mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-05 10:33:42 +08:00
1f36f73fe7
Use the MMU hardware to set up 1:1 mappings between physical and virtual addresses. This allows us to bypass the cache when accessing the flash without having to do any physical-to-virtual address mapping in the CFI driver. The virtual memory mappings are defined at compile time through a sorted array of virtual memory range objects. When a TLB miss exception happens, the exception handler does a binary search through the array until it finds a matching entry and loads it into the TLB. The u-boot image itself is covered by a fixed TLB entry which is never replaced. This makes the 'saveenv' command work again on ATNGW100 and other boards using the CFI driver, hopefully without breaking any rules. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
230 lines
5.9 KiB
C
230 lines
5.9 KiB
C
/*
|
|
* Copyright (C) 2006 Atmel Corporation
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/sdram.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/hmatrix.h>
|
|
#include <asm/arch/mmu.h>
|
|
#include <asm/arch/portmux.h>
|
|
#include <atmel_lcdc.h>
|
|
#include <lcd.h>
|
|
|
|
#include "../../../arch/avr32/cpu/hsmc3.h"
|
|
|
|
struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
|
|
{
|
|
.virt_pgno = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
|
|
.nr_pages = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
|
|
.phys = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
|
|
| MMU_VMR_CACHE_NONE,
|
|
}, {
|
|
.virt_pgno = EBI_SRAM_CS2_BASE >> PAGE_SHIFT,
|
|
.nr_pages = EBI_SRAM_CS2_SIZE >> PAGE_SHIFT,
|
|
.phys = (EBI_SRAM_CS2_BASE >> PAGE_SHIFT)
|
|
| MMU_VMR_CACHE_NONE,
|
|
}, {
|
|
.virt_pgno = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
|
|
.nr_pages = EBI_SDRAM_SIZE >> PAGE_SHIFT,
|
|
.phys = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
|
|
| MMU_VMR_CACHE_WRBACK,
|
|
},
|
|
};
|
|
|
|
#if defined(CONFIG_LCD)
|
|
/* 480x272x16 @ 72 Hz */
|
|
vidinfo_t panel_info = {
|
|
.vl_col = 480, /* Number of columns */
|
|
.vl_row = 272, /* Number of rows */
|
|
.vl_clk = 5000000, /* pixel clock in ps */
|
|
.vl_sync = ATMEL_LCDC_INVCLK_INVERTED |
|
|
ATMEL_LCDC_INVLINE_INVERTED |
|
|
ATMEL_LCDC_INVFRAME_INVERTED,
|
|
.vl_bpix = LCD_COLOR16, /* Bits per pixel, BPP = 2^n */
|
|
.vl_tft = 1, /* 0 = passive, 1 = TFT */
|
|
.vl_hsync_len = 42, /* Length of horizontal sync */
|
|
.vl_left_margin = 1, /* Time from sync to picture */
|
|
.vl_right_margin = 1, /* Time from picture to sync */
|
|
.vl_vsync_len = 1, /* Length of vertical sync */
|
|
.vl_upper_margin = 12, /* Time from sync to picture */
|
|
.vl_lower_margin = 1, /* Time from picture to sync */
|
|
.mmio = LCDC_BASE, /* Memory mapped registers */
|
|
};
|
|
|
|
void lcd_enable(void)
|
|
{
|
|
}
|
|
|
|
void lcd_disable(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static const struct sdram_config sdram_config = {
|
|
.data_bits = SDRAM_DATA_16BIT,
|
|
.row_bits = 13,
|
|
.col_bits = 9,
|
|
.bank_bits = 2,
|
|
.cas = 3,
|
|
.twr = 2,
|
|
.trc = 6,
|
|
.trp = 2,
|
|
.trcd = 2,
|
|
.tras = 6,
|
|
.txsr = 6,
|
|
/* 15.6 us */
|
|
.refresh_period = (156 * (SDRAMC_BUS_HZ / 1000)) / 10000,
|
|
};
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
/* Enable SDRAM in the EBI mux */
|
|
hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
|
|
|
|
/* Enable 26 address bits and NCS2 */
|
|
portmux_enable_ebi(16, 26, PORTMUX_EBI_CS(2), PORTMUX_DRIVE_HIGH);
|
|
portmux_enable_usart1(PORTMUX_DRIVE_MIN);
|
|
|
|
/* de-assert "force sys reset" pin */
|
|
portmux_select_gpio(PORTMUX_PORT_D, 1 << 15,
|
|
PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
|
|
|
|
/* init custom i/o */
|
|
/* cpu type inputs */
|
|
portmux_select_gpio(PORTMUX_PORT_E, (1 << 19) | (1 << 20) | (1 << 23),
|
|
PORTMUX_DIR_INPUT);
|
|
/* main board type inputs */
|
|
portmux_select_gpio(PORTMUX_PORT_B, (1 << 19) | (1 << 29),
|
|
PORTMUX_DIR_INPUT);
|
|
/* DEBUG input (use weak pullup) */
|
|
portmux_select_gpio(PORTMUX_PORT_E, 1 << 21,
|
|
PORTMUX_DIR_INPUT | PORTMUX_PULL_UP);
|
|
|
|
/* are we suppressing the console ? */
|
|
if (gpio_get_value(GPIO_PIN_PE(21)) == 1)
|
|
gd->flags |= (GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE);
|
|
|
|
/* reset phys */
|
|
portmux_select_gpio(PORTMUX_PORT_E, 1 << 24, PORTMUX_DIR_INPUT);
|
|
portmux_select_gpio(PORTMUX_PORT_C, 1 << 18,
|
|
PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
|
|
|
|
udelay(5000);
|
|
|
|
/* release phys reset */
|
|
gpio_set_value(GPIO_PIN_PC(18), 0); /* PHY RESET (Release) */
|
|
|
|
/* setup Data Flash chip select (NCS2) */
|
|
hsmc3_writel(MODE2, 0x20121003);
|
|
hsmc3_writel(CYCLE2, 0x000a0009);
|
|
hsmc3_writel(PULSE2, 0x0a060806);
|
|
hsmc3_writel(SETUP2, 0x00030102);
|
|
|
|
/* setup FRAM chip select (NCS3) */
|
|
hsmc3_writel(MODE3, 0x10120001);
|
|
hsmc3_writel(CYCLE3, 0x001e001d);
|
|
hsmc3_writel(PULSE3, 0x08040704);
|
|
hsmc3_writel(SETUP3, 0x02050204);
|
|
|
|
#if defined(CONFIG_MACB)
|
|
/* init macb0 pins */
|
|
portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
|
|
portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
|
|
#endif
|
|
|
|
#if defined(CONFIG_MMC)
|
|
portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
|
|
#endif
|
|
|
|
#if defined(CONFIG_LCD)
|
|
portmux_enable_lcdc(1);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
unsigned long expected_size;
|
|
unsigned long actual_size;
|
|
void *sdram_base;
|
|
|
|
sdram_base = uncached(EBI_SDRAM_BASE);
|
|
|
|
expected_size = sdram_init(sdram_base, &sdram_config);
|
|
actual_size = get_ram_size(sdram_base, expected_size);
|
|
|
|
if (expected_size != actual_size)
|
|
printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
|
|
actual_size >> 20, expected_size >> 20);
|
|
|
|
return actual_size;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
gd->bd->bi_phy_id[0] = 0x01;
|
|
gd->bd->bi_phy_id[1] = 0x03;
|
|
return 0;
|
|
}
|
|
|
|
int board_postclk_init(void)
|
|
{
|
|
/* Use GCLK0 as 10MHz output */
|
|
gclk_enable_output(0, PORTMUX_DRIVE_LOW);
|
|
gclk_set_rate(0, GCLK_PARENT_OSC0, 10000000);
|
|
return 0;
|
|
}
|
|
|
|
/* SPI chip select control */
|
|
#ifdef CONFIG_ATMEL_SPI
|
|
#include <spi.h>
|
|
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
return (bus == 0) && (cs == 0);
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
}
|
|
#endif /* CONFIG_ATMEL_SPI */
|
|
|
|
#ifdef CONFIG_CMD_NET
|
|
int board_eth_init(bd_t *bi)
|
|
{
|
|
macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
|
|
macb_eth_initialize(1, (void *)MACB1_BASE, bi->bi_phy_id[1]);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|