u-boot/drivers/video/da8xx-fb.c
Anatolij Gustschin 6ed076cdda drivers/video/da8xx-fb.c: Fix GCC 4.6 warning
Fix:
da8xx-fb.c: In function 'video_hw_init':
da8xx-fb.c:688:6: warning: variable 'ret' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16 21:36:08 +01:00

844 lines
20 KiB
C

/*
* Porting to u-boot:
*
* (C) Copyright 2011
* Stefano Babic, DENX Software Engineering, sbabic@denx.de.
*
* Copyright (C) 2008-2009 MontaVista Software Inc.
* Copyright (C) 2008-2009 Texas Instruments Inc
*
* Based on the LCD driver for TI Avalanche processors written by
* Ajay Singh and Shalom Hai.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option)any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <common.h>
#include <malloc.h>
#include <video_fb.h>
#include <linux/list.h>
#include <linux/fb.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include "videomodes.h"
#include <asm/arch/da8xx-fb.h>
#define DRIVER_NAME "da8xx_lcdc"
/* LCD Status Register */
#define LCD_END_OF_FRAME1 (1 << 9)
#define LCD_END_OF_FRAME0 (1 << 8)
#define LCD_PL_LOAD_DONE (1 << 6)
#define LCD_FIFO_UNDERFLOW (1 << 5)
#define LCD_SYNC_LOST (1 << 2)
/* LCD DMA Control Register */
#define LCD_DMA_BURST_SIZE(x) ((x) << 4)
#define LCD_DMA_BURST_1 0x0
#define LCD_DMA_BURST_2 0x1
#define LCD_DMA_BURST_4 0x2
#define LCD_DMA_BURST_8 0x3
#define LCD_DMA_BURST_16 0x4
#define LCD_END_OF_FRAME_INT_ENA (1 << 2)
#define LCD_DUAL_FRAME_BUFFER_ENABLE (1 << 0)
/* LCD Control Register */
#define LCD_CLK_DIVISOR(x) ((x) << 8)
#define LCD_RASTER_MODE 0x01
/* LCD Raster Control Register */
#define LCD_PALETTE_LOAD_MODE(x) ((x) << 20)
#define PALETTE_AND_DATA 0x00
#define PALETTE_ONLY 0x01
#define DATA_ONLY 0x02
#define LCD_MONO_8BIT_MODE (1 << 9)
#define LCD_RASTER_ORDER (1 << 8)
#define LCD_TFT_MODE (1 << 7)
#define LCD_UNDERFLOW_INT_ENA (1 << 6)
#define LCD_PL_ENABLE (1 << 4)
#define LCD_MONOCHROME_MODE (1 << 1)
#define LCD_RASTER_ENABLE (1 << 0)
#define LCD_TFT_ALT_ENABLE (1 << 23)
#define LCD_STN_565_ENABLE (1 << 24)
/* LCD Raster Timing 2 Register */
#define LCD_AC_BIAS_TRANSITIONS_PER_INT(x) ((x) << 16)
#define LCD_AC_BIAS_FREQUENCY(x) ((x) << 8)
#define LCD_SYNC_CTRL (1 << 25)
#define LCD_SYNC_EDGE (1 << 24)
#define LCD_INVERT_PIXEL_CLOCK (1 << 22)
#define LCD_INVERT_LINE_CLOCK (1 << 21)
#define LCD_INVERT_FRAME_CLOCK (1 << 20)
/* LCD Block */
struct da8xx_lcd_regs {
u32 revid;
u32 ctrl;
u32 stat;
u32 lidd_ctrl;
u32 lidd_cs0_conf;
u32 lidd_cs0_addr;
u32 lidd_cs0_data;
u32 lidd_cs1_conf;
u32 lidd_cs1_addr;
u32 lidd_cs1_data;
u32 raster_ctrl;
u32 raster_timing_0;
u32 raster_timing_1;
u32 raster_timing_2;
u32 raster_subpanel;
u32 reserved;
u32 dma_ctrl;
u32 dma_frm_buf_base_addr_0;
u32 dma_frm_buf_ceiling_addr_0;
u32 dma_frm_buf_base_addr_1;
u32 dma_frm_buf_ceiling_addr_1;
};
#define LCD_NUM_BUFFERS 1
#define WSI_TIMEOUT 50
#define PALETTE_SIZE 256
#define LEFT_MARGIN 64
#define RIGHT_MARGIN 64
#define UPPER_MARGIN 32
#define LOWER_MARGIN 32
#define calc_fbsize() (panel.plnSizeX * panel.plnSizeY * panel.gdfBytesPP)
#define mdelay(n) ({unsigned long msec = (n); while (msec--) udelay(1000); })
static struct da8xx_lcd_regs *da8xx_fb_reg_base;
DECLARE_GLOBAL_DATA_PTR;
/* graphics setup */
static GraphicDevice gpanel;
static const struct da8xx_panel *lcd_panel;
static struct fb_info *da8xx_fb_info;
static int bits_x_pixel;
static inline unsigned int lcdc_read(u32 *addr)
{
return (unsigned int)readl(addr);
}
static inline void lcdc_write(unsigned int val, u32 *addr)
{
writel(val, addr);
}
struct da8xx_fb_par {
u32 p_palette_base;
unsigned char *v_palette_base;
dma_addr_t vram_phys;
unsigned long vram_size;
void *vram_virt;
unsigned int dma_start;
unsigned int dma_end;
struct clk *lcdc_clk;
int irq;
unsigned short pseudo_palette[16];
unsigned int palette_sz;
unsigned int pxl_clk;
int blank;
int vsync_flag;
int vsync_timeout;
};
/* Variable Screen Information */
static struct fb_var_screeninfo da8xx_fb_var = {
.xoffset = 0,
.yoffset = 0,
.transp = {0, 0, 0},
.nonstd = 0,
.activate = 0,
.height = -1,
.width = -1,
.pixclock = 46666, /* 46us - AUO display */
.accel_flags = 0,
.left_margin = LEFT_MARGIN,
.right_margin = RIGHT_MARGIN,
.upper_margin = UPPER_MARGIN,
.lower_margin = LOWER_MARGIN,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED
};
static struct fb_fix_screeninfo da8xx_fb_fix = {
.id = "DA8xx FB Drv",
.type = FB_TYPE_PACKED_PIXELS,
.type_aux = 0,
.visual = FB_VISUAL_PSEUDOCOLOR,
.xpanstep = 0,
.ypanstep = 1,
.ywrapstep = 0,
.accel = FB_ACCEL_NONE
};
static const struct display_panel disp_panel = {
QVGA,
16,
16,
COLOR_ACTIVE,
};
static const struct lcd_ctrl_config lcd_cfg = {
&disp_panel,
.ac_bias = 255,
.ac_bias_intrpt = 0,
.dma_burst_sz = 16,
.bpp = 16,
.fdd = 255,
.tft_alt_mode = 0,
.stn_565_mode = 0,
.mono_8bit_mode = 0,
.invert_line_clock = 1,
.invert_frm_clock = 1,
.sync_edge = 0,
.sync_ctrl = 1,
.raster_order = 0,
};
/* Enable the Raster Engine of the LCD Controller */
static inline void lcd_enable_raster(void)
{
u32 reg;
reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
if (!(reg & LCD_RASTER_ENABLE))
lcdc_write(reg | LCD_RASTER_ENABLE,
&da8xx_fb_reg_base->raster_ctrl);
}
/* Disable the Raster Engine of the LCD Controller */
static inline void lcd_disable_raster(void)
{
u32 reg;
reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
if (reg & LCD_RASTER_ENABLE)
lcdc_write(reg & ~LCD_RASTER_ENABLE,
&da8xx_fb_reg_base->raster_ctrl);
}
static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
{
u32 start;
u32 end;
u32 reg_ras;
u32 reg_dma;
/* init reg to clear PLM (loading mode) fields */
reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
reg_ras &= ~(3 << 20);
reg_dma = lcdc_read(&da8xx_fb_reg_base->dma_ctrl);
if (load_mode == LOAD_DATA) {
start = par->dma_start;
end = par->dma_end;
reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY);
reg_dma |= LCD_END_OF_FRAME_INT_ENA;
#if (LCD_NUM_BUFFERS == 2)
reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE;
lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_1);
lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1);
#else
reg_dma &= ~LCD_DUAL_FRAME_BUFFER_ENABLE;
lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
lcdc_write(0, &da8xx_fb_reg_base->dma_frm_buf_base_addr_1);
lcdc_write(0, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1);
#endif
} else if (load_mode == LOAD_PALETTE) {
start = par->p_palette_base;
end = start + par->palette_sz - 1;
reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY);
reg_ras |= LCD_PL_ENABLE;
lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
}
lcdc_write(reg_dma, &da8xx_fb_reg_base->dma_ctrl);
lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl);
/*
* The Raster enable bit must be set after all other control fields are
* set.
*/
lcd_enable_raster();
}
/* Configure the Burst Size of DMA */
static int lcd_cfg_dma(int burst_size)
{
u32 reg;
reg = lcdc_read(&da8xx_fb_reg_base->dma_ctrl) & 0x00000001;
switch (burst_size) {
case 1:
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_1);
break;
case 2:
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_2);
break;
case 4:
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_4);
break;
case 8:
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_8);
break;
case 16:
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16);
break;
default:
return -EINVAL;
}
lcdc_write(reg, &da8xx_fb_reg_base->dma_ctrl);
return 0;
}
static void lcd_cfg_ac_bias(int period, int transitions_per_int)
{
u32 reg;
/* Set the AC Bias Period and Number of Transisitons per Interrupt */
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2) & 0xFFF00000;
reg |= LCD_AC_BIAS_FREQUENCY(period) |
LCD_AC_BIAS_TRANSITIONS_PER_INT(transitions_per_int);
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2);
}
static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width,
int front_porch)
{
u32 reg;
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0) & 0xf;
reg |= ((back_porch & 0xff) << 24)
| ((front_porch & 0xff) << 16)
| ((pulse_width & 0x3f) << 10);
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0);
}
static void lcd_cfg_vertical_sync(int back_porch, int pulse_width,
int front_porch)
{
u32 reg;
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1) & 0x3ff;
reg |= ((back_porch & 0xff) << 24)
| ((front_porch & 0xff) << 16)
| ((pulse_width & 0x3f) << 10);
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1);
}
static int lcd_cfg_display(const struct lcd_ctrl_config *cfg)
{
u32 reg;
reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(LCD_TFT_MODE |
LCD_MONO_8BIT_MODE |
LCD_MONOCHROME_MODE);
switch (cfg->p_disp_panel->panel_shade) {
case MONOCHROME:
reg |= LCD_MONOCHROME_MODE;
if (cfg->mono_8bit_mode)
reg |= LCD_MONO_8BIT_MODE;
break;
case COLOR_ACTIVE:
reg |= LCD_TFT_MODE;
if (cfg->tft_alt_mode)
reg |= LCD_TFT_ALT_ENABLE;
break;
case COLOR_PASSIVE:
if (cfg->stn_565_mode)
reg |= LCD_STN_565_ENABLE;
break;
default:
return -EINVAL;
}
/* enable additional interrupts here */
reg |= LCD_UNDERFLOW_INT_ENA;
lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl);
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2);
if (cfg->sync_ctrl)
reg |= LCD_SYNC_CTRL;
else
reg &= ~LCD_SYNC_CTRL;
if (cfg->sync_edge)
reg |= LCD_SYNC_EDGE;
else
reg &= ~LCD_SYNC_EDGE;
if (cfg->invert_line_clock)
reg |= LCD_INVERT_LINE_CLOCK;
else
reg &= ~LCD_INVERT_LINE_CLOCK;
if (cfg->invert_frm_clock)
reg |= LCD_INVERT_FRAME_CLOCK;
else
reg &= ~LCD_INVERT_FRAME_CLOCK;
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2);
return 0;
}
static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height,
u32 bpp, u32 raster_order)
{
u32 reg;
/* Set the Panel Width */
/* Pixels per line = (PPL + 1)*16 */
/*0x3F in bits 4..9 gives max horisontal resolution = 1024 pixels*/
width &= 0x3f0;
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0);
reg &= 0xfffffc00;
reg |= ((width >> 4) - 1) << 4;
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0);
/* Set the Panel Height */
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1);
reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00);
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1);
/* Set the Raster Order of the Frame Buffer */
reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(1 << 8);
if (raster_order)
reg |= LCD_RASTER_ORDER;
lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl);
switch (bpp) {
case 1:
case 2:
case 4:
case 16:
par->palette_sz = 16 * 2;
break;
case 8:
par->palette_sz = 256 * 2;
break;
default:
return -EINVAL;
}
return 0;
}
static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
unsigned blue, unsigned transp,
struct fb_info *info)
{
struct da8xx_fb_par *par = info->par;
unsigned short *palette = (unsigned short *) par->v_palette_base;
u_short pal;
int update_hw = 0;
if (regno > 255)
return 1;
if (info->fix.visual == FB_VISUAL_DIRECTCOLOR)
return 1;
if (info->var.bits_per_pixel == 8) {
red >>= 4;
green >>= 8;
blue >>= 12;
pal = (red & 0x0f00);
pal |= (green & 0x00f0);
pal |= (blue & 0x000f);
if (palette[regno] != pal) {
update_hw = 1;
palette[regno] = pal;
}
} else if ((info->var.bits_per_pixel == 16) && regno < 16) {
red >>= (16 - info->var.red.length);
red <<= info->var.red.offset;
green >>= (16 - info->var.green.length);
green <<= info->var.green.offset;
blue >>= (16 - info->var.blue.length);
blue <<= info->var.blue.offset;
par->pseudo_palette[regno] = red | green | blue;
if (palette[0] != 0x4000) {
update_hw = 1;
palette[0] = 0x4000;
}
}
/* Update the palette in the h/w as needed. */
if (update_hw)
lcd_blit(LOAD_PALETTE, par);
return 0;
}
static void lcd_reset(struct da8xx_fb_par *par)
{
/* Disable the Raster if previously Enabled */
lcd_disable_raster();
/* DMA has to be disabled */
lcdc_write(0, &da8xx_fb_reg_base->dma_ctrl);
lcdc_write(0, &da8xx_fb_reg_base->raster_ctrl);
}
static void lcd_calc_clk_divider(struct da8xx_fb_par *par)
{
unsigned int lcd_clk, div;
/* Get clock from sysclk2 */
lcd_clk = clk_get(2);
div = lcd_clk / par->pxl_clk;
debug("LCD Clock: 0x%x Divider: 0x%x PixClk: 0x%x\n",
lcd_clk, div, par->pxl_clk);
/* Configure the LCD clock divisor. */
lcdc_write(LCD_CLK_DIVISOR(div) |
(LCD_RASTER_MODE & 0x1), &da8xx_fb_reg_base->ctrl);
}
static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
const struct da8xx_panel *panel)
{
u32 bpp;
int ret = 0;
lcd_reset(par);
/* Calculate the divider */
lcd_calc_clk_divider(par);
if (panel->invert_pxl_clk)
lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_timing_2) |
LCD_INVERT_PIXEL_CLOCK),
&da8xx_fb_reg_base->raster_timing_2);
else
lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_timing_2) &
~LCD_INVERT_PIXEL_CLOCK),
&da8xx_fb_reg_base->raster_timing_2);
/* Configure the DMA burst size. */
ret = lcd_cfg_dma(cfg->dma_burst_sz);
if (ret < 0)
return ret;
/* Configure the AC bias properties. */
lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt);
/* Configure the vertical and horizontal sync properties. */
lcd_cfg_vertical_sync(panel->vbp, panel->vsw, panel->vfp);
lcd_cfg_horizontal_sync(panel->hbp, panel->hsw, panel->hfp);
/* Configure for disply */
ret = lcd_cfg_display(cfg);
if (ret < 0)
return ret;
if (QVGA != cfg->p_disp_panel->panel_type)
return -EINVAL;
if (cfg->bpp <= cfg->p_disp_panel->max_bpp &&
cfg->bpp >= cfg->p_disp_panel->min_bpp)
bpp = cfg->bpp;
else
bpp = cfg->p_disp_panel->max_bpp;
if (bpp == 12)
bpp = 16;
ret = lcd_cfg_frame_buffer(par, (unsigned int)panel->width,
(unsigned int)panel->height, bpp,
cfg->raster_order);
if (ret < 0)
return ret;
/* Configure FDD */
lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & 0xfff00fff) |
(cfg->fdd << 12), &da8xx_fb_reg_base->raster_ctrl);
return 0;
}
static void lcdc_dma_start(void)
{
struct da8xx_fb_par *par = da8xx_fb_info->par;
lcdc_write(par->dma_start,
&da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
lcdc_write(par->dma_end,
&da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
lcdc_write(0,
&da8xx_fb_reg_base->dma_frm_buf_base_addr_1);
lcdc_write(0,
&da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1);
}
static u32 lcdc_irq_handler(void)
{
struct da8xx_fb_par *par = da8xx_fb_info->par;
u32 stat = lcdc_read(&da8xx_fb_reg_base->stat);
u32 reg_ras;
if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
debug("LCD_SYNC_LOST\n");
lcd_disable_raster();
lcdc_write(stat, &da8xx_fb_reg_base->stat);
lcd_enable_raster();
return LCD_SYNC_LOST;
} else if (stat & LCD_PL_LOAD_DONE) {
debug("LCD_PL_LOAD_DONE\n");
/*
* Must disable raster before changing state of any control bit.
* And also must be disabled before clearing the PL loading
* interrupt via the following write to the status register. If
* this is done after then one gets multiple PL done interrupts.
*/
lcd_disable_raster();
lcdc_write(stat, &da8xx_fb_reg_base->stat);
/* Disable PL completion inerrupt */
reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
reg_ras &= ~LCD_PL_ENABLE;
lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl);
/* Setup and start data loading mode */
lcd_blit(LOAD_DATA, par);
return LCD_PL_LOAD_DONE;
} else {
lcdc_write(stat, &da8xx_fb_reg_base->stat);
if (stat & LCD_END_OF_FRAME0)
debug("LCD_END_OF_FRAME0\n");
lcdc_write(par->dma_start,
&da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
lcdc_write(par->dma_end,
&da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
par->vsync_flag = 1;
return LCD_END_OF_FRAME0;
}
return stat;
}
static u32 wait_for_event(u32 event)
{
u32 timeout = 50000;
u32 ret;
do {
ret = lcdc_irq_handler();
udelay(1000);
} while (!(ret & event));
if (timeout <= 0) {
printf("%s: event %d not hit\n", __func__, event);
return -1;
}
return 0;
}
void *video_hw_init(void)
{
struct da8xx_fb_par *par;
u32 size;
char *p;
if (!lcd_panel) {
printf("Display not initialized\n");
return NULL;
}
gpanel.winSizeX = lcd_panel->width;
gpanel.winSizeY = lcd_panel->height;
gpanel.plnSizeX = lcd_panel->width;
gpanel.plnSizeY = lcd_panel->height;
switch (bits_x_pixel) {
case 24:
gpanel.gdfBytesPP = 4;
gpanel.gdfIndex = GDF_32BIT_X888RGB;
break;
case 16:
gpanel.gdfBytesPP = 2;
gpanel.gdfIndex = GDF_16BIT_565RGB;
break;
default:
gpanel.gdfBytesPP = 1;
gpanel.gdfIndex = GDF__8BIT_INDEX;
break;
}
da8xx_fb_reg_base = (struct da8xx_lcd_regs *)DAVINCI_LCD_CNTL_BASE;
debug("Resolution: %dx%d %x\n",
gpanel.winSizeX,
gpanel.winSizeY,
lcd_cfg.bpp);
size = sizeof(struct fb_info) + sizeof(struct da8xx_fb_par);
da8xx_fb_info = malloc(size);
debug("da8xx_fb_info at %x\n", (unsigned int)da8xx_fb_info);
if (!da8xx_fb_info) {
printf("Memory allocation failed for fb_info\n");
return NULL;
}
memset(da8xx_fb_info, 0, size);
p = (char *)da8xx_fb_info;
da8xx_fb_info->par = p + sizeof(struct fb_info);
debug("da8xx_par at %x\n", (unsigned int)da8xx_fb_info->par);
par = da8xx_fb_info->par;
par->pxl_clk = lcd_panel->pxl_clk;
if (lcd_init(par, &lcd_cfg, lcd_panel) < 0) {
printf("lcd_init failed\n");
goto err_release_fb;
}
/* allocate frame buffer */
par->vram_size = lcd_panel->width * lcd_panel->height * lcd_cfg.bpp;
par->vram_size = par->vram_size * LCD_NUM_BUFFERS / 8;
par->vram_virt = malloc(par->vram_size);
par->vram_phys = (dma_addr_t) par->vram_virt;
debug("Requesting 0x%x bytes for framebuffer at 0x%x\n",
(unsigned int)par->vram_size,
(unsigned int)par->vram_virt);
if (!par->vram_virt) {
printf("GLCD: malloc for frame buffer failed\n");
goto err_release_fb;
}
gpanel.frameAdrs = (unsigned int)par->vram_virt;
da8xx_fb_info->screen_base = (char *) par->vram_virt;
da8xx_fb_fix.smem_start = gpanel.frameAdrs;
da8xx_fb_fix.smem_len = par->vram_size;
da8xx_fb_fix.line_length = (lcd_panel->width * lcd_cfg.bpp) / 8;
par->dma_start = par->vram_phys;
par->dma_end = par->dma_start + lcd_panel->height *
da8xx_fb_fix.line_length - 1;
/* allocate palette buffer */
par->v_palette_base = malloc(PALETTE_SIZE);
if (!par->v_palette_base) {
printf("GLCD: malloc for palette buffer failed\n");
goto err_release_fb_mem;
}
memset(par->v_palette_base, 0, PALETTE_SIZE);
par->p_palette_base = (unsigned int)par->v_palette_base;
/* Initialize par */
da8xx_fb_info->var.bits_per_pixel = lcd_cfg.bpp;
da8xx_fb_var.xres = lcd_panel->width;
da8xx_fb_var.xres_virtual = lcd_panel->width;
da8xx_fb_var.yres = lcd_panel->height;
da8xx_fb_var.yres_virtual = lcd_panel->height * LCD_NUM_BUFFERS;
da8xx_fb_var.grayscale =
lcd_cfg.p_disp_panel->panel_shade == MONOCHROME ? 1 : 0;
da8xx_fb_var.bits_per_pixel = lcd_cfg.bpp;
da8xx_fb_var.hsync_len = lcd_panel->hsw;
da8xx_fb_var.vsync_len = lcd_panel->vsw;
/* Initialize fbinfo */
da8xx_fb_info->flags = FBINFO_FLAG_DEFAULT;
da8xx_fb_info->fix = da8xx_fb_fix;
da8xx_fb_info->var = da8xx_fb_var;
da8xx_fb_info->pseudo_palette = par->pseudo_palette;
da8xx_fb_info->fix.visual = (da8xx_fb_info->var.bits_per_pixel <= 8) ?
FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
/* Clear interrupt */
memset((void *)par->vram_virt, 0, par->vram_size);
lcd_disable_raster();
lcdc_write(0xFFFF, &da8xx_fb_reg_base->stat);
debug("Palette at 0x%x size %d\n", par->p_palette_base,
par->palette_sz);
lcdc_dma_start();
/* Load a default palette */
fb_setcolreg(0, 0, 0, 0, 0xffff, da8xx_fb_info);
/* Check that the palette is loaded */
wait_for_event(LCD_PL_LOAD_DONE);
/* Wait until DMA is working */
wait_for_event(LCD_END_OF_FRAME0);
return (void *)&gpanel;
err_release_fb_mem:
free(par->vram_virt);
err_release_fb:
free(da8xx_fb_info);
return NULL;
}
void video_set_lut(unsigned int index, /* color number */
unsigned char r, /* red */
unsigned char g, /* green */
unsigned char b /* blue */
)
{
return;
}
void da8xx_video_init(const struct da8xx_panel *panel, int bits_pixel)
{
lcd_panel = panel;
bits_x_pixel = bits_pixel;
}