mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-28 07:03:31 +08:00
691d719db7
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
||
|---|---|---|
| .. | ||
| dragonboard820c.c | ||
| head.S | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| readme.txt | ||
| u-boot.lds | ||
# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
================================================================================
What is working (enough to boot a distro from SD card)
================================================================================
- UART
- SD card
- PSCI reset
- Environment in EXT4 partition 1 in SD card (check defconfig for details)
dont forget to insert the card in the SD slot before booting if you
are going to make mods to the environment
================================================================================
Build & Run instructions
================================================================================
1) Install mkbootimg and dtbTool from Codeaurora:
git://codeaurora.org/quic/kernel/skales
commit 8492547e404e969262d9070dee9bdd15668bb70f worked for me.
2) Setup CROSS_COMPILE to aarch64 compiler or if you use ccache just do
CROSS_COMPILE="ccache aarch64-linux-gnu-"
3) cd to the u-boot tree
$ make dragonboard820c_config
$ make -j `nproc`
4) generate fake, empty ramdisk (can have 0 bytes)
$ touch rd
5) Generate qualcomm device tree table with dtbTool
$ dtbTool -o dt.img arch/arm/dts
6) Generate Android boot image with mkbootimg:
$ mkbootimg --kernel=u-boot-dtb.bin \
--output=u-boot.img \
--dt=dt.img \
--pagesize 4096 \
--base 0x80000000 \
--ramdisk=rd \
--cmdline=""
7) Reboot the board into fastboot mode
- plug the board micro-usb to your laptop usb host.
- reboot the board with vol- button pressed
8) Boot the uboot image using fastboot
$ fastboot boot u-boot.img
or flash it to the UFS drive boot partition:
$ fastboot flash boot u-boot.img
$ fastboot reboot
================================================================================
To boot a linux kernel from SDHCI with the ROOTFS on an NFS share:
================================================================================
1) create an EXT4 partition on the SD card (must be partition #1)
2) build the kernel image and dtb (documented extensively somewhere else)
3) copy the drivers to the NFS partition (ie: 192.168.1.2 /exports/db820c-rootfs)
4) add the u-boot headers to the image:
$ mkimage -A arm64 \
-O linux \
-C none \
-T kernel \
-a 0x80080000 \
-e 0x80080000 \
-n Dragonboard820c \
-d $kernel/arch/arm64/boot/Image \
uImage
5) copy the generated uImage and the device tree binary to the SD card EXT4
partition
$ cp uImage /mnt/boot/
$ cp apq8096-db820c.dtb /mnt/boot/
6) on the SD card create /extlinux/extlinux.conf as follows:
default nfs
prompt 1
timeout 10
LABEL nfs
MENU NFS entry
LINUX /uImage
FDT /apq8096-db820c.dtb
APPEND root=/dev/nfs rw \
nfsroot=192.168.1.2:/exports/db829c-rootfs,v3,tcp \
rootwait \
ip=dhcp consoleblank=0 \
console=tty0 \
console=ttyMSM0,115200n8 \
earlyprintk earlycon=msm_serial_dm,0x75b0000 \
androidboot.bootdevice=624000.ufshc \
androidboot.verifiedbootstate=orange \
androidboot.ver0
7) remove the SD card from the laptop and insert it back to the db820 board.
the SD card EXT4 partition#1 should contain:
/uImage
/apq8096-db820c.dtb
/extlinux/extlinux.conf
8) reboot the db820 board
================================================================================
Successful boot sequence
================================================================================
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.XF.1.0-00301
S - IMAGE_VARIANT_STRING=M8996LAB
S - OEM_IMAGE_VERSION_STRING=crm-ubuntu68
S - Boot Interface: UFS
S - Secure Boot: Off
S - Boot Config @ 0x00076044 = 0x000001c9
S - JTAG ID @ 0x000760f4 = 0x4003e0e1
S - OEM ID @ 0x000760f8 = 0x00000000
S - Serial Number @ 0x00074138 = 0x2e8844ce
S - OEM Config Row 0 @ 0x00074188 = 0x0000000000000000
S - OEM Config Row 1 @ 0x00074190 = 0x0000000000000000
S - Feature Config Row 0 @ 0x000741a0 = 0x0050000010000100
S - Feature Config Row 1 @ 0x000741a8 = 0x00fff00001ffffff
S - Core 0 Frequency, 1228 MHz
B - 0 - PBL, Start
B - 10412 - bootable_media_detect_entry, Start
B - 47480 - bootable_media_detect_success, Start
B - 47481 - elf_loader_entry, Start
B - 49027 - auth_hash_seg_entry, Start
B - 49129 - auth_hash_seg_exit, Start
B - 82403 - elf_segs_hash_verify_entry, Start
B - 84905 - PBL, End
B - 86955 - SBL1, Start
B - 182969 - usb: hs_phy_nondrive_start
B - 183305 - usb: PLL lock success - 0x3
B - 186294 - usb: hs_phy_nondrive_finish
B - 190442 - boot_flash_init, Start
D - 30 - boot_flash_init, Delta
B - 197548 - sbl1_ddr_set_default_params, Start
D - 30 - sbl1_ddr_set_default_params, Delta
B - 205509 - boot_config_data_table_init, Start
D - 200659 - boot_config_data_table_init, Delta - (60 Bytes)
B - 410713 - CDT Version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
B - 415410 - Image Load, Start
D - 22570 - PMIC Image Loaded, Delta - (37272 Bytes)
B - 437980 - pm_device_init, Start
B - 443744 - PON REASON:PM0:0x200000061 PM1:0x200000021
B - 480161 - PM_SET_VAL:Skip
D - 40016 - pm_device_init, Delta
B - 482083 - pm_driver_init, Start
D - 2928 - pm_driver_init, Delta
B - 488671 - pm_sbl_chg_init, Start
D - 91 - pm_sbl_chg_init, Delta
B - 495442 - vsense_init, Start
D - 0 - vsense_init, Delta
B - 505171 - Pre_DDR_clock_init, Start
D - 396 - Pre_DDR_clock_init, Delta
B - 509045 - ddr_initialize_device, Start
B - 512766 - 8996 v3.x detected, Max frequency = 1.8 GHz
B - 522373 - ddr_initialize_device, Delta
B - 522404 - DDR ID, Rank 0, Rank 1, 0x6, 0x300, 0x300
B - 526247 - Basic DDR tests done
B - 594994 - clock_init, Start
D - 274 - clock_init, Delta
B - 598349 - Image Load, Start
D - 4331 - QSEE Dev Config Image Loaded, Delta - (46008 Bytes)
B - 603808 - Image Load, Start
D - 5338 - APDP Image Loaded, Delta - (0 Bytes)
B - 612409 - usb: UFS Serial - 2f490ecf
B - 616801 - usb: fedl, vbus_low
B - 620431 - Image Load, Start
D - 55418 - QSEE Image Loaded, Delta - (1640572 Bytes)
B - 675849 - Image Load, Start
D - 2013 - SEC Image Loaded, Delta - (4096 Bytes)
B - 683413 - sbl1_efs_handle_cookies, Start
D - 457 - sbl1_efs_handle_cookies, Delta
B - 691892 - Image Load, Start
D - 14396 - QHEE Image Loaded, Delta - (254184 Bytes)
B - 706319 - Image Load, Start
D - 14061 - RPM Image Loaded, Delta - (223900 Bytes)
B - 721111 - Image Load, Start
D - 3233 - STI Image Loaded, Delta - (0 Bytes)
B - 727913 - Image Load, Start
D - 34709 - APPSBL Image Loaded, Delta - (748716 Bytes)
B - 762713 - SBL1, End
D - 680028 - SBL1, Delta
S - Flash Throughput, 94000 KB/s (2959024 Bytes, 31250 us)
S - DDR Frequency, 1017 MHz
Android Bootloader - UART_DM Initialized!!!
[0] BUILD_VERSION=
[0] BUILD_DATE=16:07:51 - Nov 17 2017
[0] welcome to lk
[10] platform_init()
[10] target_init()
[10] RPM GLink Init
[10] Opening RPM Glink Port success
[10] Opening SSR Glink Port success
[20] Glink Connection between APPS and RPM established
[20] Glink Connection between APPS and RPM established
[40] UFS init success
[80] Qseecom Init Done in Appsbl
[80] secure app region addr=0x86600000 size=0x2200000[90] TZ App region notif returned with status:0 addr:86600000 size:35651584
[100] TZ App log region register returned with status:0 addr:916d4000 size:4096
[100] Qseecom TZ Init Done in Appsbl
[120] Loading cmnlib done
[120] qseecom_start_app: Loading app keymaster for the first time
[150] <8>keymaster: "\"KEYMASTER Init \""
[160] Selected panel: none
Skip panel configuration
[160] pm8x41_get_is_cold_boot: cold boot
[170] boot_verifier: Device is in ORANGE boot state.
[180] Device is unlocked! Skipping verification...
[180] Loading (boot) image (348160): start
[190] Loading (boot) image (348160): done
[190] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
[200] Your device has been unlocked and cant be trusted.
Wait for 5 seconds before proceeding
[5200] mdtp: mdtp_img loaded
[5210] mdtp: is_test_mode: test mode is set to 1
[5210] mdtp: read_metadata: SUCCESS
[5230] LK SEC APP Handle: 0x1
[5230] Return value from recv_data: 14
[5240] Return value from recv_data: 14
[5250] Return value from recv_data: 14
[5260] DTB Total entry: 1, DTB version: 3
[5260] Using DTB entry 0x00000123/00000000/0x00000018/0 for device 0x00000123/00030001/0x00010018/0
[5270] cmdline: androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=2f490ecf androidboot.baseband=apq mdss_mdp.panel=0
[5290] Updating device tree: start
[5290] Updating device tree: done
[5290] Return value from recv_data: 14
[5300] RPM GLINK UnInit
[5300] Qseecom De-Init Done in Appsbl
[5300] booting linux @ 0x80080000, ramdisk @ 0x82200000 (0), tags/device tree @ 0x82000000
[5310] Jumping to kernel via monitor
U-Boot 2017.11-00145-ge895117 (Nov 29 2017 - 10:04:06 +0100)
Qualcomm-DragonBoard 820C
DRAM: 3 GiB
PSCI: v1.0
MMC: sdhci@74a4900: 0
In: serial@75b0000
Out: serial@75b0000
Err: serial@75b0000
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
433 bytes read in 71 ms (5.9 KiB/s)
1: nfs root
Retrieving file: /uImage
19397184 bytes read in 2024 ms (9.1 MiB/s)
append: root=/dev/nfs rw nfsroot=192.168.1.2:/db820c/rootfs,v3,tcp rootwait ip=dhcp consoleblank=0 console=tty0 console=ttyMSM0,115200n8 earlyprintk earlycon=msm_serial_dm,0x75b0000 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.ver0
Retrieving file: /apq8096-db820c.dtb
38134 bytes read in 37 ms (1005.9 KiB/s)
## Booting kernel from Legacy Image at 95000000 ...
Image Name: Dragonboard820c
Image Type: AArch64 Linux Kernel Image (uncompressed)
Data Size: 19397120 Bytes = 18.5 MiB
Load Address: 80080000
Entry Point: 80080000
Verifying Checksum ... OK
## Flattened Device Tree blob at 93000000
Booting using the fdt blob at 0x93000000
Loading Kernel Image ... OK
Using Device Tree in place at 0000000093000000, end 000000009300c4f5
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.11.3-30039-g5a922a1 (jramirez@igloo) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #1 SMP PREEMPT Wed Oct 18 10:21:11 CEST 2017
[ 0.000000] Boot CPU: AArch64 Processor [511f2112]
[ 0.000000] earlycon: msm_serial_dm0 at MMIO 0x00000000075b0000 (options '')
[ 0.000000] bootconsole [msm_serial_dm0] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: reserved mem: OVERLAP DETECTED!
[ 0.000000] adsp@8ea00000 (0x000000008ea00000--0x0000000090400000) overlaps with gpu@8f200000 (0x000000008f200000--0x000000008f300000)
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000008f200000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node gpu@8f200000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000090400000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node venus@90400000, compatible id shared-dma-pool
[ 0.000000] cma: Reserved 128 MiB at 0x00000000b8000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000bfffffff]
[ 0.000000] NUMA: Adding memblock [0x80000000 - 0x857fffff] on node 0
[ 0.000000] NUMA: Adding memblock [0x91800000 - 0xbfffffff] on node 0
[ 0.000000] NUMA: Initmem setup node 0 [mem 0x80000000-0xbfffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xb7fb6680-0xb7fb817f]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000857fffff]
[ 0.000000] node 0: [mem 0x0000000091800000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] percpu: Embedded 23 pages/cpu @ffff8000de9a3000 s57240 r8192 d28776 u94208
[ 0.000000] pcpu-alloc: s57240 r8192 d28776 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 720293
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/nfs rw nfsroot=192.168.1.2:/db820c/rootfs,v3,tcp rootwait ip=dhcp consoleblank=0
console=tty0 console=ttyMSM0,115200n8 earlyprintk earlycon=msm_serial_dm,0x75b0000 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange a
ndroidboot.ver0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] software IO TLB [mem 0xd3fff000-0xd7fff000] (64MB) mapped at [ffff800053fff000-ffff800057ffefff]
[ 0.000000] Memory: 2644172K/2926908K available (11196K kernel code, 1470K rwdata, 5132K rodata, 1088K init, 449K bss, 151664K reserved, 131072K cma-reser
ved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
[ 0.000000] .text : 0xffff000008080000 - 0xffff000008b70000 ( 11200 KB)
[ 0.000000] .rodata : 0xffff000008b70000 - 0xffff000009080000 ( 5184 KB)
[ 0.000000] .init : 0xffff000009080000 - 0xffff000009190000 ( 1088 KB)
[ 0.000000] .data : 0xffff000009190000 - 0xffff0000092ffa00 ( 1471 KB)
[ 0.000000] .bss : 0xffff0000092ffa00 - 0xffff00000937014c ( 450 KB)
[ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
[ 0.000000] 0xffff7e0000000000 - 0xffff7e00037a93c0 ( 55 MB actual)
[ 0.000000] memory : 0xffff800000000000 - 0xffff8000dea4f000 ( 3562 MB)
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009c00000
[ 0.000000] GICv2m: range[mem 0x09bd0000-0x09bd0fff], SPI[544:639]
[ 0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000002] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[....]
Some kernel information:
root@linaro-developer:~# cat /proc/cpuinfo
processor : 0
BogoMIPS : 38.40
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0x1
CPU part : 0x211
CPU revision : 2
processor : 1
BogoMIPS : 38.40
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0x1
CPU part : 0x211
CPU revision : 2
processor : 2
BogoMIPS : 38.40
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0x1
CPU part : 0x205
CPU revision : 2
processor : 3
BogoMIPS : 38.40
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0x1
CPU part : 0x205
CPU revision : 2
root@linaro-developer:~# uname -a
Linux linaro-developer 4.11.3-30039-g5a922a1 #1 SMP PREEMPT Wed Oct 18 10:21:11 CEST 2017 aarch64 GNU/Linux
root@linaro-developer:~# cat /proc/cmdline
root=/dev/nfs rw nfsroot=192.168.1.2:/db820c/rootfs,v3,tcp rootwait ip=dhcp consoleblank=0 console=tty0 console=ttyMSM0,115200n8 earlyprintk earlycon=msm_serial_dm,0x75b0000 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.ver0
root@linaro-developer:~# cat /proc/meminfo
MemTotal: 2776332 kB
MemFree: 2593696 kB
MemAvailable: 2561432 kB
Buffers: 0 kB
Cached: 94744 kB
SwapCached: 0 kB
Active: 43888 kB
Inactive: 72972 kB
Active(anon): 22968 kB
Inactive(anon): 24616 kB
Active(file): 20920 kB
Inactive(file): 48356 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 22120 kB
Mapped: 29284 kB
Shmem: 25468 kB
Slab: 32876 kB
SReclaimable: 12924 kB
SUnreclaim: 19952 kB
KernelStack: 2144 kB
PageTables: 928 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 1388164 kB
Committed_AS: 204192 kB
VmallocTotal: 135290290112 kB
VmallocUsed: 0 kB
VmallocChunk: 0 kB
AnonHugePages: 2048 kB
ShmemHugePages: 0 kB
ShmemPmdMapped: 0 kB
CmaTotal: 131072 kB
CmaFree: 130356 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB