u-boot/include/configs/km8360.h
Holger Brunck be7576fa15 powerpc/83xx: use NAND_ECC_BCH for kmcoge5ne
Switch from 1-bit ecc to 4-bit ecc.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
2013-02-15 17:47:20 -06:00

292 lines
7.2 KiB
C

/*
* (C) Copyright 2012
* Holger Brunck, Keymile GmbH Hannover, <holger.brunck@keymile.com>
* Christian Herzig, Keymile AG Switzerland, <christian.herzig@keymile.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/* KMBEC FPGA (PRIO) */
#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000
#define CONFIG_SYS_KMBEC_FPGA_SIZE 64
#if defined CONFIG_KMETER1
#define CONFIG_HOSTNAME kmeter1
#define CONFIG_KM_BOARD_NAME "kmeter1"
#define CONFIG_KM_DEF_NETDEV "netdev=eth2\0"
#elif defined CONFIG_KMCOGE5NE
#define CONFIG_HOSTNAME kmcoge5ne
#define CONFIG_KM_BOARD_NAME "kmcoge5ne"
#define CONFIG_KM_DEF_NETDEV "netdev=eth1\0"
#define CONFIG_CMD_NAND
#define CONFIG_NAND_ECC_BCH
#define CONFIG_BCH
#define CONFIG_NAND_KMETER1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0"
#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1"
#define MTDIDS_DEFAULT "nor0=boot,nand0=app"
#define MTDPARTS_DEFAULT "mtdparts=" \
"boot:" \
"768k(u-boot)," \
"128k(env)," \
"128k(envred)," \
"-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");" \
"app:" \
"-(" CONFIG_KM_UBI_PARTITION_NAME_APP ");"
#else
#error ("Board not supported")
#endif
/*
* High Level Configuration Options
*/
#define CONFIG_QE /* Has QE */
#define CONFIG_MPC8360 /* MPC8360 CPU specific */
#define CONFIG_SYS_TEXT_BASE 0xF0000000
/* include common defines/options for all 83xx Keymile boards */
#include "km/km83xx-common.h"
/*
* System IO Setup
*/
#define CONFIG_SYS_SICRH (SICRH_UC1EOBI | SICRH_UC2E1OBI)
/*
* Hardware Reset Configuration Word
*/
#define CONFIG_SYS_HRCW_LOW (\
HRCWL_CSB_TO_CLKIN_4X1 | \
HRCWL_CORE_TO_CSB_2X1 | \
HRCWL_CE_PLL_VCO_DIV_2 | \
HRCWL_CE_TO_PLL_1X6)
#define CONFIG_SYS_HRCW_HIGH (\
HRCWH_CORE_ENABLE | \
HRCWH_FROM_0X00000100 | \
HRCWH_BOOTSEQ_DISABLE | \
HRCWH_SW_WATCHDOG_DISABLE | \
HRCWH_ROM_LOC_LOCAL_16BIT | \
HRCWH_BIG_ENDIAN | \
HRCWH_LALE_EARLY | \
HRCWH_LDP_CLEAR)
/**
* DDR RAM settings
*/
#define CONFIG_SYS_DDR_SDRAM_CFG (\
SDRAM_CFG_SDRAM_TYPE_DDR2 | \
SDRAM_CFG_SREN | \
SDRAM_CFG_HSE)
#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000
#ifdef CONFIG_KMCOGE5NE
/**
* KMCOGE5NE has 512 MB RAM
*/
#define CONFIG_SYS_DDR_CS0_CONFIG (\
CSCONFIG_EN | \
CSCONFIG_AP | \
CSCONFIG_ODT_RD_ONLY_CURRENT | \
CSCONFIG_BANK_BIT_3 | \
CSCONFIG_ROW_BIT_13 | \
CSCONFIG_COL_BIT_10)
#else
#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \
CSCONFIG_ROW_BIT_13 | \
CSCONFIG_COL_BIT_10 | \
CSCONFIG_ODT_RD_ONLY_CURRENT)
#endif
#define CONFIG_SYS_DDR_CLK_CNTL (\
DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
#define CONFIG_SYS_DDR_INTERVAL (\
(0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
(0x203 << SDRAM_INTERVAL_REFINT_SHIFT))
#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f
#define CONFIG_SYS_DDRCDR (\
DDRCDR_EN | \
DDRCDR_Q_DRN)
#define CONFIG_SYS_DDR_MODE 0x47860452
#define CONFIG_SYS_DDR_MODE2 0x8080c000
#define CONFIG_SYS_DDR_TIMING_0 (\
(2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
(8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
(6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
(2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
(0 << TIMING_CFG0_WWT_SHIFT) | \
(0 << TIMING_CFG0_RRT_SHIFT) | \
(0 << TIMING_CFG0_WRT_SHIFT) | \
(0 << TIMING_CFG0_RWT_SHIFT))
#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \
(2 << TIMING_CFG1_WRTORD_SHIFT) | \
(2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
(3 << TIMING_CFG1_WRREC_SHIFT) | \
(7 << TIMING_CFG1_REFREC_SHIFT) | \
(3 << TIMING_CFG1_ACTTORW_SHIFT) | \
(8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
(3 << TIMING_CFG1_PRETOACT_SHIFT))
#define CONFIG_SYS_DDR_TIMING_2 (\
(0xa << TIMING_CFG2_FOUR_ACT_SHIFT) | \
(3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
(2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
(2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
(4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
(5 << TIMING_CFG2_CPO_SHIFT) | \
(0 << TIMING_CFG2_ADD_LAT_SHIFT))
#define CONFIG_SYS_DDR_TIMING_3 0x00000000
/* EEprom support */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
/*
* Local Bus Configuration & Clock Setup
*/
#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
#define CONFIG_SYS_LCRR_EADC LCRR_EADC_2
#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
/*
* PAXE on the local bus CS3
*/
#define CONFIG_SYS_PAXE_BASE 0xA0000000
#define CONFIG_SYS_PAXE_SIZE 256
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE
#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000001C /* 512MB window size */
#define CONFIG_SYS_BR3_PRELIM (\
CONFIG_SYS_PAXE_BASE | \
(1 << BR_PS_SHIFT) | \
BR_V)
#define CONFIG_SYS_OR3_PRELIM (\
MEG_TO_AM(CONFIG_SYS_PAXE_SIZE) | \
OR_GPCM_CSNT | \
OR_GPCM_ACS_DIV2 | \
OR_GPCM_SCY_2 | \
OR_GPCM_TRLX | \
OR_GPCM_EAD)
#ifdef CONFIG_KMCOGE5NE
/*
* BFTIC3 on the local bus CS4
*/
#define CONFIG_SYS_BFTIC3_BASE 0xB0000000
#define CONFIG_SYS_BFTIC3_SIZE 256
#define CONFIG_SYS_BR4_PRELIM (\
CONFIG_SYS_BFTIC3_BASE |\
(1 << BR_PS_SHIFT) | \
BR_V)
#define CONFIG_SYS_OR4_PRELIM (\
MEG_TO_AM(CONFIG_SYS_BFTIC3_SIZE) |\
OR_GPCM_CSNT | \
OR_GPCM_ACS_DIV2 |\
OR_GPCM_SCY_2 |\
OR_GPCM_TRLX |\
OR_GPCM_EAD)
#endif
/*
* MMU Setup
*/
/* PAXE: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT5L (\
CONFIG_SYS_PAXE_BASE | \
BATL_PP_10 | \
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT5U (\
CONFIG_SYS_PAXE_BASE | \
BATU_BL_256M | \
BATU_VS | \
BATU_VP)
#define CONFIG_SYS_DBAT5L (\
CONFIG_SYS_PAXE_BASE | \
BATL_PP_10 | \
BATL_CACHEINHIBIT | \
BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
#ifdef CONFIG_KMCOGE5NE
/* BFTIC3: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT6L (\
CONFIG_SYS_BFTIC3_BASE | \
BATL_PP_10 | \
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT6U (\
CONFIG_SYS_BFTIC3_BASE | \
BATU_BL_256M | \
BATU_VS | \
BATU_VP)
#define CONFIG_SYS_DBAT6L (\
CONFIG_SYS_BFTIC3_BASE | \
BATL_PP_10 | \
BATL_CACHEINHIBIT | \
BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
/* DDR/LBC SDRAM next 256M: cacheable */
#define CONFIG_SYS_IBAT7L (\
CONFIG_SYS_SDRAM_BASE2 |\
BATL_PP_10 |\
BATL_CACHEINHIBIT |\
BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT7U (\
CONFIG_SYS_SDRAM_BASE2 |\
BATU_BL_256M |\
BATU_VS |\
BATU_VP)
/* enable POST tests */
#define CONFIG_POST (CONFIG_SYS_POST_MEMORY|CONFIG_SYS_POST_MEM_REGIONS)
#define CONFIG_POST_EXTERNAL_WORD_FUNCS /* use own functions, not generic */
#define CPM_POST_WORD_ADDR CONFIG_SYS_MEMTEST_END
#define CONFIG_TESTPIN_REG gprt3 /* for kmcoge5ne */
#define CONFIG_TESTPIN_MASK 0x20 /* for kmcoge5ne */
#define CONFIG_CMD_DIAG /* so that testpin is inquired for POST test */
#else
#define CONFIG_SYS_IBAT6L (0)
#define CONFIG_SYS_IBAT6U (0)
#define CONFIG_SYS_IBAT7L (0)
#define CONFIG_SYS_IBAT7U (0)
#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
#endif
#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
#endif /* CONFIG */