wdenk a2d18bb7d3 * Make sure to use a bus clock divider of 2 only when running TQM8xxM ... modules at CPU clock frequencies above 66 MHz. * Optimize flash programming speed for LWMON (by another 100% :-)		2004-02-11 21:35:18 +00:00
..
bedbug_860.c	* Code cleanup:	2003-06-27 21:31:46 +00:00
commproc.c	* Map ISP1362 USB OTG controller for NSCU board	2003-08-05 17:43:17 +00:00
config.mk	* Use "-fPIC" instead of "-mrelocatable" to prevent problems with	2003-11-17 21:14:37 +00:00
cpu_init.c	* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):	2004-01-24 20:25:54 +00:00
cpu.c	Fix variable CPU clock for MPC859/866 systems for low CPU clocks	2004-01-31 20:06:54 +00:00
fec.c	* Fix problems caused by Robert Schwebel's cramfs patch	2004-01-04 16:28:35 +00:00
fec.h	Initial revision	2000-12-14 10:04:19 +00:00
i2c.c	* Code cleanup:	2003-06-27 21:31:46 +00:00
interrupts.c	* Fix problems caused by Robert Schwebel's cramfs patch	2004-01-04 16:28:35 +00:00
kgdb.S	Initial revision	2002-07-20 20:14:13 +00:00
lcd.c	Add support for BMS2003 board	2003-11-25 16:55:19 +00:00
Makefile	* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):	2004-01-24 20:25:54 +00:00
plprcr_write.S	* Patch by Wolter Kamphuis, 15 Dec 2003:	2004-02-06 21:48:22 +00:00
scc.c	Patch by Wolter Kamphuis, 05 Dec 2003:	2003-12-07 22:27:15 +00:00
serial.c	Fix variable CPU clock for MPC859/866 systems for low CPU clocks	2004-01-31 20:06:54 +00:00
speed.c	* Make sure to use a bus clock divider of 2 only when running TQM8xxM	2004-02-11 21:35:18 +00:00
spi.c	* The PS/2 mux on the BMS2003 board needs 450 ms after power on	2004-01-20 23:12:12 +00:00
start.S	* Fix ICU862 environment problem	2003-08-28 09:41:22 +00:00
traps.c	Initial revision	2002-08-17 09:36:01 +00:00
upatch.c	* Code cleanup:	2003-06-27 21:31:46 +00:00
video.c	* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)	2003-07-16 21:53:01 +00:00
wlkbd.c	Initial revision	2002-08-27 09:48:53 +00:00