u-boot/arch/arm/mach-keystone
Nishanth Menon 4361220dae ARM: K2G: DDR3: Fix up priv ID for MPU
For ECC enabled DDR, we use EDMA to reset all memory values to 0. For
K2E/L/H/K the priv ID of 8 was indicative of ARM, but that is not the
case for K2G, where it is 1.

Unfortunately, ddr3 code had hard coded the privID and had missed
identification previously. Fix the same, else unforeseen behavior can
be expected in our reset of DDR contents to 0 for ECC enablement.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:10 -05:00
..
include/mach ARM: keystone: rename clk_get_rate() to ks_clk_get_rate() 2016-10-08 09:33:13 -04:00
clock.c ARM: keystone2: PLL: Enable glitch free initialization sequence 2016-11-13 15:54:36 -05:00
cmd_clock.c ARM: keystone: rename clk_get_rate() to ks_clk_get_rate() 2016-10-08 09:33:13 -04:00
cmd_ddr3.c ARM: keystone: move SoC sources to mach-keystone 2015-02-21 08:23:52 -05:00
cmd_mon.c ARM: keystone2: Add support for parsing monitor header 2016-10-01 20:05:10 -04:00
cmd_poweroff.c ARM: keystone2: Switch to using the poweroff command 2016-03-16 15:03:32 -04:00
config.mk ARM: keystone2: Use dtb images by default 2015-10-22 14:22:11 -04:00
ddr3_spd.c ARM: keystone2: use detected ddr3a size 2016-03-14 19:18:45 -04:00
ddr3.c ARM: K2G: DDR3: Fix up priv ID for MPU 2016-12-03 13:21:10 -05:00
init.c keystone: k2h/e/l: Fix DMA coherency for QM PDSP 2016-07-25 12:00:05 -04:00
Kconfig ARM: k2g: Add kconfig support 2015-10-22 14:22:13 -04:00
keystone.c ARM: keystone2: Switch to using the poweroff command 2016-03-16 15:03:32 -04:00
Makefile keystone2: Move target selection to Kconfig 2016-11-28 15:10:34 -05:00
mon.c ARM: keystone2: Split monitor code / command code 2016-03-16 15:03:15 -04:00
msmc.c ARM: keystone: move SoC sources to mach-keystone 2015-02-21 08:23:52 -05:00
psc.c treewide: replace #include <asm-generic/errno.h> with <linux/errno.h> 2016-09-23 22:25:27 -04:00