mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-01 00:23:29 +08:00
700a0c648d
Old, obsolete and duplicated code was cleaned up and replace by the new partitioning method. There are two possible approaches now: * define a single, static partition * use mtdparts command line option and dynamic partitioning Default is static partitioning.
288 lines
9.3 KiB
C
288 lines
9.3 KiB
C
/*
|
|
* (C) Copyright 2004
|
|
* Texas Instruments.
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Kshitij Gupta <kshitij@ti.com>
|
|
*
|
|
* Configuration settings for the 242x TI H4 board.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
*/
|
|
#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
|
|
#define CONFIG_OMAP 1 /* in a TI OMAP core */
|
|
#define CONFIG_OMAP2420 1 /* which is in a 2420 */
|
|
#define CONFIG_OMAP2420H4 1 /* and on a H4 board */
|
|
/*#define CONFIG_APTIX 1 #* define if on APTIX test chip */
|
|
/*#define CONFIG_VIRTIO 1 #* Using Virtio simulator */
|
|
|
|
/* Clock config to target*/
|
|
#define PRCM_CONFIG_II 1
|
|
/*#define PRCM_CONFIG_III 1 */
|
|
|
|
/* Memory configuration on board */
|
|
/*#define CONFIG_OPTIMIZE_DDR 1 */
|
|
|
|
#include <asm/arch/omap2420.h> /* get chip and board defs */
|
|
|
|
/* On H4, NOR and NAND flash are mutual exclusive.
|
|
Define this if you want to use NAND
|
|
*/
|
|
/*#define CFG_NAND_BOOT */
|
|
|
|
#ifdef CONFIG_APTIX
|
|
#define V_SCLK 1500000
|
|
#else
|
|
#define V_SCLK 12000000
|
|
#endif
|
|
|
|
/* input clock of PLL */
|
|
/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */
|
|
#define CONFIG_SYS_CLK_FREQ V_SCLK
|
|
|
|
#undef CONFIG_USE_IRQ /* no support for IRQs */
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
#define CONFIG_REVISION_TAG 1
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CFG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */
|
|
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + SZ_128K)
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
|
|
/*
|
|
* SMC91c96 Etherent
|
|
*/
|
|
#define CONFIG_DRIVER_LAN91C96
|
|
#define CONFIG_LAN91C96_BASE (H4_CS1_BASE+0x300)
|
|
#define CONFIG_LAN91C96_EXT_PHY
|
|
|
|
/*
|
|
* NS16550 Configuration
|
|
*/
|
|
#ifdef CONFIG_APTIX
|
|
#define V_NS16550_CLK (6000000) /* 6MHz in current MaxSet */
|
|
#else
|
|
#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */
|
|
#endif
|
|
|
|
#define CFG_NS16550
|
|
#define CFG_NS16550_SERIAL
|
|
#define CFG_NS16550_REG_SIZE (-4)
|
|
#define CFG_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */
|
|
#define CFG_NS16550_COM1 OMAP2420_UART1
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*/
|
|
#define CONFIG_SERIAL1 1 /* UART1 on H4 */
|
|
|
|
/*
|
|
* I2C configuration
|
|
*/
|
|
#define CONFIG_HARD_I2C
|
|
#define CFG_I2C_SPEED 100000
|
|
#define CFG_I2C_SLAVE 1
|
|
#define CONFIG_DRIVER_OMAP24XX_I2C
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
|
|
|
|
#ifdef CFG_NAND_BOOT
|
|
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_NAND | CFG_CMD_JFFS2)
|
|
#else
|
|
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_JFFS2)
|
|
#endif
|
|
/* I'd like to get to these. Snap kernel loads if we make MMC go */
|
|
/* #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_NAND | CFG_CMD_JFFS2 | CFG_CMD_DHCP | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_I2C) */
|
|
|
|
#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
|
|
|
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
|
#include <cmd_confdefs.h>
|
|
|
|
/*
|
|
* Board NAND Info.
|
|
*/
|
|
#define CFG_NAND_ADDR 0x04000000 /* physical address to access nand at CS0*/
|
|
|
|
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
|
#define SECTORSIZE 512
|
|
|
|
#define ADDR_COLUMN 1
|
|
#define ADDR_PAGE 2
|
|
#define ADDR_COLUMN_PAGE 3
|
|
|
|
#define NAND_ChipID_UNKNOWN 0x00
|
|
#define NAND_MAX_FLOORS 1
|
|
#define NAND_MAX_CHIPS 1
|
|
|
|
#define WRITE_NAND_COMMAND(d, adr) do {*(volatile u16 *)0x6800A07C = d;} while(0)
|
|
#define WRITE_NAND_ADDRESS(d, adr) do {*(volatile u16 *)0x6800A080 = d;} while(0)
|
|
#define WRITE_NAND(d, adr) do {*(volatile u16 *)0x6800A084 = d;} while(0)
|
|
#define READ_NAND(adr) (*(volatile u16 *)0x6800A084)
|
|
#define NAND_WAIT_READY(nand) udelay(10)
|
|
|
|
#define NAND_NO_RB 1
|
|
|
|
#define CFG_NAND_WP
|
|
#define NAND_WP_OFF() do {*(volatile u32 *)(0x6800A050) |= 0x00000010;} while(0)
|
|
#define NAND_WP_ON() do {*(volatile u32 *)(0x6800A050) &= ~0x00000010;} while(0)
|
|
|
|
|
|
#define NAND_CTL_CLRALE(nandptr)
|
|
#define NAND_CTL_SETALE(nandptr)
|
|
#define NAND_CTL_CLRCLE(nandptr)
|
|
#define NAND_CTL_SETCLE(nandptr)
|
|
#define NAND_DISABLE_CE(nand)
|
|
#define NAND_ENABLE_CE(nand)
|
|
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
|
|
#ifdef NFS_BOOT_DEFAULTS
|
|
#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=128.247.77.158:/home/a0384864/wtbu/rootfs ip=dhcp"
|
|
#else
|
|
#define CONFIG_BOOTARGS "root=/dev/ram0 rw mem=32M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
|
|
#endif
|
|
|
|
#define CONFIG_NETMASK 255.255.254.0
|
|
#define CONFIG_IPADDR 128.247.77.90
|
|
#define CONFIG_SERVERIP 128.247.77.158
|
|
#define CONFIG_BOOTFILE "uImage"
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#ifdef CONFIG_APTIX
|
|
#define V_PROMPT "OMAP2420 Aptix # "
|
|
#else
|
|
#define V_PROMPT "OMAP242x H4 # "
|
|
#endif
|
|
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT V_PROMPT
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
/* Print Buffer Size */
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */
|
|
#define CFG_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M)
|
|
|
|
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
|
|
|
#define CFG_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */
|
|
|
|
/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
|
|
* 32KHz clk, or from external sig. This rate is divided by a local divisor.
|
|
*/
|
|
#ifdef CONFIG_APTIX
|
|
#define V_PVT 3
|
|
#else
|
|
#define V_PVT 7 /* use with 12MHz/128 */
|
|
#endif
|
|
|
|
#define CFG_TIMERBASE OMAP2420_GPT2
|
|
#define CFG_PVT V_PVT /* 2^(pvt+1) */
|
|
#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE SZ_128K /* regular stack */
|
|
#ifdef CONFIG_USE_IRQ
|
|
#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */
|
|
#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
|
|
#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0
|
|
#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */
|
|
#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1
|
|
|
|
#define PHYS_FLASH_1 H4_CS0_BASE /* Flash Bank #1 */
|
|
#define PHYS_FLASH_SIZE_1 SZ_32M
|
|
#define PHYS_FLASH_2 (H4_CS0_BASE+SZ_32M) /* same cs, 2 chips in series */
|
|
#define PHYS_FLASH_SIZE_2 SZ_32M
|
|
#define CFG_FLASH_BASE PHYS_FLASH_1
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH and environment organization
|
|
*/
|
|
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
|
|
#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */
|
|
|
|
#ifdef CFG_NAND_BOOT
|
|
#define CFG_ENV_IS_IN_NAND 1
|
|
#define CFG_ENV_OFFSET 0x80000 /* environment starts here */
|
|
#else
|
|
#define CFG_ENV_ADDR (CFG_FLASH_BASE + SZ_128K)
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
#endif
|
|
|
|
/* timeout values are in ticks */
|
|
#define CFG_FLASH_ERASE_TOUT (30*75*CFG_HZ) /* Timeout for Flash Erase */
|
|
#define CFG_FLASH_WRITE_TOUT (30*75*CFG_HZ) /* Timeout for Flash Write */
|
|
|
|
#define CFG_JFFS2_MEM_NAND
|
|
|
|
/*
|
|
* JFFS2 partitions
|
|
*/
|
|
/* No command line, one static partition, whole device */
|
|
#undef CONFIG_JFFS2_CMDLINE
|
|
#define CONFIG_JFFS2_DEV "nor1"
|
|
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
|
|
#define CONFIG_JFFS2_PART_OFFSET 0x00000000
|
|
|
|
/* mtdparts command line support */
|
|
/* Note: fake mtd_id used, no linux mtd map file */
|
|
/*
|
|
#define CONFIG_JFFS2_CMDLINE
|
|
#define MTDIDS_DEFAULT "nor1=omap2420-1"
|
|
#define MTDPARTS_DEFAULT "mtdparts=omap2420-1:-(jffs2)"
|
|
*/
|
|
|
|
#endif /* __CONFIG_H */
|