u-boot/include/configs/blanche.h
Tom Rini ecad7051b0 configs: Migrate all of the existing USB symbols, except fastboot
This syncs all of the currently Kconfig'd symbols out of the headers and
into the defconfig files.  This has two exceptions, first am335x_evm
needs to be converted to DM in SPL and then it can stop undef'ing
CONFIG_DM_USB.  Leaving this as-is results in a build failure, and
without work, run time failure.  The other case is am43xx_evm.h and in
turn am43xx_evm_usbhost_boot.  The problem here is that we need DWC3 USB
host mode in SPL, but still desire to have gadget mode in U-Boot proper.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-01 16:18:20 -04:00

110 lines
3.0 KiB
C
Executable File

/*
* include/configs/blanche.h
* This file is blanche board configuration.
*
* Copyright (C) 2016 Renesas Electronics Corporation
*
* SPDX-License-Identifier: GPL-2.0
*/
#ifndef __BLANCHE_H
#define __BLANCHE_H
#undef DEBUG
#define CONFIG_R8A7792
#define CONFIG_RMOBILE_BOARD_STRING "Blanche"
#include "rcar-gen2-common.h"
/* STACK */
#define CONFIG_SYS_INIT_SP_ADDR 0xE817FFFC
#define STACK_AREA_SIZE 0xC000
#define LOW_LEVEL_MERAM_STACK \
(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
/* MEMORY */
#define RCAR_GEN2_SDRAM_BASE 0x40000000
#define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024)
#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
/* SCIF */
#define CONFIG_CONS_SCIF0
#define CONFIG_SYS_MEMTEST_START (RCAR_GEN2_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 504 * 1024 * 1024)
#undef CONFIG_SYS_ALT_MEMTEST
#undef CONFIG_SYS_MEMTEST_SCRATCH
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
/* FLASH */
#if !defined(CONFIG_MTD_NOR_FLASH)
#define CONFIG_SYS_TEXT_BASE 0x40000000
#define CONFIG_SPI
#define CONFIG_SH_QSPI
#define CONFIG_SH_QSPI_BASE 0xE6B10000
#else
#define CONFIG_SYS_TEXT_BASE 0x00000000
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
#define CONFIG_FLASH_SHOW_PROGRESS 45
#define CONFIG_SYS_FLASH_BASE 0x00000000
#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MB */
#define CONFIG_SYS_MAX_FLASH_SECT 1024
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }
#define CONFIG_SYS_FLASH_BANKS_SIZES { (CONFIG_SYS_FLASH_SIZE) }
#define CONFIG_SYS_FLASH_ERASE_TOUT 3000
#define CONFIG_SYS_FLASH_WRITE_TOUT 3000
#define CONFIG_SYS_FLASH_LOCK_TOUT 3000
#define CONFIG_SYS_FLASH_UNLOCK_TOUT 3000
#undef CONFIG_CMD_SF
#undef CONFIG_CMD_SPI
#endif
/* BLANCHE on board LANC: SMC89218 (ExCS0) */
#define CONFIG_NET_MULTI
#define CONFIG_SMC911X 1
#define CONFIG_SMC911X_16_BIT 1
#define CONFIG_SMC911X_BASE 0x18000000
/* Board Clock */
#define RMOBILE_XTAL_CLK 20000000u
#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK
#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
#define CONFIG_SYS_TMU_CLK_DIV 4
/* ENV setting */
#if !defined(CONFIG_MTD_NOR_FLASH)
#else
#undef CONFIG_ENV_ADDR
#define CONFIG_ENV_SECT_SIZE (256 * 1024)
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_SYS_MONITOR_LEN)
#endif
/* Module stop status bits */
/* INTC-RT */
#define CONFIG_SMSTP0_ENA 0x00400000
/* SDHI0 */
#define CONFIG_SMSTP3_ENA 0x00004000
/* INTC-SYS, IRQC */
#define CONFIG_SMSTP4_ENA 0x00000180
/* SCIF0 */
#define CONFIG_SMSTP7_ENA 0x00200000
/* QSPI */
#define CONFIG_SMSTP9_ENA 0x00020000
/* SYS-DMAC0 */
#define CONFIG_RMSTP2_ENA 0x00080000
/* SDHI */
#define CONFIG_SH_SDHI_FREQ 97500000
#define HAVE_BLOCK_DEVICE
#endif /* __BLANCHE_H */