mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-11 13:43:27 +08:00
1d667227ea
The DragonBoard 410c has proprietary firmware from Qualcomm that
reserves 8 MiB of memory for tz/smem/hyp/rmtfs/rfsa from 0x86000000
to 0x86800000. I'm not aware of any ATF (ARM Trusted Firmware) port
for DB410c that would reserve 30 MiB of memory at the end of RAM.
I suspect the comment might have been copied from hikey.h which has
a very similar comment (and which actually does have an ATF port).
Reducing the memory size just prevents U-Boot from using the end of
the RAM, not the reserved region inbetween. Therefore we might as well
display the correct DRAM size (1 GiB) instead of strange 986 MiB.
Fixes: 626f048bbc ("board: Add Qualcomm Dragonboard 410C support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
93 lines
2.5 KiB
C
93 lines
2.5 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Board configuration file for Dragonboard 410C
|
|
*
|
|
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
|
|
*/
|
|
|
|
#ifndef __CONFIGS_DRAGONBOARD410C_H
|
|
#define __CONFIGS_DRAGONBOARD410C_H
|
|
|
|
#include <linux/sizes.h>
|
|
#include <asm/arch/sysmap-apq8016.h>
|
|
|
|
/* Build new ELF image from u-boot.bin (U-Boot + appended DTB) */
|
|
#define CONFIG_REMAKE_ELF
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM_1 0x80000000
|
|
/* Note: 8 MiB (0x86000000 - 0x86800000) are reserved for tz/smem/hyp/rmtfs/rfsa */
|
|
#define PHYS_SDRAM_1_SIZE SZ_1G
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
|
|
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
|
|
#define CONFIG_SYS_BOOTM_LEN SZ_64M
|
|
|
|
/* UART */
|
|
|
|
/* Generic Timer Definitions */
|
|
#define COUNTER_FREQUENCY 19000000
|
|
|
|
/* Fixup - in init code we switch from device to host mode,
|
|
* it has to be done after each HCD reset */
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
|
|
|
/* BOOTP options */
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(USB, usb, 0) \
|
|
func(MMC, mmc, 1) \
|
|
func(MMC, mmc, 0) \
|
|
func(DHCP, dhcp, na)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
/* Does what recovery does */
|
|
#define REFLASH(file, part) \
|
|
"part start mmc 0 "#part" start && "\
|
|
"part size mmc 0 "#part" size && "\
|
|
"tftp $loadaddr "#file" && " \
|
|
"mmc write $loadaddr $start $size && "
|
|
|
|
#define CONFIG_ENV_REFLASH \
|
|
"mmc dev 0 && "\
|
|
"usb start && "\
|
|
"dhcp && "\
|
|
"tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\
|
|
"mmc write $loadaddr 0 43 && " \
|
|
"mmc rescan && "\
|
|
REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\
|
|
REFLASH(dragonboard/rescue/sbl1.mbn, 2)\
|
|
REFLASH(dragonboard/rescue/rpm.mbn, 3)\
|
|
REFLASH(dragonboard/rescue/tz.mbn, 4)\
|
|
REFLASH(dragonboard/rescue/hyp.mbn, 5)\
|
|
REFLASH(dragonboard/rescue/sec.dat, 6)\
|
|
REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\
|
|
REFLASH(dragonboard/u-boot.img, 8)\
|
|
"usb stop &&"\
|
|
"echo Reflash completed"
|
|
|
|
/* Environment */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"reflash="CONFIG_ENV_REFLASH"\0"\
|
|
"loadaddr=0x81000000\0" \
|
|
"initrd_high=0xffffffffffffffff\0" \
|
|
"linux_image=Image\0" \
|
|
"kernel_addr_r=0x81000000\0"\
|
|
"fdtfile=qcom/apq8016-sbc.dtb\0" \
|
|
"fdt_addr_r=0x83000000\0"\
|
|
"ramdisk_addr_r=0x84000000\0"\
|
|
"scriptaddr=0x90000000\0"\
|
|
"pxefile_addr_r=0x90100000\0"\
|
|
BOOTENV
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
|
|
|
|
/* Monitor Command Prompt */
|
|
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 64 /* max command args */
|
|
|
|
#endif
|