial downloader is enabled
* BOOT_MODE - see IMX6DQRM Table 8-1
*/
if (((bmode >> 24) & 0x03) == 0x01) /* Serial Downloader */
return BOOT_DEVICE_BOARD;
/* BOOT_CFG1[7:4] - see IMX6DQRM Table 8-8 */
switch ((reg & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) {
/* EIM: See 8.5.1, Table 8-9 */
case IMX6_BMODE_EMI:
/* BOOT_CFG1[3]: NOR/OneNAND Selection */
switch ((reg & IMX6_BMODE_EMI_MASK) >> IMX6_BMODE_EMI_SHIFT) {
case IMX6_BMODE_ONENAND:
return BOOT_DEVICE_ONENAND;
case IMX6_BMODE_NOR:
return BOOT_DEVICE_NOR;
break;
}
/* Reserved: Used to force Serial Downloader */
case IMX6_BMODE_RESERVED:
return BOOT_DEVICE_BOARD;
/* SATA: See 8.5.4, Table 8-20 */
case IMX6_BMODE_SATA:
return BOOT_DEVICE_SATA;
/* Serial ROM: See 8.5.5.1, Table 8-22 */
case IMX6_BMODE_SERIAL_ROM:
/* BOOT_CFG4[2:0] */
switch ((reg & IMX6_BMODE_SERIAL_ROM_MASK) >>
IMX6_BMODE_SERIAL_ROM_SHIFT) {
case IMX6_BMODE_ECSPI1:
case IMX6_BMODE_ECSPI2:
case IMX6_BMODE_ECSPI3:
case IMX6_BMODE_ECSPI4:
case IMX6_BMODE_ECSPI5:
return BOOT_DEVICE_SPI;
case IMX6_BMODE_I2C1:
case IMX6_BMODE_I2C2:
case IMX6_BMODE_I2C3:
return BOOT_DEVICE_I2C;
}
break;
/* SD/eSD: 8.5.3, Table 8-15 */
case IMX6_BMODE_SD:
case IMX6_BMODE_ESD:
return BOOT_DEVICE_MMC1;
/* MMC/eMMC: 8.5.3 */
case IMX6_BMODE_MMC:
case IMX6_BMODE_EMMC:
return BOOT_DEVICE_MMC1;
/* NAND Flash: 8.5.2, Table 8-10 */
case IMX6_BMODE_NAND:
return BOOT_DEVICE_NAND;
}
return BOOT_DEVICE_NONE;
}
#endif
#if defined(CONFIG_SPL_MMC_SUPPORT)
/* called from spl_mmc to see type of boot mode for storage (RAW or FAT) */
u32 spl_boot_mode(const u32 boot_device)
{
switch (spl_boot_device()) {
/* for MMC return either RAW or FAT mode */
case BOOT_DEVICE_MMC1:
case BOOT_DEVICE_MMC2:
#if defined(CONFIG_SPL_FAT_SUPPORT)
return MMCSD_MODE_FS;
#elif defined(CONFIG_SUPPORT_EMMC_BOOT)
return MMCSD_MODE_EMMCBOOT;
#else
return MMCSD_MODE_RAW;
#endif
break;
default:
puts("spl: ERROR: unsupported device\n");
hang();
}
}
#endif
#if defined(CONFIG_SECURE_BOOT)
__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
typedef void __noreturn (*image_entry_noargs_t)(void);
image_entry_noargs_t image_entry =
(image_entry_noargs_t)(unsigned long)spl_image->entry_point;
debug("image entry point: 0x%lX\n", spl_image->entry_point);
/* HAB looks for the CSF at the end of the authenticated data therefore,
* we need to subtract the size of the CSF from the actual filesize */
if (authenticate_image(spl_image->load_addr,
spl_image->size - CONFIG_CSF_SIZE)) {
image_entry();
} else {
puts("spl: ERROR: image authentication unsuccessful\n");
hang();
}
}
#endif