mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-16 16:23:33 +08:00
4387cf1ae1
Add common code for o2dnt and o2dnt2 based boards and add different board configuration files for O2D, O2I, O2DNT2, O2D300, O2MNT and O3DNT boards. Signed-off-by: Anatolij Gustschin <agust@denx.de>
73 lines
2.3 KiB
C
73 lines
2.3 KiB
C
/*
|
|
* (C) Copyright 2012
|
|
* DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*/
|
|
|
|
/*
|
|
* Valid values for CONFIG_SYS_TEXT_BASE are:
|
|
* 0xFC000000 boot low boot high (standard configuration)
|
|
* 0x00100000 boot from RAM (for testing only)
|
|
*/
|
|
#ifndef CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */
|
|
#endif
|
|
|
|
/* Board specific flash config */
|
|
#define CONFIG_SYS_FLASH_BASE 0xfc000000
|
|
#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */
|
|
/* max number of sectors on one chip */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512
|
|
|
|
/*
|
|
* Include common defines for all ifm boards
|
|
*/
|
|
#include "o2dnt-common.h"
|
|
|
|
/* additional commands */
|
|
#define CONFIG_CMD_ITEST
|
|
|
|
/*
|
|
* GPIO configuration:
|
|
* CS1 SDRAM activate + no CAN + no PCI
|
|
*/
|
|
#define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004
|
|
|
|
/* Other board specific configs */
|
|
#define CONFIG_SYS_BOOTCS_CFG 0x00057d01
|
|
#define CONFIG_SYS_RESET_ADDRESS 0xfc000000
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */
|
|
|
|
#define CONFIG_BOARD_NAME "o2dnt2"
|
|
#define CONFIG_BOARD_BOOTCMD "run flash_self"
|
|
#define CONFIG_BOARD_MEM_LIMIT xstr(126)
|
|
#define BOARD_POST_CRC32_END xstr(0x01000000)
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
CONFIG_IFM_DEFAULT_ENV_SETTINGS \
|
|
CONFIG_IFM_DEFAULT_ENV_OLD \
|
|
CONFIG_IFM_DEFAULT_ENV_NEW \
|
|
"linbot=fc060000\0" \
|
|
"lintop=fc15ffff\0" \
|
|
"rambot=fc160000\0" \
|
|
"ramtop=fc55ffff\0" \
|
|
"jffbot=fc560000\0" \
|
|
"jfftop=fce5ffff\0" \
|
|
"ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \
|
|
"ubotop=fc03ffff\0" \
|
|
"calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0" \
|
|
"calbot=fce60000\0" \
|
|
"caltop=fcffffff\0" \
|
|
"progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};" \
|
|
"cp.b ${fileaddr} ${calbot} ${filesize}\0" \
|
|
"kernel_addr=0xfc060000\0" \
|
|
"ramdisk_addr=0xfc160000\0" \
|
|
"master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \
|
|
"mw f0000b04 ${IOpin};mw f0000b10 0x20\0"
|