mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-11-28 23:23:30 +08:00
Code Issues Packages Projects Releases Wiki Activity
10697704ca
u-boot/arch/x86/Kconfig
Masahiro Yamada 326a682358 malloc_f: enable SYS_MALLOC_F by default if DM is on 
This option has a bool type, not hex.
Fix it and enable it if CONFIG_DM is on because Driver Model always
requires malloc memory.  Devices are scanned twice, before/after
relocation.  CONFIG_SYS_MALLOC_F should be enabled to use malloc
memory before relocation.  As it is board-independent, handle it
globally.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Robert Baldyga <r.baldyga@samsung.com>
2015-03-28 09:03:09 -04:00

456 lines
13 KiB
Plaintext
Raw Blame History

menu "x86 architecture"
depends on X86
config SYS_ARCH
default "x86"
config USE_PRIVATE_LIBGCC
default y
choice
prompt "Target select"
config TARGET_COREBOOT
bool "Support coreboot"
help
This target is used for running U-Boot on top of Coreboot. In
this case Coreboot does the early inititalisation, and U-Boot
takes over once the RAM, video and CPU are fully running.
U-Boot is loaded as a fallback payload from Coreboot, in
Coreboot terminology. This method was used for the Chromebook
Pixel when launched.
config TARGET_CHROMEBOOK_LINK
bool "Support Chromebook link"
help
This is the Chromebook Pixel released in 2013. It uses an Intel
i5 Ivybridge which is a die-shrink of Sandybridge, with 4GB of
SDRAM. It has a Panther Point platform controller hub, PCIe
WiFi and Bluetooth. It also includes a 720p webcam, USB SD
reader, microphone and speakers, display port and 32GB SATA
solid state drive. There is a Chrome OS EC connected on LPC,
and it provides a 2560x1700 high resolution touch-enabled LCD
display.
config TARGET_CROWNBAY
bool "Support Intel Crown Bay CRB"
help
This is the Intel Crown Bay Customer Reference Board. It contains
the Intel Atom Processor E6xx populated on the COM Express module
with 1GB DDR2 soldered down memory and a carrier board with the
Intel Platform Controller Hub EG20T, other system components and
peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS.
config TARGET_MINNOWMAX
bool "Support Intel Minnowboard MAX"
help
This is the Intel Minnowboard MAX. It contains an Atom E3800
processor in a small form factor with Ethernet, micro-SD, USB 2,
USB 3, SATA, serial console, some GPIOs and HDMI 1.3 video out.
It requires some binary blobs - see README.x86 for details.
Note that PCIE_ECAM_BASE is set up by the FSP so the value used
by U-Boot matches that value.
config TARGET_GALILEO
bool "Support Intel Galileo"
help
This is the Intel Galileo board, which is the first in a family of
Arduino-certified development and prototyping boards based on Intel
architecture. It includes an Intel Quark SoC X1000 processor, a 32-bit
single-core, single-thread, Intel Pentium processor instrunction set
architecture (ISA) compatible, operating at speeds up to 400Mhz,
along with 256MB DDR3 memory. It supports a wide range of industry
standard I/O interfaces, including a full-sized mini-PCIe slot,
one 100Mb Ethernet port, a microSD card slot, a USB host port and
a USB client port.
endchoice
config DM
default y
config DM_GPIO
default y
config DM_SERIAL
default y
config SYS_MALLOC_F_LEN
default 0x800
config RAMBASE
hex
default 0x100000
config XIP_ROM_SIZE
hex
depends on X86_RESET_VECTOR
default ROM_SIZE
config CPU_ADDR_BITS
int
default 36
config HPET_ADDRESS
hex
default 0xfed00000 if !HPET_ADDRESS_OVERRIDE
config SMM_TSEG
bool
default n
config SMM_TSEG_SIZE
hex
config X86_RESET_VECTOR
bool
default n
config SYS_X86_START16
hex
depends on X86_RESET_VECTOR
default 0xfffff800
config BOARD_ROMSIZE_KB_512
bool
config BOARD_ROMSIZE_KB_1024
bool
config BOARD_ROMSIZE_KB_2048
bool
config BOARD_ROMSIZE_KB_4096
bool
config BOARD_ROMSIZE_KB_8192
bool
config BOARD_ROMSIZE_KB_16384
bool
choice
prompt "ROM chip size"
depends on X86_RESET_VECTOR
default UBOOT_ROMSIZE_KB_512 if BOARD_ROMSIZE_KB_512
default UBOOT_ROMSIZE_KB_1024 if BOARD_ROMSIZE_KB_1024
default UBOOT_ROMSIZE_KB_2048 if BOARD_ROMSIZE_KB_2048
default UBOOT_ROMSIZE_KB_4096 if BOARD_ROMSIZE_KB_4096
default UBOOT_ROMSIZE_KB_8192 if BOARD_ROMSIZE_KB_8192
default UBOOT_ROMSIZE_KB_16384 if BOARD_ROMSIZE_KB_16384
help
Select the size of the ROM chip you intend to flash U-Boot on.
The build system will take care of creating a u-boot.rom file
of the matching size.
config UBOOT_ROMSIZE_KB_512
bool "512 KB"
help
Choose this option if you have a 512 KB ROM chip.
config UBOOT_ROMSIZE_KB_1024
bool "1024 KB (1 MB)"
help
Choose this option if you have a 1024 KB (1 MB) ROM chip.
config UBOOT_ROMSIZE_KB_2048
bool "2048 KB (2 MB)"
help
Choose this option if you have a 2048 KB (2 MB) ROM chip.
config UBOOT_ROMSIZE_KB_4096
bool "4096 KB (4 MB)"
help
Choose this option if you have a 4096 KB (4 MB) ROM chip.
config UBOOT_ROMSIZE_KB_8192
bool "8192 KB (8 MB)"
help
Choose this option if you have a 8192 KB (8 MB) ROM chip.
config UBOOT_ROMSIZE_KB_16384
bool "16384 KB (16 MB)"
help
Choose this option if you have a 16384 KB (16 MB) ROM chip.
endchoice
# Map the config names to an integer (KB).
config UBOOT_ROMSIZE_KB
int
default 512 if UBOOT_ROMSIZE_KB_512
default 1024 if UBOOT_ROMSIZE_KB_1024
default 2048 if UBOOT_ROMSIZE_KB_2048
default 4096 if UBOOT_ROMSIZE_KB_4096
default 8192 if UBOOT_ROMSIZE_KB_8192
default 16384 if UBOOT_ROMSIZE_KB_16384
# Map the config names to a hex value (bytes).
config ROM_SIZE
hex
default 0x80000 if UBOOT_ROMSIZE_KB_512
default 0x100000 if UBOOT_ROMSIZE_KB_1024
default 0x200000 if UBOOT_ROMSIZE_KB_2048
default 0x400000 if UBOOT_ROMSIZE_KB_4096
default 0x800000 if UBOOT_ROMSIZE_KB_8192
default 0xc00000 if UBOOT_ROMSIZE_KB_12288
default 0x1000000 if UBOOT_ROMSIZE_KB_16384
config HAVE_INTEL_ME
bool "Platform requires Intel Management Engine"
help
Newer higher-end devices have an Intel Management Engine (ME)
which is a very large binary blob (typically 1.5MB) which is
required for the platform to work. This enforces a particular
SPI flash format. You will need to supply the me.bin file in
your board directory.
config X86_RAMTEST
bool "Perform a simple RAM test after SDRAM initialisation"
help
If there is something wrong with SDRAM then the platform will
often crash within U-Boot or the kernel. This option enables a
very simple RAM test that quickly checks whether the SDRAM seems
to work correctly. It is not exhaustive but can save time by
detecting obvious failures.
config MARK_GRAPHICS_MEM_WRCOMB
bool "Mark graphics memory as write-combining."
default n
help
The graphics performance may increase if the graphics
memory is set as write-combining cache type. This option
enables marking the graphics memory as write-combining.
menu "Display"
config FRAMEBUFFER_SET_VESA_MODE
prompt "Set framebuffer graphics resolution"
bool
help
Set VESA/native framebuffer mode (needed for bootsplash and graphical framebuffer console)
choice
prompt "framebuffer graphics resolution"
default FRAMEBUFFER_VESA_MODE_117
depends on FRAMEBUFFER_SET_VESA_MODE
help
This option sets the resolution used for the coreboot framebuffer (and
bootsplash screen).
config FRAMEBUFFER_VESA_MODE_100
bool "640x400 256-color"
config FRAMEBUFFER_VESA_MODE_101
bool "640x480 256-color"
config FRAMEBUFFER_VESA_MODE_102
bool "800x600 16-color"
config FRAMEBUFFER_VESA_MODE_103
bool "800x600 256-color"
config FRAMEBUFFER_VESA_MODE_104
bool "1024x768 16-color"
config FRAMEBUFFER_VESA_MODE_105
bool "1024x7686 256-color"
config FRAMEBUFFER_VESA_MODE_106
bool "1280x1024 16-color"
config FRAMEBUFFER_VESA_MODE_107
bool "1280x1024 256-color"
config FRAMEBUFFER_VESA_MODE_108
bool "80x60 text"
config FRAMEBUFFER_VESA_MODE_109
bool "132x25 text"
config FRAMEBUFFER_VESA_MODE_10A
bool "132x43 text"
config FRAMEBUFFER_VESA_MODE_10B
bool "132x50 text"
config FRAMEBUFFER_VESA_MODE_10C
bool "132x60 text"
config FRAMEBUFFER_VESA_MODE_10D
bool "320x200 32k-color (1:5:5:5)"
config FRAMEBUFFER_VESA_MODE_10E
bool "320x200 64k-color (5:6:5)"
config FRAMEBUFFER_VESA_MODE_10F
bool "320x200 16.8M-color (8:8:8)"
config FRAMEBUFFER_VESA_MODE_110
bool "640x480 32k-color (1:5:5:5)"
config FRAMEBUFFER_VESA_MODE_111
bool "640x480 64k-color (5:6:5)"
config FRAMEBUFFER_VESA_MODE_112
bool "640x480 16.8M-color (8:8:8)"
config FRAMEBUFFER_VESA_MODE_113
bool "800x600 32k-color (1:5:5:5)"
config FRAMEBUFFER_VESA_MODE_114
bool "800x600 64k-color (5:6:5)"
config FRAMEBUFFER_VESA_MODE_115
bool "800x600 16.8M-color (8:8:8)"
config FRAMEBUFFER_VESA_MODE_116
bool "1024x768 32k-color (1:5:5:5)"
config FRAMEBUFFER_VESA_MODE_117
bool "1024x768 64k-color (5:6:5)"
config FRAMEBUFFER_VESA_MODE_118
bool "1024x768 16.8M-color (8:8:8)"
config FRAMEBUFFER_VESA_MODE_119
bool "1280x1024 32k-color (1:5:5:5)"
config FRAMEBUFFER_VESA_MODE_11A
bool "1280x1024 64k-color (5:6:5)"
config FRAMEBUFFER_VESA_MODE_11B
bool "1280x1024 16.8M-color (8:8:8)"
config FRAMEBUFFER_VESA_MODE_USER
bool "Manually select VESA mode"
endchoice
# Map the config names to an integer (KB).
config FRAMEBUFFER_VESA_MODE
prompt "VESA mode" if FRAMEBUFFER_VESA_MODE_USER
hex
default 0x100 if FRAMEBUFFER_VESA_MODE_100
default 0x101 if FRAMEBUFFER_VESA_MODE_101
default 0x102 if FRAMEBUFFER_VESA_MODE_102
default 0x103 if FRAMEBUFFER_VESA_MODE_103
default 0x104 if FRAMEBUFFER_VESA_MODE_104
default 0x105 if FRAMEBUFFER_VESA_MODE_105
default 0x106 if FRAMEBUFFER_VESA_MODE_106
default 0x107 if FRAMEBUFFER_VESA_MODE_107
default 0x108 if FRAMEBUFFER_VESA_MODE_108
default 0x109 if FRAMEBUFFER_VESA_MODE_109
default 0x10A if FRAMEBUFFER_VESA_MODE_10A
default 0x10B if FRAMEBUFFER_VESA_MODE_10B
default 0x10C if FRAMEBUFFER_VESA_MODE_10C
default 0x10D if FRAMEBUFFER_VESA_MODE_10D
default 0x10E if FRAMEBUFFER_VESA_MODE_10E
default 0x10F if FRAMEBUFFER_VESA_MODE_10F
default 0x110 if FRAMEBUFFER_VESA_MODE_110
default 0x111 if FRAMEBUFFER_VESA_MODE_111
default 0x112 if FRAMEBUFFER_VESA_MODE_112
default 0x113 if FRAMEBUFFER_VESA_MODE_113
default 0x114 if FRAMEBUFFER_VESA_MODE_114
default 0x115 if FRAMEBUFFER_VESA_MODE_115
default 0x116 if FRAMEBUFFER_VESA_MODE_116
default 0x117 if FRAMEBUFFER_VESA_MODE_117
default 0x118 if FRAMEBUFFER_VESA_MODE_118
default 0x119 if FRAMEBUFFER_VESA_MODE_119
default 0x11A if FRAMEBUFFER_VESA_MODE_11A
default 0x11B if FRAMEBUFFER_VESA_MODE_11B
default 0x117 if FRAMEBUFFER_VESA_MODE_USER
endmenu
config HAVE_FSP
bool "Add an Firmware Support Package binary"
help
Select this option to add an Firmware Support Package binary to
the resulting U-Boot image. It is a binary blob which U-Boot uses
to set up SDRAM and other chipset specific initialization.
Note: Without this binary U-Boot will not be able to set up its
SDRAM so will not boot.
config FSP_FILE
string "Firmware Support Package binary filename"
depends on HAVE_FSP
default "fsp.bin"
help
The filename of the file to use as Firmware Support Package binary
in the board directory.
config FSP_ADDR
hex "Firmware Support Package binary location"
depends on HAVE_FSP
default 0xfffc0000
help
FSP is not Position Independent Code (PIC) and the whole FSP has to
be rebased if it is placed at a location which is different from the
perferred base address specified during the FSP build. Use Intel's
Binary Configuration Tool (BCT) to do the rebase.
The default base address of 0xfffc0000 indicates that the binary must
be located at offset 0xc0000 from the beginning of a 1MB flash device.
config FSP_TEMP_RAM_ADDR
hex
default 0x2000000
help
Stack top address which is used in FspInit after DRAM is ready and
CAR is disabled.
source "arch/x86/cpu/baytrail/Kconfig"
source "arch/x86/cpu/coreboot/Kconfig"
source "arch/x86/cpu/ivybridge/Kconfig"
source "arch/x86/cpu/quark/Kconfig"
source "arch/x86/cpu/queensbay/Kconfig"
config TSC_CALIBRATION_BYPASS
bool "Bypass Time-Stamp Counter (TSC) calibration"
default n
help
By default U-Boot automatically calibrates Time-Stamp Counter (TSC)
running frequency via Model-Specific Register (MSR) and Programmable
Interval Timer (PIT). If the calibration does not work on your board,
select this option and provide a hardcoded TSC running frequency with
CONFIG_TSC_FREQ_IN_MHZ below.
Normally this option should be turned on in a simulation environment
like qemu.
config TSC_FREQ_IN_MHZ
int "Time-Stamp Counter (TSC) running frequency in MHz"
depends on TSC_CALIBRATION_BYPASS
default 1000
help
The running frequency in MHz of Time-Stamp Counter (TSC).
source "board/coreboot/coreboot/Kconfig"
source "board/google/chromebook_link/Kconfig"
source "board/intel/crownbay/Kconfig"
source "board/intel/minnowmax/Kconfig"
source "board/intel/galileo/Kconfig"
config PCIE_ECAM_BASE
hex
default 0xe0000000
help
This is the memory-mapped address of PCI configuration space, which
is only available through the Enhanced Configuration Access
Mechanism (ECAM) with PCI Express. It can be set up almost
anywhere. Before it is set up, it is possible to access PCI
configuration space through I/O access, but memory access is more
convenient. Using this, PCI can be scanned and configured. This
should be set to a region that does not conflict with memory
assigned to PCI devices - i.e. the memory and prefetch regions, as
passed to pci_set_region().
endmenu
Reference in New Issue View Git Blame Copy Permalink