mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-26 05:34:30 +08:00
14d0a02a16
The change is currently needed to be able to remove the board configuration scripting from the top level Makefile and replace it by a simple, table driven script. Moving this configuration setting into the "CONFIG_*" name space is also desirable because it is needed if we ever should move forward to a Kconfig driven configuration system. Signed-off-by: Wolfgang Denk <wd@denx.de>
396 lines
8.8 KiB
ArmAsm
396 lines
8.8 KiB
ArmAsm
/*
|
|
* Board specific setup info
|
|
*
|
|
* (C) Copyright 2003-2004
|
|
*
|
|
* Texas Instruments, <www.ti.com>
|
|
* Kshitij Gupta <Kshitij@ti.com>
|
|
*
|
|
* Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004
|
|
*
|
|
* Modified for OMAP730 P2 Board by Dave Peverley, MPC-Data Limited
|
|
* (http://www.mpc-data.co.uk)
|
|
*
|
|
* TODO : Tidy up and change to use system register defines
|
|
* from omap730.h where possible.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
|
|
#if defined(CONFIG_OMAP730)
|
|
#include <./configs/omap730.h>
|
|
#endif
|
|
|
|
_TEXT_BASE:
|
|
.word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
|
|
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
/* Save callers address in r11 - r11 must never be modified */
|
|
mov r11, lr
|
|
|
|
/*------------------------------------------------------*
|
|
*mask all IRQs by setting all bits in the INTMR default*
|
|
*------------------------------------------------------*/
|
|
mov r1, #0xffffffff
|
|
ldr r0, =REG_IHL1_MIR
|
|
str r1, [r0]
|
|
ldr r0, =REG_IHL2_MIR
|
|
str r1, [r0]
|
|
|
|
/*------------------------------------------------------*
|
|
* Set up ARM CLM registers (IDLECT1) *
|
|
*------------------------------------------------------*/
|
|
ldr r0, REG_ARM_IDLECT1
|
|
ldr r1, VAL_ARM_IDLECT1
|
|
str r1, [r0]
|
|
|
|
/*------------------------------------------------------*
|
|
* Set up ARM CLM registers (IDLECT2) *
|
|
*------------------------------------------------------*/
|
|
ldr r0, REG_ARM_IDLECT2
|
|
ldr r1, VAL_ARM_IDLECT2
|
|
str r1, [r0]
|
|
|
|
/*------------------------------------------------------*
|
|
* Set up ARM CLM registers (IDLECT3) *
|
|
*------------------------------------------------------*/
|
|
ldr r0, REG_ARM_IDLECT3
|
|
ldr r1, VAL_ARM_IDLECT3
|
|
str r1, [r0]
|
|
|
|
|
|
mov r1, #0x01 /* PER_EN bit */
|
|
ldr r0, REG_ARM_RSTCT2
|
|
strh r1, [r0] /* CLKM; Peripheral reset. */
|
|
|
|
/* Set CLKM to Sync-Scalable */
|
|
/* I supposedly need to enable the dsp clock before switching */
|
|
mov r1, #0x1000
|
|
ldr r0, REG_ARM_SYSST
|
|
strh r1, [r0]
|
|
mov r0, #0x400
|
|
1:
|
|
subs r0, r0, #0x1 /* wait for any bubbles to finish */
|
|
bne 1b
|
|
ldr r1, VAL_ARM_CKCTL
|
|
ldr r0, REG_ARM_CKCTL
|
|
strh r1, [r0]
|
|
|
|
/* a few nops to let settle */
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
|
|
/* setup DPLL 1 */
|
|
/* Ramp up the clock to 96Mhz */
|
|
ldr r1, VAL_DPLL1_CTL
|
|
ldr r0, REG_DPLL1_CTL
|
|
strh r1, [r0]
|
|
ands r1, r1, #0x10 /* Check if PLL is enabled. */
|
|
beq lock_end /* Do not look for lock if BYPASS selected */
|
|
2:
|
|
ldrh r1, [r0]
|
|
ands r1, r1, #0x01 /* Check the LOCK bit.*/
|
|
beq 2b /* loop until bit goes hi. */
|
|
lock_end:
|
|
|
|
/*------------------------------------------------------*
|
|
* Turn off the watchdog during init... *
|
|
*------------------------------------------------------*/
|
|
ldr r0, REG_WATCHDOG
|
|
ldr r1, WATCHDOG_VAL1
|
|
str r1, [r0]
|
|
ldr r1, WATCHDOG_VAL2
|
|
str r1, [r0]
|
|
ldr r0, REG_WSPRDOG
|
|
ldr r1, WSPRDOG_VAL1
|
|
str r1, [r0]
|
|
ldr r0, REG_WWPSDOG
|
|
|
|
watch1Wait:
|
|
ldr r1, [r0]
|
|
tst r1, #0x10
|
|
bne watch1Wait
|
|
|
|
ldr r0, REG_WSPRDOG
|
|
ldr r1, WSPRDOG_VAL2
|
|
str r1, [r0]
|
|
ldr r0, REG_WWPSDOG
|
|
watch2Wait:
|
|
ldr r1, [r0]
|
|
tst r1, #0x10
|
|
bne watch2Wait
|
|
|
|
/* Set memory timings corresponding to the new clock speed */
|
|
|
|
/* Check execution location to determine current execution location
|
|
* and branch to appropriate initialization code.
|
|
*/
|
|
/* Compare physical SDRAM base & current execution location. */
|
|
and r0, pc, #0xF0000000
|
|
/* Compare. */
|
|
cmp r0, #0
|
|
/* Skip over EMIF-fast initialization if running from SDRAM. */
|
|
bne skip_sdram
|
|
|
|
/*
|
|
* Delay for SDRAM initialization.
|
|
*/
|
|
mov r3, #0x1800 /* value should be checked */
|
|
3:
|
|
subs r3, r3, #0x1 /* Decrement count */
|
|
bne 3b
|
|
|
|
ldr r0, REG_SDRAM_CONFIG
|
|
ldr r1, SDRAM_CONFIG_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, REG_SDRAM_MRS_LEGACY
|
|
ldr r1, SDRAM_MRS_VAL
|
|
str r1, [r0]
|
|
|
|
skip_sdram:
|
|
|
|
common_tc:
|
|
/* slow interface */
|
|
ldr r1, VAL_TC_EMIFS_CS0_CONFIG
|
|
ldr r0, REG_TC_EMIFS_CS0_CONFIG
|
|
str r1, [r0] /* Chip Select 0 */
|
|
|
|
ldr r1, VAL_TC_EMIFS_CS1_CONFIG
|
|
ldr r0, REG_TC_EMIFS_CS1_CONFIG
|
|
str r1, [r0] /* Chip Select 1 */
|
|
ldr r1, VAL_TC_EMIFS_CS2_CONFIG
|
|
ldr r0, REG_TC_EMIFS_CS2_CONFIG
|
|
str r1, [r0] /* Chip Select 2 */
|
|
ldr r1, VAL_TC_EMIFS_CS3_CONFIG
|
|
ldr r0, REG_TC_EMIFS_CS3_CONFIG
|
|
str r1, [r0] /* Chip Select 3 */
|
|
|
|
/* 48MHz clock request for UART1 */
|
|
ldr r1, PERSEUS2_CONFIG_BASE
|
|
ldrh r0, [r1, #CONFIG_PCC_CONF]
|
|
orr r0, r0, #CONF_MOD_UART1_CLK_MODE_R
|
|
strh r0, [r1, #CONFIG_PCC_CONF]
|
|
|
|
/* Initialize public and private rheas
|
|
* - set access factor 2 on both rhea / strobe
|
|
* - disable write buffer on strb0, enable write buffer on strb1
|
|
*/
|
|
|
|
ldr R0, REG_RHEA_PUB_CTL
|
|
ldr R1, REG_RHEA_PRIV_CTL
|
|
ldr R2, VAL_RHEA_CTL
|
|
strh R2, [R0]
|
|
strh R2, [R1]
|
|
mov R3, #2 /* disable write buffer on strb0, enable write buffer on strb1 */
|
|
strh R3, [R0, #0x08] /* arm rhea control reg */
|
|
strh R3, [R1, #0x08]
|
|
|
|
/* enable IRQ and FIQ */
|
|
|
|
mrs r4, CPSR
|
|
bic r4, r4, #IRQ_MASK
|
|
bic r4, r4, #FIQ_MASK
|
|
msr CPSR, r4
|
|
|
|
/* set TAP CONF to TRI EMULATION */
|
|
|
|
ldr r1, [r0, #CONFIG_MODE2]
|
|
bic r1, r1, #0x18
|
|
orr r1, r1, #0x10
|
|
str r1, [r0, #CONFIG_MODE2]
|
|
|
|
/* set tdbgen to 1 */
|
|
|
|
ldr r0, PERSEUS2_CONFIG_BASE
|
|
ldr r1, [r0, #CONFIG_MODE1]
|
|
mov r2, #0x10000
|
|
orr r1, r1, r2
|
|
str r1, [r0, #CONFIG_MODE1]
|
|
|
|
#ifdef CONFIG_P2_OMAP1610
|
|
/* inserting additional 2 clock cycle hold time for LAN */
|
|
ldr r0, REG_TC_EMIFS_CS1_ADVANCED
|
|
ldr r1, VAL_TC_EMIFS_CS1_ADVANCED
|
|
str r1, [r0]
|
|
#endif
|
|
/* Start MPU Timer 1 */
|
|
ldr r0, REG_MPU_LOAD_TIMER
|
|
ldr r1, VAL_MPU_LOAD_TIMER
|
|
str r1, [r0]
|
|
|
|
ldr r0, REG_MPU_CNTL_TIMER
|
|
ldr r1, VAL_MPU_CNTL_TIMER
|
|
str r1, [r0]
|
|
|
|
/* back to arch calling code */
|
|
mov pc, r11
|
|
|
|
/* the literal pools origin */
|
|
.ltorg
|
|
|
|
REG_TC_EMIFS_CONFIG: /* 32 bits */
|
|
.word 0xfffecc0c
|
|
REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */
|
|
.word 0xfffecc10
|
|
REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */
|
|
.word 0xfffecc14
|
|
REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */
|
|
.word 0xfffecc18
|
|
REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */
|
|
.word 0xfffecc1c
|
|
|
|
#ifdef CONFIG_P2_OMAP730
|
|
REG_TC_EMIFS_CS1_ADVANCED: /* 32 bits */
|
|
.word 0xfffecc54
|
|
#endif
|
|
|
|
/* MPU clock/reset/power mode control registers */
|
|
REG_ARM_CKCTL: /* 16 bits */
|
|
.word 0xfffece00
|
|
|
|
REG_ARM_IDLECT3: /* 16 bits */
|
|
.word 0xfffece24
|
|
REG_ARM_IDLECT2: /* 16 bits */
|
|
.word 0xfffece08
|
|
REG_ARM_IDLECT1: /* 16 bits */
|
|
.word 0xfffece04
|
|
|
|
REG_ARM_RSTCT2: /* 16 bits */
|
|
.word 0xfffece14
|
|
REG_ARM_SYSST: /* 16 bits */
|
|
.word 0xfffece18
|
|
/* DPLL control registers */
|
|
REG_DPLL1_CTL: /* 16 bits */
|
|
.word 0xfffecf00
|
|
|
|
/* Watch Dog register */
|
|
/* secure watchdog stop */
|
|
REG_WSPRDOG:
|
|
.word 0xfffeb048
|
|
/* watchdog write pending */
|
|
REG_WWPSDOG:
|
|
.word 0xfffeb034
|
|
|
|
WSPRDOG_VAL1:
|
|
.word 0x0000aaaa
|
|
WSPRDOG_VAL2:
|
|
.word 0x00005555
|
|
|
|
/* SDRAM config is: auto refresh enabled, 16 bit 4 bank,
|
|
counter @8192 rows, 10 ns, 8 burst */
|
|
REG_SDRAM_CONFIG:
|
|
.word 0xfffecc20
|
|
|
|
REG_SDRAM_MRS_LEGACY:
|
|
.word 0xfffecc24
|
|
|
|
REG_WATCHDOG:
|
|
.word 0xfffec808
|
|
|
|
REG_MPU_LOAD_TIMER:
|
|
.word 0xfffec504
|
|
REG_MPU_CNTL_TIMER:
|
|
.word 0xfffec500
|
|
|
|
/* Public and private rhea bridge registers definition */
|
|
|
|
REG_RHEA_PUB_CTL:
|
|
.word 0xFFFECA00
|
|
|
|
REG_RHEA_PRIV_CTL:
|
|
.word 0xFFFED300
|
|
|
|
/* EMIFF SDRAM Configuration register
|
|
- self refresh disable
|
|
- auto refresh enabled
|
|
- SDRAM type 64 Mb, 16 bits bus 4 banks
|
|
- power down enabled
|
|
- SDRAM clock disabled
|
|
*/
|
|
SDRAM_CONFIG_VAL:
|
|
.word 0x0C017DF4
|
|
|
|
/* Burst full page length ; cas latency = 3 */
|
|
SDRAM_MRS_VAL:
|
|
.word 0x00000037
|
|
|
|
VAL_ARM_CKCTL:
|
|
.word 0x6505
|
|
VAL_DPLL1_CTL:
|
|
.word 0x3412
|
|
|
|
#ifdef CONFIG_P2_OMAP730
|
|
VAL_TC_EMIFS_CS0_CONFIG:
|
|
.word 0x0000FFF3
|
|
VAL_TC_EMIFS_CS1_CONFIG:
|
|
.word 0x00004278
|
|
VAL_TC_EMIFS_CS2_CONFIG:
|
|
.word 0x00004278
|
|
VAL_TC_EMIFS_CS3_CONFIG:
|
|
.word 0x00004278
|
|
VAL_TC_EMIFS_CS1_ADVANCED:
|
|
.word 0x00000022
|
|
#endif
|
|
|
|
VAL_ARM_IDLECT1:
|
|
.word 0x00000400
|
|
VAL_ARM_IDLECT2:
|
|
.word 0x00000886
|
|
VAL_ARM_IDLECT3:
|
|
.word 0x00000015
|
|
|
|
WATCHDOG_VAL1:
|
|
.word 0x000000f5
|
|
WATCHDOG_VAL2:
|
|
.word 0x000000a0
|
|
|
|
VAL_MPU_LOAD_TIMER:
|
|
.word 0xffffffff
|
|
VAL_MPU_CNTL_TIMER:
|
|
.word 0xffffffa1
|
|
|
|
VAL_RHEA_CTL:
|
|
.word 0xFF22
|
|
|
|
/* Config Register vals */
|
|
PERSEUS2_CONFIG_BASE:
|
|
.word 0xFFFE1000
|
|
|
|
.equ CONFIG_PCC_CONF, 0xB4
|
|
.equ CONFIG_MODE1, 0x10
|
|
.equ CONFIG_MODE2, 0x14
|
|
.equ CONF_MOD_UART1_CLK_MODE_R, 0x0A
|
|
|
|
/* misc values */
|
|
.equ IRQ_MASK, 0x80 /* IRQ mask value */
|
|
.equ FIQ_MASK, 0x40 /* FIQ mask value */
|