mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-15 15:53:26 +08:00
185f812c41
Sphinx expects Return: and not @return to indicate a return value.
find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;
find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
415 lines
11 KiB
C
415 lines
11 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Adapted from Linux kernel driver
|
|
* Copyright (C) 2017 Texas Instruments
|
|
* Author: Kishon Vijay Abraham I <kishon@ti.com>
|
|
*
|
|
* (C) Copyright 2019
|
|
* Ramon Fried <ramon.fried@gmail.com>
|
|
*/
|
|
|
|
#ifndef _PCI_EP_H
|
|
#define _PCI_EP_H
|
|
|
|
#include <pci.h>
|
|
|
|
/**
|
|
* enum pci_interrupt_pin - PCI INTx interrupt values
|
|
* @PCI_INTERRUPT_UNKNOWN: Unknown or unassigned interrupt
|
|
* @PCI_INTERRUPT_INTA: PCI INTA pin
|
|
* @PCI_INTERRUPT_INTB: PCI INTB pin
|
|
* @PCI_INTERRUPT_INTC: PCI INTC pin
|
|
* @PCI_INTERRUPT_INTD: PCI INTD pin
|
|
*
|
|
* Corresponds to values for legacy PCI INTx interrupts, as can be found in the
|
|
* PCI_INTERRUPT_PIN register.
|
|
*/
|
|
enum pci_interrupt_pin {
|
|
PCI_INTERRUPT_UNKNOWN,
|
|
PCI_INTERRUPT_INTA,
|
|
PCI_INTERRUPT_INTB,
|
|
PCI_INTERRUPT_INTC,
|
|
PCI_INTERRUPT_INTD,
|
|
};
|
|
|
|
enum pci_barno {
|
|
BAR_0,
|
|
BAR_1,
|
|
BAR_2,
|
|
BAR_3,
|
|
BAR_4,
|
|
BAR_5,
|
|
};
|
|
|
|
enum pci_ep_irq_type {
|
|
PCI_EP_IRQ_UNKNOWN,
|
|
PCI_EP_IRQ_LEGACY,
|
|
PCI_EP_IRQ_MSI,
|
|
PCI_EP_IRQ_MSIX,
|
|
};
|
|
|
|
/**
|
|
* struct pci_bar - represents the BAR (Base Address Register) of EP device
|
|
* @phys_addr: physical address that should be mapped to the BAR
|
|
* @size: the size of the address space present in BAR
|
|
* pci_barno: number of pci BAR to set (0..5)
|
|
* @flags: BAR access flags
|
|
*/
|
|
struct pci_bar {
|
|
dma_addr_t phys_addr;
|
|
size_t size;
|
|
enum pci_barno barno;
|
|
int flags;
|
|
};
|
|
|
|
/**
|
|
* struct pci_ep_header - represents standard configuration header
|
|
* @vendorid: identifies device manufacturer
|
|
* @deviceid: identifies a particular device
|
|
* @revid: specifies a device-specific revision identifier
|
|
* @progif_code: identifies a specific register-level programming interface
|
|
* @subclass_code: identifies more specifically the function of the device
|
|
* @baseclass_code: broadly classifies the type of function the device performs
|
|
* @cache_line_size: specifies the system cacheline size in units of DWORDs
|
|
* @subsys_vendor_id: vendor of the add-in card or subsystem
|
|
* @subsys_id: id specific to vendor
|
|
* @interrupt_pin: interrupt pin the device (or device function) uses
|
|
*/
|
|
struct pci_ep_header {
|
|
u16 vendorid;
|
|
u16 deviceid;
|
|
u8 revid;
|
|
u8 progif_code;
|
|
u8 subclass_code;
|
|
u8 baseclass_code;
|
|
u8 cache_line_size;
|
|
u16 subsys_vendor_id;
|
|
u16 subsys_id;
|
|
enum pci_interrupt_pin interrupt_pin;
|
|
};
|
|
|
|
/* PCI endpoint operations */
|
|
struct pci_ep_ops {
|
|
/**
|
|
* write_header() - Write a PCI configuration space header
|
|
*
|
|
* @dev: device to write to
|
|
* @func_num: EP function to fill
|
|
* @hdr: header to write
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*write_header)(struct udevice *dev, uint func_num,
|
|
struct pci_ep_header *hdr);
|
|
/**
|
|
* read_header() - Read a PCI configuration space header
|
|
*
|
|
* @dev: device to write to
|
|
* @func_num: EP function to fill
|
|
* @hdr: header to read to
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*read_header)(struct udevice *dev, uint func_num,
|
|
struct pci_ep_header *hdr);
|
|
/**
|
|
* set_bar() - Set BAR (Base Address Register) properties
|
|
*
|
|
* @dev: device to set
|
|
* @func_num: EP function to set
|
|
* @bar: bar data
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*set_bar)(struct udevice *dev, uint func_num,
|
|
struct pci_bar *bar);
|
|
/**
|
|
* read_bar() - Read BAR (Base Address Register) properties
|
|
*
|
|
* @dev: device to read
|
|
* @func_num: EP function to read
|
|
* @bar: struct to copy data to
|
|
* @barno: bar number to read
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*read_bar)(struct udevice *dev, uint func_num,
|
|
struct pci_bar *bar, enum pci_barno barno);
|
|
/**
|
|
* clear_bar() - clear BAR (Base Address Register)
|
|
*
|
|
* @dev: device to clear
|
|
* @func_num: EP function to clear
|
|
* @bar: bar number
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*clear_bar)(struct udevice *dev, uint func_num,
|
|
enum pci_barno bar);
|
|
/**
|
|
* map_addr() - map CPU address to PCI address
|
|
*
|
|
* outband region is used in order to generate PCI read/write
|
|
* transaction from local memory/write.
|
|
*
|
|
* @dev: device to set
|
|
* @func_num: EP function to set
|
|
* @addr: local physical address base
|
|
* @pci_addr: pci address to translate to
|
|
* @size: region size
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*map_addr)(struct udevice *dev, uint func_num,
|
|
phys_addr_t addr, u64 pci_addr, size_t size);
|
|
/**
|
|
* unmap_addr() - unmap CPU address to PCI address
|
|
*
|
|
* unmap previously mapped region.
|
|
*
|
|
* @dev: device to set
|
|
* @func_num: EP function to set
|
|
* @addr: local physical address base
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*unmap_addr)(struct udevice *dev, uint func_num,
|
|
phys_addr_t addr);
|
|
/**
|
|
* set_msi() - set msi capability property
|
|
*
|
|
* set the number of required MSI vectors the device
|
|
* needs for operation.
|
|
*
|
|
* @dev: device to set
|
|
* @func_num: EP function to set
|
|
* @interrupts: required interrupts count
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*set_msi)(struct udevice *dev, uint func_num, uint interrupts);
|
|
|
|
/**
|
|
* get_msi() - get the number of MSI interrupts allocated by the host.
|
|
*
|
|
* Read the Multiple Message Enable bitfield from
|
|
* Message control register.
|
|
*
|
|
* @dev: device to use
|
|
* @func_num: EP function to use
|
|
* @return msi count if OK, -EINVAL if msi were not enabled at host.
|
|
*/
|
|
int (*get_msi)(struct udevice *dev, uint func_num);
|
|
|
|
/**
|
|
* set_msix() - set msix capability property
|
|
*
|
|
* set the number of required MSIx vectors the device
|
|
* needs for operation.
|
|
*
|
|
* @dev: device to set
|
|
* @func_num: EP function to set
|
|
* @interrupts: required interrupts count
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*set_msix)(struct udevice *dev, uint func_num,
|
|
uint interrupts);
|
|
|
|
/**
|
|
* get_msix() - get the number of MSIx interrupts allocated by the host.
|
|
*
|
|
* Read the Multiple Message Enable bitfield from
|
|
* Message control register.
|
|
*
|
|
* @dev: device to use
|
|
* @func_num: EP function to use
|
|
* @return msi count if OK, -EINVAL if msi were not enabled at host.
|
|
*/
|
|
int (*get_msix)(struct udevice *dev, uint func_num);
|
|
|
|
/**
|
|
* raise_irq() - raise a legacy, MSI or MSI-X interrupt
|
|
*
|
|
* @dev: device to set
|
|
* @func_num: EP function to set
|
|
* @type: type of irq to send
|
|
* @interrupt_num: interrupt vector to use
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*raise_irq)(struct udevice *dev, uint func_num,
|
|
enum pci_ep_irq_type type, uint interrupt_num);
|
|
/**
|
|
* start() - start the PCI link
|
|
*
|
|
* @dev: device to set
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*start)(struct udevice *dev);
|
|
|
|
/**
|
|
* stop() - stop the PCI link
|
|
*
|
|
* @dev: device to set
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*stop)(struct udevice *dev);
|
|
};
|
|
|
|
#define pci_ep_get_ops(dev) ((struct pci_ep_ops *)(dev)->driver->ops)
|
|
|
|
/**
|
|
* pci_ep_write_header() - Write a PCI configuration space header
|
|
*
|
|
* @dev: device to write to
|
|
* @func_num: EP function to fill
|
|
* @hdr: header to write
|
|
* Return: 0 if OK, -ve on error
|
|
*/
|
|
int pci_ep_write_header(struct udevice *dev, uint func_num,
|
|
struct pci_ep_header *hdr);
|
|
|
|
/**
|
|
* dm_pci_ep_read_header() - Read a PCI configuration space header
|
|
*
|
|
* @dev: device to write to
|
|
* @func_num: EP function to fill
|
|
* @hdr: header to read to
|
|
* Return: 0 if OK, -ve on error
|
|
*/
|
|
int pci_ep_read_header(struct udevice *dev, uint func_num,
|
|
struct pci_ep_header *hdr);
|
|
/**
|
|
* pci_ep_set_bar() - Set BAR (Base Address Register) properties
|
|
*
|
|
* @dev: device to set
|
|
* @func_num: EP function to set
|
|
* @bar: bar data
|
|
* Return: 0 if OK, -ve on error
|
|
*/
|
|
int pci_ep_set_bar(struct udevice *dev, uint func_num, struct pci_bar *bar);
|
|
|
|
/**
|
|
* pci_ep_read_bar() - Read BAR (Base Address Register) properties
|
|
*
|
|
* @dev: device to read
|
|
* @func_num: EP function to read
|
|
* @bar: struct to copy data to
|
|
* @barno: bar number to read
|
|
* Return: 0 if OK, -ve on error
|
|
*/
|
|
int pci_ep_read_bar(struct udevice *dev, uint func_no, struct pci_bar *ep_bar,
|
|
enum pci_barno barno);
|
|
|
|
/**
|
|
* pci_ep_clear_bar() - Clear BAR (Base Address Register)
|
|
* mark the BAR as empty so host won't map it.
|
|
* @dev: device to clear
|
|
* @func_num: EP function to clear
|
|
* @bar: bar number
|
|
* Return: 0 if OK, -ve on error
|
|
*/
|
|
int pci_ep_clear_bar(struct udevice *dev, uint func_num, enum pci_barno bar);
|
|
/**
|
|
* pci_ep_map_addr() - map CPU address to PCI address
|
|
*
|
|
* outband region is used in order to generate PCI read/write
|
|
* transaction from local memory/write.
|
|
*
|
|
* @dev: device to set
|
|
* @func_num: EP function to set
|
|
* @addr: local physical address base
|
|
* @pci_addr: pci address to translate to
|
|
* @size: region size
|
|
* Return: 0 if OK, -ve on error
|
|
*/
|
|
int pci_ep_map_addr(struct udevice *dev, uint func_num, phys_addr_t addr,
|
|
u64 pci_addr, size_t size);
|
|
/**
|
|
* pci_ep_unmap_addr() - unmap CPU address to PCI address
|
|
*
|
|
* unmap previously mapped region.
|
|
*
|
|
* @dev: device to set
|
|
* @func_num: EP function to set
|
|
* @addr: local physical address base
|
|
* Return: 0 if OK, -ve on error
|
|
*/
|
|
int pci_ep_unmap_addr(struct udevice *dev, uint func_num, phys_addr_t addr);
|
|
|
|
/**
|
|
* pci_ep_set_msi() - set msi capability property
|
|
*
|
|
* set the number of required MSI vectors the device
|
|
* needs for operation.
|
|
*
|
|
* @dev: device to set
|
|
* @func_num: EP function to set
|
|
* @interrupts: required interrupts count
|
|
* Return: 0 if OK, -ve on error
|
|
*/
|
|
int pci_ep_set_msi(struct udevice *dev, uint func_num, uint interrupts);
|
|
|
|
/**
|
|
* pci_ep_get_msi() - get the number of MSI interrupts allocated by the host.
|
|
*
|
|
* Read the Multiple Message Enable bitfield from
|
|
* Message control register.
|
|
*
|
|
* @dev: device to use
|
|
* @func_num: EP function to use
|
|
* Return: msi count if OK, -EINVAL if msi were not enabled at host.
|
|
*/
|
|
int pci_ep_get_msi(struct udevice *dev, uint func_num);
|
|
|
|
/**
|
|
* pci_ep_set_msix() - set msi capability property
|
|
*
|
|
* set the number of required MSIx vectors the device
|
|
* needs for operation.
|
|
*
|
|
* @dev: device to set
|
|
* @func_num: EP function to set
|
|
* @interrupts: required interrupts count
|
|
* Return: 0 if OK, -ve on error
|
|
*/
|
|
int pci_ep_set_msix(struct udevice *dev, uint func_num, uint interrupts);
|
|
|
|
/**
|
|
* pci_ep_get_msix() - get the number of MSIx interrupts allocated by the host.
|
|
*
|
|
* Read the Multiple Message Enable bitfield from
|
|
* Message control register.
|
|
*
|
|
* @dev: device to use
|
|
* @func_num: EP function to use
|
|
* Return: msi count if OK, -EINVAL if msi were not enabled at host.
|
|
*/
|
|
int pci_ep_get_msix(struct udevice *dev, uint func_num);
|
|
|
|
/**
|
|
* pci_ep_raise_irq() - raise a legacy, MSI or MSI-X interrupt
|
|
*
|
|
* @dev: device to set
|
|
* @func_num: EP function to set
|
|
* @type: type of irq to send
|
|
* @interrupt_num: interrupt vector to use
|
|
* Return: 0 if OK, -ve on error
|
|
*/
|
|
int pci_ep_raise_irq(struct udevice *dev, uint func_num,
|
|
enum pci_ep_irq_type type, uint interrupt_num);
|
|
/**
|
|
* pci_ep_start() - start the PCI link
|
|
*
|
|
* Enable PCI endpoint device and start link
|
|
* process.
|
|
*
|
|
* @dev: device to set
|
|
* Return: 0 if OK, -ve on error
|
|
*/
|
|
int pci_ep_start(struct udevice *dev);
|
|
|
|
/**
|
|
* pci_ep_stop() - stop the PCI link
|
|
*
|
|
* Disable PCI endpoint device and stop
|
|
* link.
|
|
*
|
|
* @dev: device to set
|
|
* Return: 0 if OK, -ve on error
|
|
*/
|
|
int pci_ep_stop(struct udevice *dev);
|
|
|
|
#endif
|