mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-13 06:43:29 +08:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
112 lines
2.5 KiB
C
112 lines
2.5 KiB
C
/*
|
|
* Copyright (C) 2004-2006 Atmel Corporation
|
|
*
|
|
* Modified to support C structur SoC access by
|
|
* Andreas Bießmann <biessmann@corscience.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <watchdog.h>
|
|
#include <serial.h>
|
|
#include <linux/compiler.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/hardware.h>
|
|
|
|
#include "atmel_usart.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static void atmel_serial_setbrg(void)
|
|
{
|
|
atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
|
|
unsigned long divisor;
|
|
unsigned long usart_hz;
|
|
|
|
/*
|
|
* Master Clock
|
|
* Baud Rate = --------------
|
|
* 16 * CD
|
|
*/
|
|
usart_hz = get_usart_clk_rate(CONFIG_USART_ID);
|
|
divisor = (usart_hz / 16 + gd->baudrate / 2) / gd->baudrate;
|
|
writel(USART3_BF(CD, divisor), &usart->brgr);
|
|
}
|
|
|
|
static int atmel_serial_init(void)
|
|
{
|
|
atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
|
|
|
|
/*
|
|
* Just in case: drain transmitter register
|
|
* 1000us is enough for baudrate >= 9600
|
|
*/
|
|
if (!(readl(&usart->csr) & USART3_BIT(TXEMPTY)))
|
|
__udelay(1000);
|
|
|
|
writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr);
|
|
|
|
serial_setbrg();
|
|
|
|
writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
|
|
| USART3_BF(USCLKS, USART3_USCLKS_MCK)
|
|
| USART3_BF(CHRL, USART3_CHRL_8)
|
|
| USART3_BF(PAR, USART3_PAR_NONE)
|
|
| USART3_BF(NBSTOP, USART3_NBSTOP_1)),
|
|
&usart->mr);
|
|
writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr);
|
|
/* 100us is enough for the new settings to be settled */
|
|
__udelay(100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void atmel_serial_putc(char c)
|
|
{
|
|
atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
|
|
|
|
if (c == '\n')
|
|
serial_putc('\r');
|
|
|
|
while (!(readl(&usart->csr) & USART3_BIT(TXRDY)));
|
|
writel(c, &usart->thr);
|
|
}
|
|
|
|
static int atmel_serial_getc(void)
|
|
{
|
|
atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
|
|
|
|
while (!(readl(&usart->csr) & USART3_BIT(RXRDY)))
|
|
WATCHDOG_RESET();
|
|
return readl(&usart->rhr);
|
|
}
|
|
|
|
static int atmel_serial_tstc(void)
|
|
{
|
|
atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
|
|
return (readl(&usart->csr) & USART3_BIT(RXRDY)) != 0;
|
|
}
|
|
|
|
static struct serial_device atmel_serial_drv = {
|
|
.name = "atmel_serial",
|
|
.start = atmel_serial_init,
|
|
.stop = NULL,
|
|
.setbrg = atmel_serial_setbrg,
|
|
.putc = atmel_serial_putc,
|
|
.puts = default_serial_puts,
|
|
.getc = atmel_serial_getc,
|
|
.tstc = atmel_serial_tstc,
|
|
};
|
|
|
|
void atmel_serial_initialize(void)
|
|
{
|
|
serial_register(&atmel_serial_drv);
|
|
}
|
|
|
|
__weak struct serial_device *default_serial_console(void)
|
|
{
|
|
return &atmel_serial_drv;
|
|
}
|