u-boot/include/configs/rcar-gen3-common.h
Marek Vasut 10fa7ec9f6 ARM: rmobile: Increase PHY auto-negotiation timeout to 20s
The ethernet PHY on all known Gen3 boards takes a while to come out
of reset, increase the auto-negotiation timeout to prevent it from
timing out in case the ethernet is used right after the board was
reset.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-06-18 19:35:03 +02:00

86 lines
2.3 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* include/configs/rcar-gen3-common.h
* This file is R-Car Gen3 common configuration file.
*
* Copyright (C) 2015-2017 Renesas Electronics Corporation
*/
#ifndef __RCAR_GEN3_COMMON_H
#define __RCAR_GEN3_COMMON_H
#include <asm/arch/rmobile.h>
#define CONFIG_REMAKE_ELF
#ifdef CONFIG_SPL
#define CONFIG_SPL_TARGET "spl/u-boot-spl.scif"
#endif
/* boot option */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
/* Generic Interrupt Controller Definitions */
#define CONFIG_GICV2
#define GICD_BASE 0xF1010000
#define GICC_BASE 0xF1020000
/* console */
#define CONFIG_SYS_CBSIZE 2048
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_MAXARGS 64
#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400 }
/* PHY needs a longer autoneg timeout */
#define PHY_ANEG_TIMEOUT 20000
/* MEMORY */
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
#define DRAM_RSV_SIZE 0x08000000
#define CONFIG_SYS_SDRAM_BASE (0x40000000 + DRAM_RSV_SIZE)
#define CONFIG_SYS_SDRAM_SIZE (0x80000000u - DRAM_RSV_SIZE)
#define CONFIG_SYS_LOAD_ADDR 0x58000000
#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
#define CONFIG_VERY_BIG_RAM
#define CONFIG_MAX_MEM_MAPPED (0x80000000u - DRAM_RSV_SIZE)
#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_SYS_MONITOR_LEN (1 * 1024 * 1024)
#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
#define CONFIG_SYS_BOOTM_LEN (64 << 20)
/* The HF/QSPI layout permits up to 1 MiB large bootloader blob */
#define CONFIG_BOARD_SIZE_LIMIT 1048576
/* ENV setting */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootm_size=0x10000000\0"
#define CONFIG_BOOTCOMMAND \
"tftp 0x48080000 Image; " \
"tftp 0x48000000 Image-"CONFIG_DEFAULT_FDT_FILE"; " \
"booti 0x48080000 - 0x48000000"
/* SPL support */
#if defined(CONFIG_R8A7795) || defined(CONFIG_R8A7796) || defined(CONFIG_R8A77965)
#define CONFIG_SPL_BSS_START_ADDR 0xe633f000
#define CONFIG_SPL_BSS_MAX_SIZE 0x1000
#else
#define CONFIG_SPL_BSS_START_ADDR 0xe631f000
#define CONFIG_SPL_BSS_MAX_SIZE 0x1000
#endif
#define CONFIG_SPL_STACK 0xe6304000
#define CONFIG_SPL_MAX_SIZE 0x7000
#ifdef CONFIG_SPL_BUILD
#define CONFIG_CONS_SCIF2
#define CONFIG_SH_SCIF_CLK_FREQ 65000000
#endif
#endif /* __RCAR_GEN3_COMMON_H */