Tudor Ambarus 1b0eec3c9f ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines ... The impedance of the QSPI PCB lines on the sama7g5ek is 50 Ohms. Align the output impedance of the QSPI0 HSIOs by setting a medium drive strength which corresponds to an impedance of 56 Ohms when VDD is in the 3.0V - 3.6V range. The high drive strength setting corresponds to an output impedance of 42 Ohms on the QSPI0 HSIOs. This is just a fine tunning. The memory that we have populated on sama7g5ek works fine even with high drive strength, but it's better to adjust it and use medium instead, in case some other flashes with higher frequencies are tested. Suggested-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>		2022-04-26 09:54:41 +03:00
..
cpu	arm: set cntfrq_el0 if CONFIG_COUNTER_FREQUENCY is valid	2022-04-21 15:27:18 -04:00
dts	ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines	2022-04-26 09:54:41 +03:00
include	pci: imx: remove weak overrides no longer used	2022-04-21 14:38:03 +02:00
lib	arm: Do not compile vector table when SYS_NO_VECTOR_TABLE is enabled	2022-04-21 12:31:36 +02:00
mach-apple	arm: apple: Point stdout-path to framebuffer when keyboard present	2022-04-22 15:56:39 -04:00
mach-aspeed
mach-at91	ARM: mach-at91: armv7: Remove default reset driver	2022-04-26 09:53:18 +03:00
mach-bcm283x	doc: replace @return by Return:	2022-01-19 18:11:34 +01:00
mach-bcmstb
mach-cortina
mach-davinci	Finish conversion of CONFIG_SYS_CLK_FREQ to Kconfig	2021-12-27 16:20:18 -05:00
mach-exynos	exynos: Drop CONFIG_CLK_*	2022-04-01 10:28:47 -04:00
mach-highbank
mach-imx	u-boot-imx-20220422	2022-04-22 08:12:20 -04:00
mach-integrator	arm: integrator: Migrate platform-specific options and cleanup armcoremodule.h	2022-04-08 09:05:19 -04:00
mach-ipq40xx
mach-k3	Merge branch '2022-04-04-platform-updates'	2022-04-05 13:45:22 -04:00
mach-keystone	arch/arm/mach-keystone/ddr3.c: Fix spelling of "resetting".	2022-01-13 07:57:50 -05:00
mach-kirkwood	keymile: Move sourcing of common Kconfig	2022-04-01 10:28:46 -04:00
mach-lpc32xx
mach-mediatek
mach-meson
mach-mvebu	arm: mvebu: a37xx: Add support for writing Security OTP values	2022-04-21 12:31:36 +02:00
mach-nexell	video: Drop references to CONFIG_VIDEO et al	2022-03-28 20:17:07 +02:00
mach-octeontx	Convert CONFIG_SYS_PCI_64BIT to Kconfig	2021-12-27 16:20:17 -05:00
mach-octeontx2	Convert CONFIG_SYS_PCI_64BIT to Kconfig	2021-12-27 16:20:17 -05:00
mach-omap2	arm: Introduce new CONFIG_SPL_SYS_NO_VECTOR_TABLE option	2022-04-21 12:31:36 +02:00
mach-orion5x	Convert CONFIG_88F5182 et al to Kconfig	2021-12-27 16:20:19 -05:00
mach-owl
mach-qemu
mach-rmobile	armv8: Fix and simplify branch_if_master/branch_if_slave	2022-03-02 13:59:29 -05:00
mach-rockchip	arm: set cntfrq_el0 if CONFIG_COUNTER_FREQUENCY is valid	2022-04-21 15:27:18 -04:00
mach-s5pc1xx	doc: replace @return by Return:	2022-01-19 18:11:34 +01:00
mach-snapdragon
mach-socfpga	iopoll: Extend read_poll_timeout macro to support variable parameters	2022-04-12 19:10:44 +02:00
mach-sti
mach-stm32
mach-stm32mp	spl: mmc: extend spl_mmc_boot_mode() to take mmc argument	2022-04-04 23:24:17 +01:00
mach-sunxi	sunxi: eMMC: Improve automatic boot source detection	2022-04-05 00:08:40 +01:00
mach-tegra	tegra: Migrate CI_UDC_HAS_HOSTPC to Kconfig	2022-04-08 09:05:19 -04:00
mach-u8500
mach-uniphier	spl: mmc: extend spl_mmc_boot_mode() to take mmc argument	2022-04-04 23:24:17 +01:00
mach-versal	arch: arm: move COUNTER_FREQUENCY from versal to arm	2022-04-21 14:32:40 -04:00
mach-versatile
mach-zynq	ARM: zynq: Fix debug uart initialization	2022-02-21 13:20:24 +01:00
mach-zynqmp	arm64: zynqmp: Fix debug uart initialization	2022-02-21 13:20:29 +01:00
mach-zynqmp-r5	Convert CONFIG_CPU_FREQ_HZ to Kconfig	2021-12-27 16:20:19 -05:00
thumb1/include/asm/proc-armv
config.mk
Kconfig	arm: apple: Point stdout-path to framebuffer when keyboard present	2022-04-22 15:56:39 -04:00
Kconfig.debug
Makefile